Optimus STAV-3680 User Manual

Cat. No.

Audio/Video Receiver

STAV-3680

31-3039

SFC

MODE

POWER

PHONES

STAND BY

DOLBY

PRO LOGIC

EQUAL POWER OUTPUT

STAV-3680 AUDIO/VIDEO RECEIVER

5-D

LOUDNESS

THEATER

5–CHANNEL

BASS

OSR

TREBLE

BALANCE

SPEAKERS MEMORY FM/AM ENTER

SELECTCLASSFM MONORETURN

VCR

TAPE 1

DVD/TV

LD/SAT

CD TUNER

MULTI

JOG

PHONO

DOLBY SURROUND

PRO•LOGIC

TAPE 2

MONITOR

VOLUME

MAXMIN

Owner’s Manual

Please read before using this equipment.

Introducing the Optimus STAV-3680

Your Optimus STAV-3680 Audio/Video Receiver is the perfect control center for your audio/video system. It combines 500 watts total Pro Logic Surround Sound power with five equal-power discrete amplifiers and provides connections for one tape deck, one VCR, two more tape decks or audio/video playback sources, a turntable, a CD player, and a video monitor.

Digital-Synthesized Tuner

Multi-J og Tuning

30 Memory Locations

Subwoofer Output

Tape Monitoring

Built-In Protection Circuits

Y our receiver also has special sound options.

Dolby Pro Logic ‘ Surround Sound

delivers movie theater sound for audio/video programs (especially those encoded with Dolby Surround Sound signals). sound field than ordinary playback.

Studio Effect

recording studio, adding extra richness to your music.

Dolby 3CH Logic

provides a wider

simulates the ambiance of a

5-D Theater

provides clear dynamic sound effects by sending audio signals to the rear channel to simulate stereo sounds.

Additional features include: Precisely tunes to AM and FM stations. Offers you a simple tuning method for either memorized stations or the entire

frequency range. Let you store and recall the frequencies for up to 30 AM/FM stations. Lets you easily connect an amplified subwoofer that delivers the very low fre-

quency bass sounds, bringing out the richness and depth of music plus the full impact of motion-picture special effects for sound you can actually feel.

Lets you listen to the actual recording as you record, if your tape deck has a tape-monitoring feature.

Automatically turn off the receiver to help avoid power surges or short circuit damage.

Remote Control

Lets you use a single remote control for the receiver and other compatible components connected to the receiver.

The remote control requires two AA batteries (not supplied).

Note:

We recommend you rec ord the rec eiver’s serial num ber here. The serial num ber is on the receiver’s back panel.

Serial Number:_____________________________________________

Note to the Cable TV System Installer:

This reminder is provided t o call the CATV system installer ’s attention to article 820-40 of the National E lectrical Code that provides guidelines for proper grounding and, in particular , specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

Dolby, Pro Logic, and the double-D symbol ( ) are trademarks of Dolby Laboratories Licensing Corporation.

Manufactured under license from Dolby Laboratories Licensing Corporation.

1997 Tandy Corporation.



RadioShack and Optimus are registered trademarks used by Tandy Corporation.

(

)

IMPORTANT SAFETY INSTRUCTIONS

This receiver is made and tested to meet exacting safety stand ards. It meets both UL and FCC requirements.

Warning

: To reduce the risk of fire or shock hazard, do not expose this p roduct to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

This sym bol is inte nded to al ert y ou to the presence of uninsulated dangerous voltage withi n th e sy stem’ s en cl os ure t ha t migh t be of sufficient magnitude to constitute a risk of el ectric shock. Do not open the system’s case.

This symbol is intended to inform you that important operating and maintenance in-

structions are included in the literature accompanying this system.

CAUTION

Power Lines

power li ne s.

Nonuse Periods

when you will not use it for extended periods.

Outdoor Antenna Grounding

tenna or cable system is connected to the receiver, ground the antenna or cable system so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antennadischarge unit, connection to grounding electrodes, and requirements for the grounding electrode. See the example below.

