OptiPure 2-2H User Manual
The CTO-CK is a replacement cartridge for the Cuno
®
Model: CTO-CK
Part #: 300-08020
Foodservice Filtration Systems
Snapshot
8000 series quick-change lter cartridges. It is a 16”
quick-change cartridge that reduces sediment down to 0.5
micron and reduces chlorine, taste & odor at a ow rate of
2.25 gpm for 22,500 gallons.
Cartridge Bene ts
REPLACEMENT CARTRIDGE
ITEM #: __________________ QTY: ________
JOB NAME/NUMBER_____________________
l
Higher capacity cartridge extends lter system life
reducing maintenance frequency.
l
Gradient-density depth ltration reduces dirt, rust, and
other debris as small as 1/2 micron to assure clean, clear
water and protect solenoids, valves and other ttings
against wear and plugging.
l
Activated carbon ltration makes water taste great and
protects equipment against corrosive chlorine.
l
Provides more than double the capacity of most 8000
series cartridges.
l
Replaces 3M® Cuno® 8000 Series sanitary quick change
cartridges.
Application
®
l
Replacement cartridge for 3M
Cuno
®
8112, 8112EL,
8112X, 8720, 8720EL cartridges.
l
Beverage Equipment.
Installation Tips
l
Insure cartridge is designed to replace the existing
cartridge.
l
Do not exceed cartridge speci cations for temperature
and pressure.
l
Allow 3” clearance below system for lter cartridge
removal and replacement.
l
No activation procedure or ushing is required for
cartridge to perform as speci ed.
l
Feed-water connection to system should be COLD
only.
®
Cuno
is a registered trademark of the 3M
®
Company.
Foodservice Filtrat ion Systems
Model: CTO-CK
Part #: 300-08020
4”
16.7”
Do not use on water that is microbiologically unsafe or of unknown quality
without adequate disinfection before or after the system.
This product is for commercial use only and must be installed
maintained according to manufacturers guidelines.
Cartridges must be changed every 12 months, when capacity is reached
or when efuent pressure or ow becomes inadequate.
Dealer/Distributor Info:
and
Specications
Cartridge
Dimensions
(Height x Width X Depth, inches
Operating Pressure Range 10-125 psi
Inlet Water Temperature Range 35o -100
Shipping Weight 5 lbs.
16.7” x 4” x 4”
(0.7 -8.6 bar)
o
o
(2o -38
C)
Performance
Chlorine, Taste and Odor
Reduction Capacity
Service Flow Rate 2.25 gpm
Sediment Reduction .5 micron
Scale & Corrosion Inhibitor N/A
22,500 gals.
(85,162 liters)
(8.5 lpm)
(nominal)
System(s) Cartridge Used In
Model Part Number Qty
DP-2C 56009-01 2
DP-3C 56010-01 2
5 55852-01 4
5C 55852-04 4
5P 55582-05 4
CFS3-EL 55736-08 3
CFS6710 55889-10 1
CFS6112 55889-08 1
CFS6812 55889-18 1
CFS6720 55889-06 1
2 55837-01 2
2C 55837-05 2
2P 55837-06 2
2-2H 55837-03 2
2C-2H 55837-09 2
2P-2H 55837-10 2
F
OptiPure, Mfg. by Procam Controls, Inc.
2605 Technology Dr., Bldg 300 Plano, TX 75074
p: 972.881.9797; f: 972.422.6262
www.optipurewater.com
Warranty
OptiPure Cartridges are warrantied against defects
in material and workmanship up to one year or when
cartridge capacity is reached. Claims of capacity or
rated service life are not applicable for mechanical
ltration. Contact OptiPure customer service or go to
the OptiPure website for a copy of the warranty.
CTO-CKspec109
Loading...