The FXTS-11
is a single housing water treatment system
Snapshot
Foodservice Filtration Systems
with a drop-in 10” cartridge that protects equipment
against damaging scale (lime scale) and takes out dirt and
sediment down to 5 micron. The system includes IsoNet®,
OptiPure’s patented scale inhibiting technology, which
delivers consistent protection against the precipitation and
accumulation of scale and provides a protective barrier to
help guard against corrosion.
System Bene ts
Model: FXTS-11
Part #: 160-50003
ITEM #: __________________ QTY: ________
JOB NAME/NUMBER_____________________
l
Protects equipment against scale and corrosion.
l
Reduces maintenance frequency and cost, and extends
equipment life.
l
Gradient-density depth ltration reduces dirt, rust, and
other debris as small as 5 micron to assure clean, clear
water and protect solenoids, valves and other ttings
against wear and plugging.
l
Sturdy mounting bracket and full- ow inlet shut-off valve
makes installation simple.
l
Only the drop-in cartridge is replaced. No discarding of
metal or plastic quick-change lters.
l
70 grams of IsoNet
®
provides consistent protection over
the life of the cartridge.
l
Chlorine remains in the water to help protect an ice
machine against microbial contamination when used as a
point-of-use lter.
Application
COMBINATION APPLICATIONS
Provides protection against scale and corrosion.
I
CE - Cubers up to 1,000 lbs. and akers up to 1,500 lbs.
- (Secondary Filtration)
Installation Tips
l
Feed-water connection to system should be COLD only.
l
Do not exceed system speci cations for temperature
and pressure.
l
Allow 3” clearance below system for lter housing
removal and cartridge replacement.
l
Connect ltered water line to ice and steam production
connections only. Do not use for condenser water.
l
Detailed installation, operation & maintenance manual
is included with each system.
l
No activation procedure or ushing is required for
system to perform as speci ed.
Model: FXTS-11
Foodservice Filtration S y s t e m s
Part #: 160-50003
Specications
System
Dimensions
(Height x Width X Depth, inches
Connection - Inlet & Outlet 1/2” NPT female
Operating Pressure Range 10-125 psi
Inlet Water Temperature Range 35o -100
Shipping Weight 6 lbs.
Performance
Chlorine, Taste and Odor
Reduction Capacity
Service Flow Rate 2.0 gpm
Sediment Reduction 5 micron
Scale & Corrosion Inhibitor IsoNet (70 grams)
14 1/2” x 6 9/16” x
5 1/8”
(0.7 -8.6 bar)
o
F
o
(2o -38
C)
20,000 gals
(75,708 liters)
(9.5 lpm)
(nominal)
Dealer/Distributor Info:
The FXTS-11 is Tested and Certied by NSF International against
NSF/ANSI Standard 42 for material
requirements only.
Replacement Cartridge(s)
Model Part Number Qty
PTS-10 252-10810 1
It is recommended that lters be changed every six
months, when capacity is reached or when efuent
pressure or ow becomes inadequate.
This product is for commercial use only and must be
installed
and maintained according to manufacturers
guidelines.
Do not use on water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or
after the system.
Warranty
Systems have a 3 year warranty against defects in
material and workmanship. For complete warranty
information contact OptiPure customer service or go to
www.optipurewater.com.
OptiPure, Mfg. by Procam Controls, Inc.
2605 Technology Dr., Bldg 300
Plano, TX 75074
p: 972.881.9797; f: 972.422.6262
www.optipurewater.com
FXTS-11spec109
Loading...