Optimus STAV-3670 User Manual

Cat. No.

Audio/Video
Receiver

STAV-3670

31-3041

STAND BY

POWER

DOLBY SURROUND

P R O L O G I C

PHONES

STAV-3670 AUDIO/VIDEO RECEIVER

SFC

DOLBY

PRO LOGIC

MODE

SPEAKERS

AB

4-CHANNEL

EQUAL POWER

OUTPUT

MEMORY

FM MONO

TREBLE

VOLUME

BALANCE

L

R

TUNER

CLASS

FM/AM

LD/DVD

VCR

TAPE 1

STATION

TUNING

CD

TAPE 2

MONITOR

MIN MAX

BASS

PHONO

SUPER

BASS

OSR

Owner’s Manual

Please read before using this equipment.

Introducing the Optimus STAV-3670

Your Optimus STAV-3670 Audio/Video Receiver is the perfect control center for
your audio/video system. It combines 100 watts-per-channel of clean power
with modern styling And, it provides connections for one tape deck, one audio/
video source, one more tape deck or audio/video playback source, a turntable,
a CD player, and a video monitor.

Digital-Synthesized Tuner

30 Memory Locations

Automatic Tu ning

Super Bass

Tape Monitoring

Built-In Protection Circuits

Remote Control

Y our receiver also has special sound options.

Dolby Pro Logic‘ Surround Sound

delivers movie theater sound for audio/video programs (especially those
encoded with Dolby Surround Sound signals).
wider sound field than ordinary playback.
of a recording studio, adding extra richness to your music.

Dolby 3CH Logic

Studio Effect

provides a

simulates the ambiance

Simulated Surround

gives you a surround-sound effect even when you listen to monaural sources.
Additional features include:
Precisely tunes to AM and FM stations.
Let you store and recall the frequencies for up to 30 AM/FM stations.
Searches for the next available AM/FM station.
Creates a richer, fuller sound by enhancing the bass portion of the program.
Lets you listen to the actual recording as you record, if your tape deck has a

tape-monitoring feature.
Automatically turn off the receiver to help avoid power surges or short circuit

damage.
Lets you use a single remote control for the receiver and other compatible com-

ponents connected to the receiver.

The remote control requires two AA batteries (not supplied).

Note:

We recommend you record the receiver’s serial number here. The number is on the re­ceiver’s back panel.

Serial Number:_____________________________________________

Note to the Cable TV System Installer:

This reminder is provided to call the CATV system installer’s attention to A rticle 820-40 of the National Electrical Code t hat
provides guidelines for proper grounding and, in particular , specifies that the cable ground shall be connected to the ground­ing system of the building as close to the point of cable entry as practical.

Dolby, Pro Logic, and the double-D symbol ( ) are trademarks of Dolby Laboratories Licensing Corporation.

Manufactured under license from Dolby Laboratories Licensing Corporation.

1997 Tandy Corporation.



RadioShack and Optimus are registered trademarks used by Tandy Corporation.

All Rights Reserved.

3

IMPORTANT SAFETY INSTRUCTIONS

s

d

-

r

-

,

e

e

e

g

d

-

-

o

-

.

.

e

f

-

-

r

-

-

-

.

,

y

.

y

-

-

y

f

-

s

l

n

d

,

s

(

)

This receiver is made and tested to meet exacting
safety stand ards. It meets both UL and FCC require­ments

CAUTION

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

: TO REDUCE THE RISK OF

!

ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE­ABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.

This sym bol is inte nded to al ert y ou to the
presence of uninsulated dangerous voltage
withi n th e sy stem’ s en cl os ure t ha t migh t be
of sufficient magnitude to constitute a risk
of el ectric shock. Do not open the system’s
case.

This symbol is intended to inform you that
important operating and maintenance in-

!

structions are included in the literature ac­companying this system.

WARNING: T O REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT EX­POSE THIS APPLIANCE TO RAIN OR
MOISTURE.

