Page 1
The FXAF-12B
is a single housing water treatment system
Snapshot
Foodservice Filtration Systems
with a drop-in 20” x 4 1/2” high capacity dual-density
sediment cartridge that takes out dirt, rust and other
particulates down to 5 micron. The system can be used as
a point-of-use sediment reduction lter; or it can be applied
prior to a primary ltration system to provide additional
pre ltration to protect against premature plugging due to
excessive dirt and sediment levels found in some water
supplies. System includes a pressure guage, inlet ball
valve and mounting bracket.
Model: FXAF-12B
Part #: 160-50340
ITEM #: __________________ QTY: ________
JOB NAME/NUMBER_____________________
System Bene ts
l
Extends the life and capacity of a down-line ltration
system.
l
High capacity, dual-density depth PolyTrix ltration
reduces dirt, rust, and other debris as small as 5 micron
to assure clean, clear water and protect solenoids, valves
and other ttings against wear and plugging.
l
Protecting down-line ltration systems against premature
plugging reduces lter change frequency and associated
cost.
l
Heavy duty powder-coated steel mounting bracket makes
installation simple.
l
Built-in inlet shut-off and depressurization valves make
changing the lter quick and simple.
l
Generates less waste, only the drop-in cartridge is
replaced. No discarding of metal or plastic quick-change
lters.
l
Built-in pressure gauge allows visual monitoring of
operating pressure.
Application
ALL EQUIPMENT APPLICATIONS - When excessive
sediment is a problem.
EXISTING FILTRATION SYSTEMS - Provides added
pre ltration to extend lter life.
Installation Tips
l
Feed-water connection to system should be COLD only.
l
Do not exceed system speci cations for temperature
and pressure.
l
Allow 3” clearance below system for lter housing
removal and cartridge replacement.
l
Detailed installation, operation & maintenance manual
is included with each system.
l
No activation procedure or ushing is required for
system to perform as speci ed.
Page 2
Model: FXAF-12B
Foodservice Filtration S y s t e m s
Part #: 160-50340
Specications
System
Dimensions
Height x Width X Depth, inches
Connection - Inlet & Outlet 3/4” NPT female
Operating Pressure Range 10-125 psi
Inlet Water Temperature Range 35o -100
Shipping Weight 18 lbs.
Performance
Chlorine, Taste and Odor
Reduction Capacity
Service Flow Rate 8.0 gpm
Sediment Reduction 5 micron
Scale & Corrosion Inhibitor N/A
24 1/2” x 6 9/16”
x 5 1/8”
(0.7 -8.6 bar)
o
F
o
(2o -38
C)
N/A
(30.3 lpm)
(nominal)
Dealer/Distributor Info:
Replacement Cartridge(s)
Model Part Number Qty
S5-20B 252-10410 1
It is recommended that lters be changed every six
months, when capacity is reached or when efuent
pressure or ow becomes inadequate.
This product is for commercial use only and must be
installed
and maintained according to manufacturers
guidelines.
Do not use on water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or
after the system.
Warranty
Systems have a 3 year warranty against defects in
material and workmanship. For complete warranty
information contact OptiPure customer service or go to
www.optipurewater.com.
OptiPure, Mfg. by Procam Controls, Inc.
2605 Technology Dr., Bldg 300
Plano, TX 75074
p: 972.881.9797; f: 972.422.6262
www.optipurewater.com
FXAF-12Bspec109
Loading...