Page 1
The QTI-3
is a three cartridge water treatment system with
®
- OptiPure’s patented scale inhibiting technology
Snapshot
Foodservice Filtration Systems
parallel-plumbed 15” Quik-Twist cartridges that reduces
sediment down to 0.5 micron and reduces chlorine, taste
& odor at a ow rate of 6.75 gpm for 67,500 gallons.
The system includes IsoNet®, OptiPure’s patented scale
inhibiting technology, which delivers consistent protection
against the precipitation and accumulation of scale
and provides a protective barrier to help guard against
corrosion.
System Bene ts
Model: QTI-3
Part #: 160-52032
ITEM #: __________________ QTY: ________
JOB NAME/NUMBER_____________________
l
helps protect equipment against scale and corrosion for
the rated capacity of the system.
l
Reduces maintenance frequency and cost, and extends
equipment life.
l
Improves equipment operating ef ciency.
l
Gradient-density depth ltration reduces dirt, rust, and
other debris as small as 1/2 micron to assure clean, clear
water and protect solenoids, valves and other ttings
against wear and plugging.
l
High capacity activated carbon ltration makes water taste
great and protects equipment against corrosive chlorine.
l
Mounting bracket and full- ow inlet shut-off valve makes
installation simple.
l
Built-in pressure gauge allows visual monitoring of
operating pressure.
l
1/4 turn QT ‘Quik-Twist’ bayonet cartridges make
changing the lters quick, easy and sanitary.
l
NSF Certi ed under Standard 42.
Application
ICE - Cubers up to 2,400 lbs, Flakers up to 4,000 lbs.
Installation Tips
l
Feed-water connection to system should be COLD only.
l
Do not exceed system speci cations for temperature
and pressure.
l
Allow 3” clearance below system for lter cartridge
removal and replacement.
l
Detailed installation, operation & maintenance manual
is included with each system.
l
No activation procedure or ushing is required for
system to perform as speci ed.
Page 2
Model: QTI-3
Foodservice Filtration S y s t e m s
Part #: 160-52032
Specications
System
Dimensions
(Height x Width X Depth, inches)
Connection - Inlet & Outlet 3/8” NFPT
Operating Pressure Range 10-125 psi
Inlet Water Temperature Range 35o -100
Shipping Weight 19 lbs.
Performance
Chlorine, Taste and Odor
Reduction Capacity
Service Flow Rate 6.75 gpm
Sediment Reduction .5 micron
Scale & Corrosion Inhibitor 300 grams
Optional Flush Valve Kit - Part #: 160-52912
21” x 14.2” x 7”
(0.7 -8.6 bar)
(2o -38
67,500 gals.
(255,478 liters)
(25.5 lpm)
(nominal)
o
F
o
C)
Model QTI-3 is tested and certied
by NSF International against NSF/ANSI
Standard 42 for the reduction of:
Standard 42: Aesthetic Effects,
Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class 1
Dealer/Distributor Info:
Replacement Cartridge(s)
Model Part Number Qty
CTOS-Q 300-05835 3
It is recommended that lters be changed every six
months, when capacity is reached or when efuent
pressure or ow becomes inadequate.
This product is for commercial use only and must be
installed
and maintained according to manufacturers
guidelines.
Do not use on water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or
after the system.
Warranty
Systems have a 3 year warranty against defects in
material and workmanship. For complete warranty
information contact OptiPure customer service or go to
www.optipurewater.com.
OptiPure, Mfg. by Procam Controls, Inc.
2605 Technology Dr., Bldg 300
Plano, TX 75074
p: 972.881.9797; f: 972.422.6262
www.optipurewater.com
QTI3spec109
Loading...