CAUTION

Power Line s —L ocat e an outdo or ante nna aw ay from

power li ne s.
Nonuse Periods —Unplug the receiver’s power cord

when you will not use it for extended periods.
Outdoor Antenn a Groun ding—I f an ou tsid e an tenn a

or cable sy stem is connecte d to the receiver, ground
the antenna or cable system so as to provide some
protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA 80, provides information about proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna­discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. See the
example below.

Antenna
Lead-In
Wire

Ground Clamp

Antenna
Discharge Unit

Electric
Service
Equipment

NEC -- National Electrical Code

(NEC Section 810-20)
Grounding Conductor

(NEC Section 810-21)

Grounding Clamps

Power Service Grounding
Electrode System

NECArticle 250,Part H

Careful attention is devoted to quality standards in the manufacture of your receiver, and safety i
a major factor in its design . However, safety is also your responsib ility.

This section lists important information that will help you properly use and enjoy your receiver an
accessories. Read all the included safety and operating instructions before using your receiver. Fol
low them closely, and retain them for future reference.

Heed Warnings — Follow all warnings on the product and in the operatin g instructions.
Cleaning — Unplug t his pr oduct f rom th e wall ou tlet b efore cleani ng. Us e only a damp cloth fo

cleaning. Do not use liquid or aerosol cleaners.
Attachments — Do not use attachments/accessories not recommended by the product manufac

turer, as they might create a hazard.
Water and Moisture — Do not u se th is pr oduc t nea r wat er (f or examp le, near a b atht ub, washbo wl

kitchen sink, or laundry tub; in a wet basement; or near a swimming pool).
Accessories — Do not place this product on an unst able cart, st and, tripod, bracket, or table . Th

product may fal l, causing serious injury to a child or adult, and serious dam age to the product. Us
only with a cart , stand, tripod, bracket, or table recommended by the manufacturer or sold with th
product. Follow the manufacturer's instructions for mounting, and use a recommended mountin
accessory.

Carts — Move the product on a cart carefully. Quick stops, excessive force, an
uneven surfaces may cause the product/cart to overturn.

Ventilation — Slots an d op enings i n the cabinet provid e ve nt ilation , e ns ur e re li
able operation, and protect from overheating. Do not block or cover these open
ings, and do not place the product on a bed, sofa, rug, or other similar surface. D
not pl ace the product in a built-in bookcase or rack unless it provides proper ven
tilat ion as specified by the manufacturer.

Power Sources — Operate th is pr oduc t usin g onl y the p ower sourc e ind icat ed on i ts marki ng la bel
If you are not sure of your home's power type, consult your product dealer or local power company

Polariz ation — This produ ct is eq uipp ed wi th a po lar ize d AC li ne pl ug ( a plu g hav ing on e b lad
wider than the other). This plug will fit in the power outlet only one way. This is a safety feature. I
you cannot insert the plug fully into the outlet, try reversing the plug. If the plug still doesn't fit, con
tact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polar
ized plug. If you need an extension, use a polarized cord.

Power-Cord Protection — Route power-supply cords so they are not likely to be walked on o
pinched by items placed on or against them, paying particular attention to cords at plugs, conve
nience receptacles, and the point where they exit from the product.

Lightning — For ad de d p r ot ec t io n for th is product du ring a lightning storm, o r w he n it is left un at
tended an d unus ed fo r lo ng per i od s of t im e, un plug it fro m t he wall ou t le t and di sco nn ect the an te n
na or cabl e s yst e m. This w il l prev en t d am ag e to t h e p rodu ct du e t o li gh t ni ng an d p ow er- l ine s ur g es

Overloading — Do not ov erl oad wal l outle ts, ex tens ion cor ds, or in teg ral conv enie nce r ecept acles
as this can result in a risk of fire or electric shock.

Objects and Liquids — Never push objects of any kind into this product through openings, as the
may to uch da nger ou s volt ag e poin ts or short out pa rts that coul d resu lt in a fire or ele ctric sh ock
Never spill liquid of any ki nd on the product.

Servicing— Do not attempt to service this product yourself, as opening or removing covers ma
expo se yo u to dangero us vo lt age or oth er hazard s . R efe r all servic ing to qu al ifi ed servic e person
nel.