NEC -- National Electrical Code

— Locat e an outdo or an te nn a awa y fr o m

— Unplug the receiver’s power cord

— If an outside an-

Antenna Lead-In Wire

Ground Clamp

Antenna Discharge U nit

Electric Service Equipment

(NEC Section 810-20) Grounding Conductor

(NEC Section 810-21)

Grounding Clamps Power Service G rounding

Electrode System

NECArticle 250,Part H

Careful attention is devoted to quality standards in the manufacture of your receiver, and safety i a major factor in its design . However, safety is also your responsib ility.

This section lists important information that will help you properly use and enjoy your receiver an accessories. Read all the included safety and operating instructions before using your receiver. Fol low them closely, and retain them for future reference.

Heed Warnings Cleaning

cleaning. Do not use liquid or aerosol cleaners.

Attachments

turer, as they might create a hazard.

Water and Moisture

kitchen sink, or laundry tub; in a wet basement; or near a swimming pool).

Accessories

product may fal l, causing serious injury to a child or adult, and serious dam age to the product. Us only with a cart , stand, tripod, bracket, or table recommended by the manufacturer or sold with th product. Follow the manufacturer's instructions for mounting, and use a recommended mountin accessory.

Power Sources

If you are not sure of your home's power type, consult your product dealer or local power company

Polariz ation

wider than the other). This plug will fit in the power outlet only one way. This is a safety feature. I you cannot insert the plug fully into the outlet, try reversing the plug. If the plug still doesn't fit, con tact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polar ized plug. If you need an extension, use a polarized cord.

Power-Cord Protection

pinched by items placed on or against them, paying particular attention to cords at plugs, conve nience receptacles, and the point where they exit from the product.

Lightning

tended an d unus ed fo r lo ng per i od s of t im e, un plug it fro m t he wall ou t le t and di sco nn ect the an te n na or cabl e s yst e m. This w il l prev en t d am ag e to t h e p rodu ct du e t o li gh t ni ng an d p ow er- l ine s ur g es

Overloading

as this can result in a risk of fire or electric shock.

Objects and Liquids

may to uch da nger ou s volt ag e poin ts or short out pa rts that coul d resu lt in a fire or ele ctric sh ock Never spill liquid of any ki nd on the product.

Servicing

expo se yo u to dangero us vo lt age or oth er hazard s . R efe r all servic ing to qu al ifi ed servic e person nel.

Damage Requiring Service

ified s ervice personne l under the follo wing conditions:

• When the power- s upply cord or plug is damaged.

• If liquid has been spilled or objects have fallen into the product.

• If the product h as been exposed to rain or water.

• If the product does not operate normally by following the operating instructions. Adjust onl those controls that are covered by the operating instructions, as an improper adjustment o other controls may result in damage and will often require extensive work by a qualified techni cian to restore the product to normal oper ation.

• If the product h as been dropped or damaged in any way.

• When the product exhibits a distinct change in performance.

Replacement Parts

replacement parts spe c ified by the manufacturer or having the same characteristics as the origina part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

Safety Check

to perform safety checks to determine that the product is in proper operating condition.

Wall or Ceiling Mount

by the manufacturer.

Heat

— The product should be situated away from heat sources suc h as radiators, heat registers

stoves, or other products (including amplifiers) that produce heat .

— Follow all warning s on the product and in the o peratin g instructions.

— Unplug thi s produc t from the w all outl et bef ore clea ning. U se on ly a dam p cloth fo

— Do not use attachments/accessori es not recom m ended by the product manufac

— Do not use th is pr oduc t near water (for examp le, near a b atht ub, w ashbo wl

— Do not place this p roduct o n an unstable cart, stand, tripod, bracket, or table . Th

Carts

— Move the product on a cart carefully. Quick stops, excessive force, an

uneven surfaces may cause the product/cart to overturn.

Ventilation

able operation, and protect from overheating. Do not block or cover these open ings, and do not place the product on a bed, sofa, rug, or other similar surface. D not pl ace the product in a built-in bookcase or rack unless it provides proper ven tilat ion as specified by the manufacturer.

