The OptiPure M-Series is a compact, selfcontained, advanced membrane separation
system. The OptiPure M-Series utilizes
advanced selective rejection membranes to
produce a large amount of optimized purity
water relative to its size. The standard
membrane provides 90-95% rejection of
feedwater contaminants with virtually all of
the hardness minerals rejected. The system
also removes foul tastes, odors, scale-causing
minerals, chlorine, chlorides, sulfates and
many other contaminants, yet leaves a trace
of minerals to prevent the problems
associated with very pure water with little
or no conductivity. (e.g. RO, distilled or
deionized water.)
Unique, compact design with large storage
capacity makes this system ideal for many
small commercial, industrial and lab
applications. Ideal applications include
the foodservice industry for steamers,
espresso machines, ice-machines, proofers
and ovens that experience water related
failures due to lime-scale build-up. This
system will remove virtually all of the
scaling minerals without adding anything
to the water. Another ideal application
for the M-Series is in the graphic arts
industries, where hardness and alkalinity
can cause real problems with chemistries
used in the printing processes.
OPTIMAL PURITY WATER
Pump driven for reliable performance
under any conditions. The OptiPure M-
Series utilizes a pump to feed the selective
rejection membranes to provide up to 150
gallons of optimized purity water/day*. The
small, efficient diaphragm pump boosts the
line pressure to 80 psi allowing a tank full
shut-off of 60 psi. The unique design
incorporates the storage tank, pump,
membrane and prefilters into one assembly
allowing for a very quick and easy installation.
Tanks are equipped with a pressurized bladder
that can provide outlet water pressure between
40 and 60 psi.
OptiPure M-Series
Optimum Purity Water
for low volume
applications.
OptiPure M-Series Specifications
OptiPure Features & Benefits
Model Dimensions Weight Tank
OPM 80/10 17”wide x 22” deep x 37”high. 60lbs. 10 gal. Tank
OPM 150/10 17”wide x 22” deep x 37”high. 60lbs. 10 gal. Tank
OPM 80/25 22”wide x 27” deep x 41”high. 110lbs. 25 gal. Tank
OPM 150/25 22”wide x 27” deep x 41”high. 110lbs. 25 gal. Tank
OPM 80/50 26”wide x 31” deep x 52”high. 150lbs. 50 gal. Tank
OPM 150/50 26”wide x 31” deep x 52”high. 150lbs. 50 gal. Tank
Operating parameters:
Production: OPM 80
Production:
OPM 150 123 gpd*, 5.1 gph (465 lpd, 19 lph)
80 gpd*, 3.3 gph (300 lpd, 12.5 lph)
Typical TDS rejection Low: 45-65%, Med: 85-95%. Hi 98+% **
Feed Temperature 40 - 100° F (4 - 38° C)
Feed pressure 0 - 75 psi at .5 gpm
* Production measured @ 65°F
** Three different membranes offer three different rejection profiles.
Rejection of scale forming minerals is typically > 95%.
Electrical: 115 VAC, 60 hz, 2A
Feedwater Inlet: 3/8” OD Polyethylene tubing. (8’ of tubing included in installation
package). User provides a 1/2” FPT connection on water supply
with full-flow ball valve. A 1/2” MPT x 3/8” speedfit tubing
adapter is included in the installation package.
Drain Line: 1/4”OD Polyethylene tubing (8’ of tubing included with unit).
▲ Self-Contained Design. No wall
mount or multiple pieces to install,
minimizes costs and time. Minimal
space required. Easy to relocate in
a changing environment.
▲ Selective Rejection Membranes.
A choice of membranes allows
removal of the chemicals and
minerals in the water that are
detrimental to the equipment.
Different types of membranes
including RO are available for
different applications.
▲ High Efficiency, High Flow
Booster Pump. Ensures maximum
production independent of feed
water pressure. Low energy
consumption and run-dry
capability provides a reliable, costefficient pump with the ability to
take abuse.
Product output: 1/2” Hose barb standard.
Optional 3/8” tubing connection available.
Pretreatment: Sediment Prefilter 10” - 1 micron PolyTrix PCG-01-98
Carbon Prefilter 10” - PCRX-10-97
Tank Construction:
NSF listed for RO Water Storage. Steel Tank with polyethylene liner, designed for
storage of pure water. Butyl diaphragm design provides minimal rubber/water
contact and allows for long life with complete water discharge. Steel tank has
appliance-like finish. Tank pressure gauge indicates when tank is full of product
water.
Options
• Different kinds of post-treatment are available for different applications.
• Additional membranes to increase production are available.
• Permeate pump to increase production.
The OptiPure M-Series is a product of:
The FilterXpress div. of Procam Controls, Inc.
2605 Technology Dr. Bldg. 300
Plano, TX 75074
Ph: 972.422.1212 Fax: 972.422.6262
web: www.filterxpress.com
▲ Simple Installation. Literally
takes only a few minutes to install,
enabling the user the flexibility to
move to different locations.
Reduces installation costs,
minimizing initial investment.
▲ Low-Voltage Operation.
Everything under the cover is 24
VAC for lower operating and service
costs plus increased safety.
▲ Provides Water with Near Zero
Hardness. Eliminates the scaling
potential of water while leaving trace
minerals for optimal results. Choice
of membranes makes it ideal for a
broad range of water characteristics
and/or applications.
© 2002 Procam Controls Inc.
Loading...