Page 1
The QT10-1
is a single cartridge water treatment system
Snapshot
Foodservice Filtration Systems
with a 10” Qwik-Twist cartridge that reduces sediment down
to 0.5 micron and reduces chlorine, taste & odor at a ow
rate of 1.5 gpm for 15,000 gallons.
System Bene ts
Model: QT10-1
Part #: 160-52009
ITEM #: __________________ QTY: ________
JOB NAME/NUMBER_____________________
• Improves the quality and consistency of cold and hot
beverages.
•
Reduces maintenance frequency and cost, and extends
equipment life.
•
Gradient-density depth ltration reduces dirt, rust, and
other debris as small as 1/2 micron to assure clean, clear
water and protect solenoids, valves and other ttings
against wear and plugging.
•
High capacity activated carbon ltration makes water taste
great and protects equipment against corrosive chlorine.
•
Reduced sediment, chlorine and taste & odor can improve
beverage ingredient ef ciency.
•
Mounting bracket and full- ow inlet shut-off valve makes
installation simple.
•
1/4 turn QT ‘Qwik-Twist’ bayonet cartridges makes
changing the lter quick, easy and sanitary.
•
NSF Certi ed under Standard 42.
Application
FOUNTAIN BEVERAGES - Up to 50 bag-in-box per
month / single carbonator.
COFFEE & TEA - Applications up to 1.5 gpm where
water hardness is not a problem.
DRINKING WATER - Up to 1.5 gpm ow rate.
Installation Tips
•
Feed-water connection to system should be COLD only.
•
Do not exceed system speci cations for temperature
and pressure.
•
Allow 3” clearance below system for cartridge
removal and replacement.
•
Detailed installation, operation & maintenance manual
is included with each system.
•
No activation procedure or ushing is required for
system to perform as speci ed.
Page 2
Model: QT10-1
Foodservice Filtration S y s t e m s
Part #: 160-52009
Specications
System
Dimensions
(Height x Width X Depth, inches
Connection - Inlet & Outlet 3/8” NFPT
Operating Pressure Range 10-125 psi
Inlet Water Temperature Range 35o -100
Shipping Weight 3 lbs.
Performance
Chlorine, Taste and Odor
Reduction Capacity
Service Flow Rate 1.5 gpm
Sediment Reduction .5 micron
Scale & Corrosion Inhibitor N/A
15.13” x 5 13/16” x
4 1/8”
(0.7 -8.6 bar)
o
o
(2o -38
C)
15,000 gals.
(56,775 liters)
(5.7 lpm)
(nominal)
F
Model QT10-1 is tested and certied
by NSF International against NSF/ANSI
Standard 42 for the reduction of:
Standard 42: Aesthetic Effects,
Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class 1
Dealer/Distributor Info:
Optional Flush Valve Kit - Part #: 160-52912
Optional Gauge Kit - Part #: 160-52904
Replacement Cartridge(s)
Model Part Number Qty
CTO-Q10 300-05828 1
It is recommended that lters be changed every six
months, when capacity is reached or when efuent
pressure or ow becomes inadequate.
This product is for commercial use only and must be
installed
and maintained according to manufacturers
guidelines.
Do not use on water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or
after the system.
Warranty
Systems have a 3 year warranty against defects in
material and workmanship. Contact OptiPure customer
service or go to the OptiPure website for a copy of the
warranty.
OptiPure, Mfg. by Procam Controls, Inc.
2605 Technology Dr., Bldg 300
Plano, TX 75074
p: 972.881.9797; f: 972.422.6262
www.optipurewater.com
QT10-1spec109
Loading...