— Operate th is prod uc t usin g onl y the p ower sourc e ind icated on its marki ng la bel

— This product is equipped with a polarized AC line plug (a plug having one blad

— For added pr ot ec t io n for th is product du ring a lightning storm, o r w he n it is lef t un at

— Do not overloa d wall ou tle ts, ex tensio n cor ds, or in teg ral conv enie nce r ecepta cles

— Do not attempt to service this product yourself, as opening or removing covers ma

— Upon completion of service or repairs to this product, ask the service technicia

— Slots and openings i n t he c ab in et prov id e ve ntilati on , ensure r e li

— Route power-supply cords so they are not likely to be walked on o

— Never push objects of any kind into this product through openings, as the

— Unplug this product from the wall outlet and refer serv icing to qual

— When replacement parts are required, be sure the service technician use

— The produc t shou ld be mounte d to a wall or cei ling only as rec ommen de

Contents

reparing Yo ur Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Positioning Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Connecting Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Connecting Program Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connecting the Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using One Remote Control for More than One Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Installing the Remote Control’s Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Using the AC Power Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Connecting to AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

asic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Balance Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Loudness Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Muting the Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Using Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Tuning the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Using FM Mono . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

assette Deck/VCR Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Using the VCR/TAPE 1 and TAPE 2 Monitor Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Recording a Program Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Dubbing a Cassette Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Playing and Recording Video Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

sing Advanced Sound Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Sound Mode Adjustments (Remote Control Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

sing the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

roubleshootin g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Returning Controls to Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

are and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

he FCC Wants You to Know . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

pecifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

ndex to Features by Control Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Prepar ing Your Re ceiver

Caution: Make all the necessary connections before you plug in or turn on the receiver.

Positionin g Sp e akers

Halfway Point

Person in Listening Area

• Surround speakers generally sound best if you position them above ear level.

• To avoid interference with the picture on a nearby TV, use magnetically shielded speaker systems. This is particularly important for the center speaker since it is usually located closest to the TV .

Between Speak

a=b

Where you place your speakers (not supplied) can make a noticeable difference in your system’s sound. The guidelines in this section will help you choose the best locations. After you use your receiver for a while, you might want to try different locations for your speakers.

Bass response depends largely on speaker location. For strong bass, place the speakers in the corners of the room. If you want even stronger bass, place the speakers directly on the floor. If the bass is too strong, move the speakers slightly away from the corners of the room, or raise them 6 to 18 inches off the floor. You can buy speaker stands at your local RadioShack store.

The distance between the speakers should be about the sam e as the distance between the normal listening point and the point halfway between the speakers. If you place the speakers too close together, you reduce the stereo separation. If you place them too far apart, you reduce the bass effect and create a “hole” in the middle of the sound.

Most speakers have a tweeter dispersion angle of about 60 degrees. Ideally, your listening position should be just inside the overlap area of the tweeter dispersion. You can angle the speakers toward you for better stereo effect.

To position your speakers for surround sound, place the A or B (front) speakers at the front of your listening area, and place the surround speakers (rear) behind or to the sides of the listening point (see “Using Advanced Sound Options” on Page 21). Also, place the center speaker above, below, or behind the TV . Sound might not appear to coincide with the picture if you place the center speaker beside the TV.

Front Left Speaker

Rear Left Speaker

Center Speaker

Front

Listening

Area

Rear

Front Right Speaker

Rear Right Speaker

Preparing Your Receiver

onnecting Speakers

Follow these guidelines when you select and connect speakers.

• Be sure you properly connect all speakers.

• Do not c onnect two pairs of speakers to a single set of terminals (A or B) at the same time. When you use two pairs of speakers, conne ct one set to the Speakers A jacks and one set to the Speakers B jacks.

• Optimus and other high-quality speakers have color-coded speaker terminals (red for positive polarity and black for negative polarity). Use these color-coded terminals as a guide to help you properly connect the speakers to the receiver.