Damage Requiring Service — Unplug this product from the w all outlet and refer servicing to q ual
ified s ervice personne l under the follo wing conditions:

• When the power- s upply cord or plug is damaged.

• If liquid has been spilled or objects have fallen into the product.

• If the product h as been exposed to rain or water.

• If the product does not operate normally by following the operating instructions. Adjust onl
those controls that are covered by the operating instructions, as an improper adjustment o
other controls may result in damage and will often require extensive work by a qualified techni
cian to restore the product to normal oper ation.

• If the product h as been dropped or damaged in any way.

• When the product exhibits a distinct change in performance.

Replacement Parts — When repla c ement parts are required, be sure the service technician use
replacement parts spe c ified by the manufacturer or having the same characteristics as the origina
part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

Safety Check — Upon completion of service or repairs to this product, ask the service technicia
to perform safety checks to determine that the product is in proper operating condition.

Wall or Ceiling Mount — The prod uct sh ould be mount ed t o a wall or ce iling only as rec ommen de
by the manufacturer.

Heat — The product should be situ ated away from heat sources such as radiators, heat re gisters
stoves, or other products (including amplifiers) that produce heat .

Contents

reparing Yo ur Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Positioning Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Connecting Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Connecting Program Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connecting the Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using One Remote Control for More Than One Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Installing the Remote Control’s Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Using the AC Power Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Connecting to AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

asic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Tuning the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Using FM MONO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

BALANCE Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Muting the Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Using Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

assette Deck/VCR Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Using the VCR/TAPE 1 and TAPE 2 MONITOR Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Recording an Audio Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Dubbing a Cassette Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Playing and Recording Video Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

sing Advanced Sound Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Sound Mode Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

sing the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

roubleshootin g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Returning Controls to Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

are and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

he FCC Wants You to Know . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

pecifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

ndex to Features by Control Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5

Prepar in g Your Rec ei ver

.

a

e

Caution: Make all the necessary connections before you plug in or turn on the receiver.

Positioning Speakers

a

L

Halfway Point

Halfway Point

Between Speak

b

b

Normal Listening Point

Person in Listening Area

• Surround speakers generally sound
best if you position them above ear
level.

• To avoid interference with the picture
on a nearby TV, use magnetically
shielded speaker systems. This is par­ticularly important for the center
speaker since it is usually located
closest to the TV .

Between Speakers

a=b

R

a = b

Where you place your speakers (not supplied) can make a noticeable difference
in your system’s sound. The guidelines in this section will help you choose the
best locations. After you use your receiver for a while, you might want to try dif­ferent locations for your speakers.

Bass response depends largely on speaker location. For strong bass, place the
speakers in the corners of the room. If you want even stronger bass, place the
speakers directly on the floor. If the bass is too strong, move the speakers
slightly away from the corners of the room, or raise them 6 to 18 inches off the
floor. You can buy speaker stands at your local RadioShack store.

The distance between the speakers should be about the same as the distance
between the normal listening point and the point halfway between the speakers.
If you place the speakers too close together, you reduce the stereo separation.
If you place them too far apart, you reduce the bass effect and create a

hole

in

the middle of the sound.
Most speakers have a tweeter dispersion angle of about 60 degrees. Ideally,

your listening position should be just inside the overlap area of the tweeter dis­persion. You can angle the speakers toward you for better stereo effect.

To position your speakers for surround sound, place the A or B front speakers at
the front of your listening area, and place the (rear) surround speakers behind
or to the sides of the listening point (see “Using Advanced Sound Options” on
Page 20). Also, place the center speaker above, below, or behind the TV.
Sound might not appear to coincide with the picture if you place it beside the TV

TV

Front Left
Speaker

Rear Left
Speaker

Center Speaker

Listening

Front

Area

Rear

Front Right
Speaker

Rear Right
Speaker

Preparing Your Receiver

d

onnecting Speakers

Follow these guidelines when you select
and connect speakers.

• Only connect speakers that are rated
at between 8 and 16 Ohms.

