Page 1
The FXI-11
is a single housing water treatment system
®
Snapshot
Foodservice Filtration Systems
with a 10” drop-in cartridge that reduces sediment down
to 0.5 micron and reduces chlorine, taste & odor at a
ow rate of 1.5 gpm for 15,000 gallons. The system
®
includes IsoNet
,
OptiPure’s patented scale inhibiting
technology, which delivers consistent protection against
the precipitation and accumulation of scale and provides a
protective barrier to help guard against corrosion.
System Bene ts
Model: FXI-11
Part #: 160-50105
ITEM #: __________________ QTY: ________
JOB NAME/NUMBER_____________________
l
- OptiPure’s patented scale inhibiting technology
helps protect equipment against scale and corrosion for
the rated capacity of the system.
l
Reduces maintenance frequency and cost, and extends
equipment life.
l
Gradient-density depth ltration reduces dirt, rust, and
other debris as small as 1/2 micron to assure clean, clear
water and protect solenoids, valves and other ttings
against wear and plugging.
l
High capacity activated carbon ltration makes water taste
great and protects equipment against corrosive chlorine.
l
Improves equipment operating ef ciency.
l
Stainless steel mounting bracket and full- ow inlet shut-off
valve makes installation simple.
l
Built-in pressure gauge allows visual monitoring of
operating pressure.
l
Inlet shut-off and depressurization valves make changing
the lter quick and simple.
l
Generates less waste, only the drop-in cartridge is
replaced. No discarding of metal or plastic quick-change
lters.
l
Replacement cartridge cost per gallon is much less than
proprietary quick-change lters.
l
NSF Certi ed under Standard 42.
Application
ICE - Cubers up to 800 lbs. and akers up to 1,000 lbs.
COFFEE - Single to Multiple brewers up to 1.5 gpm.
STEAM & COMBI OVENS - Low to medium volume.
Installation Tips
l
Feed-water connection to system should be COLD only.
l
Do not exceed system speci cations for temperature
and pressure.
l
Allow 3” clearance below system for lter housing
removal and cartridge replacement.
l
Connect ltered water line to ice and steam production
connections only. Do not use for condenser water.
l
Detailed installation, operation & maintenance manual
is included with each system.
l
No activation procedure or ushing is required for
system to perform as speci ed.
Page 2
Model: FXI-11
Foodservice Filtration S y s t e m s
Part #: 160-50105
Specications
System
Dimensions
(Height x Width X Depth, inches
Connection - Inlet & Outlet 1/2” NPT female
Operating Pressure Range 10-125 psi
Inlet Water Temperature Range 35o -100
Shipping Weight 6 lbs.
Performance
Chlorine, Taste and Odor
Reduction Capacity
Service Flow Rate 1.5 gpm
Sediment Reduction .5 micron
Scale & Corrosion Inhibitor IsoNet (70 grams)
Optonal Flush Valve Kit - Part #: 160-52910
14 1/2” x 6 9/16”
x 5 1/8”
(0.7 -8.6 bar)
o
o
(2o -38
C)
15,000 gals
(56,700 liters)
(5.7 lpm)
(nominal)
F
Dealer/Distributor Info:
Model FXI-11 is tested and certied
by NSF International against NSF/
ANSI Standard 42 for the reduction of:
Standard 42: Aesthetic Effects,
Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class 1
Replacement Cartridge(s)
Model Part Number Qty
CTOS-10 252-20210 1
It is recommended that lters be changed every six
months, when capacity is reached or when efuent
pressure or ow becomes inadequate.
This product is for commercial use only and must be
installed
and maintained according to manufacturers
guidelines.
Do not use on water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or
after the system.
Warranty
Systems have a 3 year warranty against defects in
material and workmanship. For complete warranty
information contact OptiPure customer service or go to
www.optipurewater.com.
OptiPure, Mfg. by Procam Controls, Inc.
2605 Technology Dr., Bldg 300
Plano, TX 75074
p: 972.881.9797; f: 972.422.6262
www.optipurewater.com
FXI11spec109
Loading...