• Use 16-gauge (or larger) speaker wire for all speaker connections, and consider possible speaker locations before you decide how much speaker wire you need.

Preparing the Speaker Wires

Speaker wire consists of two conductors (individual wires) encased in insulation and is usually color-coded or marked with a ridge along one side so you can identify each conductor. Use these markings as a guide to help you properly connect the speakers to your receiver.

Follow these steps to prepare the speaker wires.

Wire Strands

Conductor

1. Cut the speaker wires to the necessary length.

2. Separate the wires about 4 inches on each end.

3. Using a wire stripper, carefully strip about end of each conductor.

4. Twist the end of each exposed wire to secure any loose strands.

Wire Strands

/4 inch of insulation from the

Setting the Impedance Selector Switch

Before connecting speakers, check your speaker system’s impedance (see

IMPED-

your speaker system’s specifications). Normally it is 8W. If it is, leave the

ANCE SELECTOR

switch set to

impedance, set the switch to

8W~16W/ SPEAKER 6Ω~16Ω/SPEAKER

R L

CAUTION:

CAUTION: SEE INSTRUCT MANUAL

. If your speaker system has 6W

SPEAKER IMPEADANCE

816

/SPEAKER

6 16 8 16

/SPEAKER

IMPEDANCE

Preparing Your Receiver

R L

FRONT SPEAKERS

PRE OUT

SUB

WOOFER

CENTER

SPEAKER

REAR

SPEAKERS

AUDIO

PRE OUT

CENTER

AUDIO

Connecting the A and B Speakers

Note:

Be sure you connect the receiver’s right and left positive (+) and negative (–) terminals to the speaker’s corresponding right and left positive (+) and negative (–) terminals.

Follow these steps to connect the right speaker to the receiver’s right

SPEAKERS A

Center Channel Power Amplifier

terminals.

Amplified Subwoofer

Right Front A Speakers Left

Right Front B Speakers Left

Center Speaker

Surround Speakers

FRONT

LeftRight

1. Lift the receiver’s

FRONT SPEAKERS A R

(+) red lever and insert the ridged or color-coded conductor’s end into the small hole. Pull back the lever to secure the conductor .

2. Lift the receiver’s

FRONT SPEAKERS A R (–

) black lever and insert the other conductor’s end into the small hole. Pull back the lever to secure the con ductor.

speaker’s positive (+) terminal.

3. Connect the ridged or color-coded conductor’s loose end to the right

4. Connect the remaining loose conductor to the right speaker’s negative (–) terminal.

Repeat Steps 1 through 4 to connect the left speaker to the receiver’s left

SPEAKERS A

Repeat this entire process to connect a second pair of speakers to the

SPEAKERS B

terminals.

FRONT

terminals.

FRONT

Preparing Your Receiver

Connecting Surround-Sound Speakers

You can connect a pair of speakers to the receiver’s for surround-sound programs. Follow the steps in “Connecting the A and B Speakers.”

REAR SPEAKERS

terminals

Connecting the Center Speaker

The center speaker gives additional ambience to surround sound. Connect the center speaker to the ing the A and B Speakers.”

CENTER SPEAKER

terminals. Follow the steps in “Connect-

Connecting Center Ch annel and Subwoofer Amplifiers

To increase th e center channel’s output power, you can connect an amplifier to the

CENTER

Y our receiver includes a line-level subwoofer output. Connecting a subwoofer to your system dramatically extends bass response for incredible richness and depth. When you listen to surround-sound programs, a subwoofer enhances your home theater experience by realistically re-creating the rumble of an earthquake, the bone-jarring percussion of a cannon, and more. To use the subwoofer output, simply connect it to an amplified subwoofer’s line-level input or to an amplifier to which you have connected a subwoofer.

RadioShack stores sell a variety of suitable subwoofers and amplifiers.

jack. Then connect the center channel speaker to the amplifier.

Preparing Your Receiver

VIDEO

Connecting Program Sources

Use shielded audio cables with phono connectors for all audio connections.

