Page 1
The FX-22P
is a two housing water treatment system with
Snapshot
Foodservice Filtration Systems
drop-in 20” cartridges that reduces sediment down to 0.5
micron and reduces chlorine, taste & odor at a ow rate of
6.0 gpm for 60,000 gallons.
System Bene ts
Model: FX-22P
Part #: 160-50030
ITEM #: __________________ QTY: ________
JOB NAME/NUMBER_____________________
l
Improves the quality and consistency of cold and hot
beverages.
l
Reduces maintenance frequency and cost, and extends
equipment life.
l
Gradient-density depth ltration reduces dirt, rust, and
other debris as small as 1/2 micron to assure clean, clear
water and protect solenoids, valves and other ttings
against wear and plugging.
l
High capacity activated carbon ltration makes water taste
great and protects equipment against corrosive chlorine.
l
Reduced sediment, chlorine and taste & odor can improve
beverage ingredient ef ciency.
l
White powder coated heavy gauge steel mounting bracket
and full- ow inlet shut-off valve makes installation simple.
l
Built-in pressure gauge allows visual monitoring of
operating pressure.
l
Inlet shut-off and depressurization valves make
changing the lter quick and simple.
l
Generates less waste, only the drop-in cartridge is
replaced. No discarding of metal or plastic quick-change
lters.
l
Replacement cartridge cost per gallon is much less than
proprietary quick-change lters.
l
NSF Certi ed under Standard 42.
Application
FOUNTAIN BEVERAGES - Up to 150 bag-in-box per
month / multiple carbonators up to 6 gpm ow rate.
COMBINATION APPLICATIONS
of-use.
- Service multiple points-
Installation Tips
l
Feed-water connection to system should be COLD only.
l
Do not exceed system speci cations for temperature
and pressure.
l
Allow 3” clearance below system for lter housing
removal and cartridge replacement.
l
Detailed installation, operation & maintenance manual
is included with each system.
l
No activation procedure or ushing is required for
system to perform as speci ed.
Page 2
Model: FX-22P
Foodservice Filtration S y s t e m s
Part #: 160-50030
Specications
System
Dimensions
(Height x Width X Depth, inches)
Connection - Inlet & Outlet 1/2” NPT female
Operating Pressure Range 10-125 psi
Inlet Water Temperature Range 35o -100
Shipping Weight 24 lbs.
Performance
Chlorine, Taste and Odor
Reduction Capacity
Service Flow Rate 6.0 gpm
Sediment Reduction .5 micron
Optional Flush Valve Kit - Part #: 160-52910
25 11/16” x 12 7/16”
x 9 7/8”
(0.7 -8.6 bar)
o
o
(2o -38
C)
60,000 gals
(226,800 liters)
(22.7 lpm)
(nominal)
F
Model FX-22P is tested and certied
by NSF International against NSF/ANSI
Standard 42 for the reduction of:
Standard 42: Aesthetic Effects,
Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class 1
Dealer/Distributor Info:
Replacement Cartridge(s)
Model Part Number Qty
CTO-20 252-20120 2
It is recommended that lters be changed every six
months, when capacity is reached or when efuent
pressure or ow becomes inadequate.
This product is for commercial use only and must be
installed
and maintained according to manufacturers
guidelines.
Do not use on water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or
after the system.
Warranty
Systems have a 3 year warranty against defects in
material and workmanship. For complete warranty
information contact OptiPure customer service or go to
www.optipurewater.com.
OptiPure, Mfg. by Procam Controls, Inc.
2605 Technology Dr., Bldg 300
Plano, TX 75074
p: 972.881.9797; f: 972.422.6262
www.optipurewater.com
FX-22Pspec109
Loading...