The SX2-12B
is a single housing water treatment system
ScaleX2
®
Snapshot
Foodservice Filtration Systems
Model: SX2-12B
Part #: 160-50144
ITEM #: __________________ QTY: ________
JOB NAME/NUMBER_____________________
with a drop in 4.5” x 20” cartridge. The system utilizes
ScaleX2
®
, a chemical-free scale inhibition technology
that utilizes Template Induced Crystallization to effectively
inhibit the formation of calcium-carbonate scale. The
SX2-12B is ideal for applications requiring up to 4 gpm
ow. In most cases, the cartridge will perfrom for one-year
between lter changes.
System Bene ts
l
tested by an independent laboratory against the
international protocol for scale prevention.
l
Protects boilers, steam generators, and water heaters
against the formation and accumulation of calciumcarbonate scale.
l
Reduces maintenance frequency and cost, and extends
equipment life.
l
Sturdy mounting bracket and full- ow inlet shut-off
valve makes installation simple.
l
Inlet shut-off and depressurization valve make changing
the lter quick and simple.
Application
STEAM & COMBI OVENS
to 2 gpm. Not recommended for ‘ ash’ type (boilerless) combi
ovens.
WATER HEATERS - TANKLESS & CONVENTIONAL
- Up to 4 gpm service ow.
-
boilers or steam generators up
l
Generates less waste, only the drop-in lter is replaced.
No discarding of metal or plastic quick-change lters.
Installation Tips
l
Feed-water connection to system should be COLD only.
l
Do not exceed system speci cations for temperature
and pressure.
l
Allow 3” clearance below system for lter housing
removal and cartridge replacement.
l
Connect ltered water line to ice and steam production
connections only. Do not use for condenser water.
l
Detailed installation, operation & maintenance manual
is included with each system
l
No activation procedure or ushing is required for
system to perform as speci ed.
.
Model: SX2-12B
Foodservice Filtration S y s t e m s
COMPONENT
Part #: 160-50144
Specications
System
Dimensions
(Height x Width X Depth, inches)
Connection - Inlet & Outlet 3/4” NPT female
Operating Pressure Range 10-125 psi
Inlet Water Temperature Range 35
Shipping Weight 13 lbs.
Performance
Chlorine, Taste and Odor
Reduction Capacity N/A
Service Flow Rate 4.0 gpm
Sediment Reduction N/A
Scale Inhibitor ScaleX2
28 3/8” x 9 3/4”
x 8”
(0.7 -8.6 bar)
o
o
-100
F
o
(2o -38
C)
(15.2 lpm)
®
The ScaleX2 element is tested and
certied by NSF International against
NSF/ANSI Standard 42 for material
requirements only.
Dealer/Distributor Info:
Replacement Cartridge(s)
Model Part Number Qty
SCLX2-4 252-60220 1
In most applications, the ScaleX2 cartridge should be
changed annually.
This product is for commercial use only and must be
installed
and maintained according to manufacturers
guidelines.
Do not use on water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or
after the system.
Warranty
Systems have a 3 year warranty against defects in
material and workmanship. For complete warranty
information contact OptiPure customer service or go to
www.optipurewater.com.
OptiPure, Mfg. by Procam Controls, Inc.
2605 Technology Dr., Bldg 300
Plano, TX 75074
p: 972.881.9797; f: 972.422.6262
www.optipurewater.com
SX2-12Bspec109
Loading...