You can connect up to six external program sources to your receiver.

TO MONITOR TV

PLAY

MONITOR

SIGNAL GND

LINE

RECPLAY

REC

INPUTOUTPUT

TAPE2

OUT

OUT REC

LD/

VCR/

SAT

TAPE 1

PLAY

INOUT

DVD/

LINE

RECPLAY

L R

REC

INPUTOUTPUT

OUT PUT

CONTROL OUT

IN OUTIN IN

PHONO

L R

PLAY

VIDE

Note:

If you place the c assette deck directly above, below, or to the left of the receiver, the receiver could interfere with the cassette deck’s operation. If possible, position the cassette deck to the right of the receiver or locate it away from the receiver.

Turntable CD Player Cassette Deck Cassette Deck

Connecting a Turntable

Connect a turntable with a magnetic cartridge only. Some older turntables use a ceramic-type cartridge that does not work with this system.

Connect the turntable’s left and right cables to the receiver’s left and right

PHONO

jacks. Then connect the turntable’s ground wire to the receiver’s

GND

termi nal.

SIGNAL

Connecting Cassette Deck(s)

Y ou can connect cassette decks to the Connect the cassette deck’s output jacks to the

PLAY

jacks, and connect the cassette deck’s input jacks to the

(audio) or

TAPE 2 OUT REC

jacks.

VCR/TAPE 1

VCR/TAPE 1 IN

and the

You can connect a third cassette deck (for playback only) to the dio) jacks.

TAPE 2 MONITOR

(audio) or

TAPE 2 IN

VCR/TAPE 1 OUT

LD/SAT IN

jacks.

(au-

Connecting a CD Player

To connect a CD player to the receiver, connect the CD player’s left and right output jacks to the receiver’s

jacks.

Preparing Your Receiver

TV Monitor

LD Play er

LD Player

VCR

PHONO

TAPE2

MONITOR

VCR/

TAPE 1

VIDEO

OUT

SIGNAL GND

REC

PLAY

IN OUTIN IN

CONTROL OUT

DVD/

TO MONITOR TV

VIDEO

INOUT

LD/

SAT

OUT

L R

RECPLAY

AUDIO

REC

PLAY

INPUTOUTPUT

VCR

VIDEO

OUT

VIDEO

L R

AUDIO

OUT

VIDEO

OUT

L R

AUDIO

OUT

VIDEO

OUT

Connecting Video Sourc es

Note:

If your VCR is monaural, use a Yadapter (available at your local RadioShack store) to connect the VCR’s audio output to both the

and R audio in-

puts on the receiver.

If you connect three video sources such as VCRs, laser disc players, or DVD (digital video disc) players to your receiver, you can use the receiver to select each video source. You can also use the receiver to easily record from the video sources to the source connected to

VCR/TAPE 1

Connect phono cables from a VCR’s audio outputs to the receiver’s

LD/SAT IN

VCR/TAPE 1 OUT

Connect video cables from each video source’s video outputs to the receiver’s

VCR/TAPE 1 VIDEO IN

receiver’s You can connect a third video source to the

source’s video output to the receiver’s dio outputs to the receiver’s

(audio) jacks. Then connect phono cables from the receiver’s

(audio) jacks to the VCR’s audio input jacks.

LD/SAT VIDEO IN

VCR/TAPE 1 VIDEO OUT

DVD/TV IN

jacks. Then connect video cables from the

jack to the VCR’s video input.

DVD/TV IN

DVD/TV VIDEO IN

jacks. Connect the

jack, and the source’s au-

(audio) jacks.

VCR/TAPE 1

Connecting a Video Monito r

The monitor (or TV with baseband video input) you connect to the minal can monitor any source you connect to the receiver’s or

DVD/TV

MONITOR TV

input jacks. Connect a video cable from the receiver’s

jack to the monitor’s video input.

VIDEO OUT

VCR/TAPE 1, LD/SAT

VIDEO OUT TO

ter-

+ 22 hidden pages