Page 1
Foodservice Filtration Systems
Snapshot
The OptiPure QT3MP Multi-Point filtration system
provides a combination of filters to meet the
requirements of different equipment applications
including fountain beverages, ice and coffee. The
four cartridge system includes three ‘primary’ QuikTwist (QT) cartridges that reduce sediment down
to 0.5 micron and reduces chlorine, taste & odor at
a combined flow rate of up to 6.75 gpm for 67,500.
The fourth QT cartridge is a ‘secondary’ filter that
provides added scale protection with IsoNet® for ice
machines and coffee brewers.
Model: QT3MP
Part #: 160-52070
ITEM #: __________________ QTY: ________
JOB NAME/NUMBER_____________________
System Benefits
Dual system outlets provide ‘primary’ filtration for cold
beverages and additional ‘secondary’ filtration for ice
machines and coffee brewers.
All system cartriges are 1/4 turn ‘Qwik-Twist’ cartridges
to make changing the filters quick, easy and sanitary. No
clear sumps or drop-in style filters to replace.
Primary filtration takes out dirt, rust and other debris as
small as 1/2 micron to assure clean, clear water and to
protect solenoids, valves and other fittings against wear
and plugging.
Primary filtration includes high capacity activated carbon
to reduce chlorine, taste & odor to make great tasting
beverages.
Secondary filtration provided the added protection of
IsoNet® - OptiPure patented scale inhibiting technology
protects ice and coffee equipment from scale and
corrosion.
Improves the quality and consistency of cold and hot
beverages and ice.
Reduces maintenance frequency and cost, and extends
equipment life.
Application
COMBINATION APPLICATIONS - For use with
multiple equipment applications where combined
filtration technologies are needed to provide water for
different types of equipment including fountain and cold
beverages, ice machines and coffee brewers.
Installation Tips
Feed-water connection to system should be COLD only.
Do not exceed system specifications for temperature
and pressure.
Allow 3” clearance below system for filter cartridge
removal and replacement.
Compact design, heavy duty mounting bracket and full-
flow inlet & outlet shut-off valve makes installation simple.
Built-in pressure gauge allows visual monitoring of
operating pressure.
Detailed installation, operation & maintenance manual
is included with each system
No activation procedure or flushing is required for
.
system to perform as specified.
Page 2
Feed-Water
Inlet
Foodservice Filtration Systems
Filtered-Water
Outlet to Ice,
Coffee
Model: QT3MP
Part #: 160-52070
Specifications
System
Dimensions
(Height x Width X Depth, inches)
Connection - Inlet & Outlet 1/2” NFPT
Operating Pressure Range 10-125 psi
Inlet Water Temperature Range 35
Shipping Weight 25 lbs.
Performance
Chlorine, Taste and Odor
Reduction Capacity
Service Flow Rate 6.75 gpm
Sediment Reduction .5 micron
Scale & Corrosion Inhibitor IsoNet
Optional Flush Valve Kit - Part #: 160-52912
22.5” x 20.3” x 9.3”
(0.7 -8.6 bar)
o
-100
(2o -38
67,500 gals.
(255,478 liters)
(25.5 lpm)
(nominal)
(100 grams)
o
F
o
C)
Dealer/Distributor Info:
Filtered-Water
Outlet
to Beverages
Replacement Cartridge(s)
Model Part Number Qty
CTO-Q 300-08115 3
PTS-Q 300-08215 1
It is recommended that filters be changed every six
months, when capacity is reached or when effluent
pressure or flow becomes inadequate.
This product is for commercial use only and must be
installed
and maintained according to manufacturers
guidelines.
Do not use on water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or
after the system.
Warranty
Systems have a 3 year warranty against defects in
material and workmanship. For complete warranty
information contact OptiPure customer service or go to
www.optipurewater.com.
OptiPure
div. of Procam Controls, Inc.
2605 Technology Dr., Bldg 300 Plano, TX 75074
p: 972.881.9797; f: 972.422.6262
www.optipurewater.com
QT3MPspec814
Loading...