• Be sure you properly connect all
speakers.

• Do not connect t wo pairs of speakers
to a single set of terminals (A or B) at
the same time. When you use two
pairs of speakers, conne ct one set to

Speakers A
B

.

and one set to

• Realistic, Optimus, and other high­quality speakers have color-coded
speaker terminals (red for positive po­larity and black for negative polarity).
Use these color-coded terminals as a
guide to help you properly connect the
speakers to the receiver.

• Use 16-gauge (or larger) speaker wire
for all speaker connections, and con­sider possible speaker locations be­fore you decide how much speaker
wire you need.

Speakers

Preparing the Speaker Wires

Speaker wire consists of two conductors (individual wires) encased in insulation
and is usually color-coded or marked with a ridge along one side so you can
identify each conductor. Use these markings as a guide to help you properly
connect the speakers to your receiver.

Follow these steps to prepare the speaker wires.

Wire Stran

Wire Strands

Conductor

Speaker Wire

Wire Strands

Conductor

Conductor

1. Cut the speaker wires to the necessary length.

2. Separate the wires about 4 inches on each end.

3. Using a wire stripper, carefully strip about
end of each conductor.

4. Twist the end of each conductor to secure any loose wire strands.

Wire Strands

3

/4 inch of insulation from the

7

Preparing Your Receiver

-

L

R

PRE OUT

SUB

WOOFER

CENTER

SPEAKER

REAR

SPEAKERS

L

R

A

B

A

B

R

L

R L

FRONT SPEAKERS

AUDIO

IN

Subwoofer

Amplifiers

Center Speaker

Right

Right

Left

Left

Front A Speakers

Front B Speakers

Right Front Speakers B Left

Right Front Speakers A Left

Center Speaker

Amplified

Subwoofer

Note:

Be sure you connect the re­ceiver’s right and left positive (+) and
negative (–) terminals to the speaker’s
corresponding right and left positive (+)
and negative (–) terminals.

Surround
Speakers

LeftRight

Connecting the A and B Speakers

Follow these steps to connect the right speaker to the receiver’s right

SPEAKERS A

1. Lift the receiver’s

2. Lift the receiver’s

terminals.

FRONT SPEAKERS A R

(+) red lever and insert the ridged
or color-coded conductor’s end into the small hole. Pull down the lever to
secure the conductor .

FRONT SPEAKERS A R (–

) black lever and insert the other
conductor’s end into the small hole. Pull down the lever to secure the con
ductor.

3. Connect the ridged or color-coded conductor’s loose end to the right
speaker’s positive (+) terminal.

FRONT

4. Connect the remaining loose conductor to the right speaker’s negative (–)
terminal.

Repeat Steps 1–4 to connect the left speaker to the receiver’s

left terminals.

A

Repeat this entire process to connect a second pair of speakers to the

SPEAKERS B

terminals.

FRONT SPEAKERS

FRONT

Preparing Your Receiver

Connecting Surround-Sound Speakers

You can connect a pair of speakers to the receiver for surround-sound pro­grams. Follow the steps in “Connecting the A and B Speakers” to connect the
speakers to the

REAR SPEAKERS

terminals.

Connecting the Center Speaker

The center speaker gives additional ambience to surround sound. Follow the
steps in “Connecting the A and B Speakers” to connect the center speaker to
the

CENTER SPEAKER

terminals.

Connecting a Subwoofer Amplifier

Y our receiver includes a line-level subwoofer output. Connecting a subwoofer to
your system dramatically extends bass response for incredible richness and
depth. When you listen to surround-sound programs, a subwoofer enhances
your home theater experience by realistically recreating the rumble of an earth­quake, the bone-jarring percussion of a cannon, and more. To use the sub­woofer output, simply connect
level input or to an amplifier to which you have connected a subwoofer.

SUBWOOFER

to an amplified subwoofer’s line-

RadioShack stores sell a variety of suitable subwoofers and amplifiers.

