Page 1
The SX2-11
is a single housing water treatment system
ScaleX2
®
Snapshot
Foodservice Filtration Systems
with a drop-in 10” cartridge. The system utilizes ScaleX2®,
a chemical-free scale inhibition technology that utilizes
Template Induced Crystallization to effectively inhibit the
formation of calcium-carbonate scale. The SX2-11 is ideal
for applications requiring up to 1 1/2 gpm ow. In most
cases the cartridge will perform for one-year between lter
changes.
System Bene ts
Model: SX2-11
Part #: 160-50131
ITEM #: __________________ QTY: ________
JOB NAME/NUMBER_____________________
l
, acheived a 99.6% effectiveness rating when
tested by an independent laboratory against the
international protocol for scale prevention.
l
Protects boilers, steam generators, and coffee equipment
against the formation and accumulation of calciumcarbonate scale.
l
Reduces maintenance frequency and cost, and extends
equipment life.
l
Sturdy mounting bracket and full- ow inlet shut-off valve
makes installation simple.
l
Inlet shut-off and depressurization valve make changing
the lter quick and simple.
l
Generates less waste, only the drop-in lter is replaced.
No discarding of metal or plastic quick-change lters.
Application
STEAM & COMBI OVENS
up to 1.5 gpm. Not recommended for ‘ ash’ type (boilerless)
combi ovens.
COFFEE BREWERS
up to 1.5 gpm.
COMBINATION
a primary ltration system. Do not use ScaleX2 with any type
of polyphosphate based scale inhibitor lter.
- Can be used down-line in conjunction with
-
boilers or steam generators
- Single or combination applications
Installation Tips
l
Feed-water connection to system should be COLD only.
l
Do not exceed system speci cations for temperature
and pressure.
l
Allow 3” clearance below system for lter housing
removal and cartridge replacement.
l
Connect ltered water line to ice and steam production
connections only. Do not use for condenser water.
l
Detailed installation, operation & maintenance manual
is included with each system.
l
No activation procedure or ushing is required for
system to perform as speci ed.
Page 2
Model: SX2-11
Foodservice Filtration S y s t e m s
COMPONENT
Part #: 160-50131
Specications
System
Dimensions
(Height x Width X Depth, inches)
Connection - Inlet & Outlet 1/2” NPT female
Operating Pressure Range 10-125 psi
Inlet Water Temperature Range 35o -100
Shipping Weight 6 lbs.
Performance
Chlorine, Taste and Odor
Reduction Capacity N/A
Service Flow Rate 1.5 gpm
Sediment Reduction N/A
Scale Inhibitor ScaleX2
14 1/2” x 6 9/16”
x 5 3/4”
(0.7 -8.6 bar)
o
F
o
(2o -38
C)
(5.7 lpm)
®
The ScaleX2 element is tested and
certied by NSF International against
NSF/ANSI Standard 42 for material
requirements only.
Dealer/Distributor Info:
Replacement Cartridge(s)
Model Part Number Qty
SCLX2-1 252-60205 1
In most applications, the ScaleX2 cartridge should be
changed annually.
This product is for commercial use only and must be
installed
and maintained according to manufacturers
guidelines.
Do not use on water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or
after the system.
Warranty
Systems have a 3 year warranty against defects in
material and workmanship. For complete warranty
information contact OptiPure customer service or go to
www.optipurewater.com.
OptiPure, Mfg. by Procam Controls, Inc.
2605 Technology Dr., Bldg 300
Plano, TX 75074
p: 972.881.9797; f: 972.422.6262
www.optipurewater.com
SX2-11spec109
Loading...