OptiPure CTO-10 User Manual
The FX-11
is a single housing water treatment system with
Snapshot
Foodservice Filtration Systems
a drop-in 10” cartridge that reduces sediment down to 0.5
micron and reduces chlorine, taste & odor at a ow rate of
1.5 gpm for 15,000 gallons.
System Bene ts
Model: FX-11
Part #: 160-50010
ITEM #: __________________ QTY: ________
JOB NAME/NUMBER_____________________
l
beverages.
l
Reduces maintenance frequency and cost, and extends
equipment life.
l
Gradient-density depth ltration reduces dirt, rust, and
other debris as small as 1/2 micron to assure clean, clear
water and protect solenoids, valves and other ttings
against wear and plugging.
l
High capacity activated carbon ltration makes water taste
great and protects equipment against corrosive chlorine.
l
Reduced sediment, chlorine and taste & odor can improve
beverage ingredient ef ciency.
l
Stainless steel mounting bracket and full- ow inlet shut-off
valve makes installation simple.
l
Built-in pressure gauge allows visual monitoring of
operating pressure.
l
Inlet shut-off and depressurization valves make
changing the lter quick and simple.
l
Generates less waste, only the drop-in cartridge is
replaced. No discarding of metal or plastic quick-change
lters.
l
Replacement cartridge cost per gallon is much less than
proprietary quick-change lters.
l
NSF Certi ed under Standard 42.
Application
FOUNTAIN BEVERAGES - Up to 50 bag-in-box per
month / single carbonator.
COFFEE & TEA -
is not a problem.
Brewer applications where water hardness
DRINKING WATER
Installation Tips
l
Feed-water connection to system should be COLD only.
l
Do not exceed system speci cations for temperature
and pressure.
l
Allow 3” clearance below system for lter housing
removal and cartridge replacement.
l
Detailed installation, operation & maintenance manual
is included with each system.
l
No activation procedure or ushing is required for
system to perform as speci ed.
Model: FX-11
Foodservice Filtration S y s t e m s
Part #: 160-50010
Specications
System
Dimensions
(Height x Width X Depth, inches
Connection - Inlet & Outlet 1/2” NPT female
Operating Pressure Range 10-125 psi
Inlet Water Temperature Range 35o -100
Shipping Weight 6 lbs.
Performance
Chlorine, Taste and Odor
Reduction Capacity
Service Flow Rate 1.5 gpm
Sediment Reduction .5 micron
14 1/2” x 6 9/16”
x 5 1/8”
(0.7 -8.6 bar)
o
F
o
(2o -38
C)
15,000 gals
(56,700 liters)
(5.7 lpm)
(nominal)
Dealer/Distributor Info:
Model FX-11 is tested and certied
by NSF International against NSF/ANSI
Standard 42 for the reduction of:
Standard 42: Aesthetic Effects, Chlorine
Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class 1
Optional Flush Valve Kit - Part #: 160-52910
Replacement Cartridge(s)
Model Part Number Qty
CTO-10 252-20110 1
It is recommended that lters be changed every six
months, when capacity is reached or when efuent
pressure or ow becomes inadequate.
This product is for commercial use only and must be
installed
and maintained according to manufacturers
guidelines.
Do not use on water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or
after the system.
Warranty
Systems have a 3 year warranty against defects in
material and workmanship. For complete warranty
information contact OptiPure customer service or go to
www.optipurewater.com.
OptiPure, Mfg. by Procam Controls, Inc.
2605 Technology Dr., Bldg 300
Plano, TX 75074
p: 972.881.9797; f: 972.422.6262
www.optipurewater.com
FX-11spec109
Loading...