9

Preparing Your Receiver

SIGNAL

GND

PHONO

TAPE2

MONITOR

CD

LD/

DVD

VCR/

TAPE 1

VIDEO

CONTROL

REC

PLAY

L

R

L

R

IN OUT IN IN IN

OUT

OUT IN IN

TO MONITOR TV

VIDEO OUT

R

L

L

R

REC PLAY

LINE

REC

PLAY

INPUT OUTPUT

OUT PUT

L
R

CD

L

R

REC PLAY

LINE

REC

PLAY

INPUT OUTPUT

L

R

L

R

R

L

R

L

R

L

R

L

R

L

L

R

L

R

R

L

Connecting Program Sources

Note:

Use shielded audio cables with
phono connectors for all audio connec­tions.

You can connect up to five external program sources to your receiver.

Turntable Cassette Deck Cassette Deck CD Player

Note:

If you place the c assette deck di­rectly above, below, or to the left of the
receiver, the receiver could interfere with
the cassette deck’s operation. If possi­ble, position the cassette deck to the
right of the receiver or locate it away
from the receiver.

Connecting a Turntable

Connect a turntable with a magnetic cartridge only. Some older turntables use a
ceramic-type cartridge that does not work with this system.

Connect the turntable’s left and right cables to the receiver’s

PHONO

jacks. Then connect the turntable’s ground wire to the receiver’s

GND

terminal.

L

(left) and R (right)

Connecting a CD Player

To connect a CD player to the receiver, connect the CD player’s left and right

L

output jacks to the receiver’s

and

R CD IN

jacks.

Connecting Cassette Decks

Y ou can connect cassette decks to the
Connect the cassette deck’s output jacks to the

MONITOR PLAY

OUT

1

(audio) or

jacks, and connect the cassette deck’s input ja cks to the

TAPE 2 MONITOR REC

You can connect a third cassette deck (for playback only) to the
(audio) jacks.

VCR/TAPE 1

jacks.

and the

TAPE 2 MONITOR

VCR/TAPE 1 IN

(audio) or

LD/DVD IN

SIGNAL

jacks.

TAPE 2

VCR/TAPE

Preparing Your Receiver

OUT IN IN

VIDEO

REC

PLAY

IN OUT IN IN IN

L

R

PHONO

V

V

TAPE2

MONITOR

SIGNAL

GND

V

R

V

OUT

VIDEO

IN

L

REC PLAY

REC

INPUT OUTPUT

L

AUDIO

L

R

R

PLAY

VCR/

TAPE 1

L

R

R

LD/

DVD

L

TO MONITOR TV

CD

R

L

R

L

AUDIO

OUT

VIDEO OUT

L

OUT

R

CONTROL

v

V

VIDEO

OUT

L

R

v

V

VIDEO

IN

Note:

If your VCR is monaural, use a Y­adapter (available at your local Ra­dioShack store) to connect the VCR’s
audio output to both the

and R audio in-

L

puts on the receiver.

VCR

VCR LD/DVD Player TV Monitor

Connecting Video Sourc es

If you connect two video sources, such as VCRs, laser disc (LD) players, or dig­ital video disc (DVD) players to your receiver, you can use the receiver to select
each video source. You can also use the receiver to easily record from these
video sources to the source connected to

VCR/TAPE 1

.

Connect phono cables from each video source’s audio outputs to the receiver’s

VCR/TAPE 1

receiver’s

or

LD/DVD IN

VCR/TAPE 1 OUT

(audio) jacks. Then connect phono cables from the

(audio) jacks to the source’s audio input jacks.

Connect video cables from each video source’s video outputs to the receiver’s

VCR/TAPE 1

receiver’s

or

LD/DVD VIDEO IN

VCR/TAPE 1 VIDEO OUT

jacks. Then connect video cables from the

jack to the source’s video input.

Connecting a Video Monito r

The monitor (or TV with baseband video input) you connect to the
minal can monitor any program you connect to the receiver’s

input jacks. Connect a video cable from the receiver’s

DVD

jack to the monitor’s video input.

TOR TV

VCR/TAPE 1

VIDEO OUT TO MONI-

VIDEO OUT

or

ter-

LD/

10