How it Works
Optimus
Loading...
H-4501
Owner's Manual
2 pgs103.99 Kb0

Optimus H-4501 Owner's Manual

Warranty
For your own records,staple or attach your sales receipt to this manual. Please also write the store name/location and date purchased below. STORE NAME/LOCATION: DATE PURCHASED: _______________________________________________________
3- YEAR LIMITED WARRANTY:
Should the heater fail during the warranty period, the owner should:
● Within the first 30 days from date of purchase, the store from which you purchased your Optimus product should replace this product if it is defective in material or workmanship (provided the store has in-stock replacement).
● Within the first 12 months from date of purchase, Optimus Enterprise, Inc. will repair or replace the product if it is defective in material or workmanship providing it is returned to Optimus Enterprise, Inc. with freight prepaid, with evidence of purchase date (cash registered receipt) together with $18.00 check or money order for handling and return packaging/ shipping charges.
● In year 2 through 3 from date of purchase, Optimus Enterprise, Inc. will repair or replace the product with a refurbished heater if it is defective in material or workmanship providing it is returned to Optimus Enterprise, Inc. with freight prepaid, with evidence of purchase date (cash register receipt) together with US$25.00 check or money order for handling and return packaging/ shipping charges.
IMPORTANT: ANY REPAIRS SHOULD BE PERFORMED BY AN AUTHORIZED SERVICE REPRESENTATIVE. DO NOT ATTEMPT TO REPAIR THIS HEATER YOURSELF. DOING SO MAY VOID YOUR WARRANTY. PLEASE RETAIN THIS WARRANTY AND SALES RECEIPT TO INSURE YOUR PRODUCT WARRANTY.
IMPORTANT: RETURN INSTRUCTIONS:
Your warranty depends on your following these instructions if you are returning the unit more than 30 days after the date of purchase:
● Carefully pack the heater in the original container or a suitable container to avoid damage in
shipping.
● Seal the carton. Address an envelope as follows:
Optimus Enterprise, Inc. Customer Service Department 2201 E. Winston Rd., Unit J Anaheim, CA 92806
● Inside the envelope, enclose your name, full address with zip code, daytime phone number,
evidence of purchase date (cash register receipt) AND A CHECK OR MONEY ORDER for handling and return packaging/ shipping charges. Please also include a brief explanation of the problem you are having with the unit.
● Optimus Enterprise, Inc. recommends you insure the package (as damage in shipments is not
covered by your warranty).
● All shipping charges must be prepaid by you (as noted as above).
Instruction Manual
and Owner’s Guide
Oscillating Dish Heater with Remote Control
Model H-4501
INFORMATION HOT LINE: If, after reading this owner’s guide, you have
any question or comments, please feel free to write us or call 1-888-672-
5832. Our customer service representative will be happy to help you.
PLEASE READ AND SAVE THESE INSTRUCTIONS
IMPORTANT INSTRUCTIONS:
PLEASE READ AND SAVE THESE IMPORTANT SAFEGUARDS
Thank you for choosing an Optimus heater. To ensure the best performance from your heater, please read and save the following instructions. WHEN USING ELECTRICAL APPLIANCES, BASIC PRECUATIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSON, INCLUDING THE FOLLOWING:
●
Read all instructions before using this heater.
●
This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use grip handle when provided.
●
Keep combustible materials such as drapes, furniture, pillows, bedding, papers, clothes, and curtains at least three (3) feet (0.9m) from the front of heater and keep them at least 1 foot (0.3m) the sides and rear of the heater.
●
Extreme caution is necessary when heater is used by or near children or invalids and whenever the heater is left operating and unattended.
●
Always unplug heater when not in use.
●
Do not use any heater with a damaged cord or plug or after the heater malfunctions or has been dropped or damaged in any manner. Return heater to manufacturer for examination, electrical or mechanical adjustment, or repair. (See Warranty for information).
●
Do not use outdoors.
●
This heater is not to be used in bathrooms, laundry areas or other similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
●
Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from traffic area where it will not be tripped over.
●
To disconnect heater, turn control to OFF then remove plug from outlet.
●
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause electric shock or fire or damage the heater.
●
To prevent possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
●
A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or flammable liquids are used or stored.
●
Use this heater only as directed in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.
●
Avoid the use of an extension cord because the extension cord may overheat and cause risk of fire. However, if you must use an extension cord, the cord shall be No. 14AWG minimum size and rated not less than 1875 watts. Never use a single extension cord to operate more than one Heater.
●
If the heater will not operate: See specific instructions in Safety Feature explained in this manual.
CLEANING/ MAINTENANCE INSTRUCTIONS:
During Season Care:
●
Before cleaning, be sure to turn off and unplug the heater.
●
Carefully wipe the unit with a soft, damp cloth. Please be very cautious near the motor
and heating elements.
●
Do not immerse the heater in water.
●
Never use gasoline, benzene or thinner. This will damage the surface of the heater.
●
After cleaning, be sure to completely dry the unit with a cloth or towel.
After Season Care:
●
Store heater in a cool and dry location with power cord properly secured.
●
Please store the unit in its original carton or suitable container.
Assembly Instruction:
1. Unscrew the L shaped screw from the bottom of the extension pole.
2. Put the extension pole on to the round base and secure it by the L shaped screw.
3. Put the heater on top of the extension pole.
4. Use the screw located on the base of the heater to screw it onto the extension pole.
Operation Instruction
1. Plug the power cord into a wall outlet (110-120V AC,60Hz). You will hear a beep sound and the power light will be on.
2. Turn the unit on by pressing the ON/OFF button. When the unit is turned on the display screen will illuminate and show the room temperature and the adjustable thermostat temperature. Push the HI/LO to button to select the heater output wattage you desire. Push once to set on Low (800W) and the display will show “∫∫” as well as “LO”. Push one more time to turn the heater on High (1200W). The display will show “∫∫∫∫” as well as “HI”.
3. Push the ON/OFF button one more time to turn the unit off.
4. When the heating element is on, you may push the (+) or (–) button to select the thermostat temperature and each push will increase or decrease with 1℉ (or 1℃ if it is
displayed in Celsius). The thermostat temperature setting range is between 39℉ and 98℉ (or 4℃ and 37℃ if it display on Celsius). If you push (+) and (–) button simultaneously the
temperature will change between Celsius and Fahrenheit.
5. Every time you push the button the beep will sound once.
6. When the room temperature is about 2℉ (or 2℃ if it display on Celsius) higher or lower than the set thermostat temperature the heater will automatically turn off or on itself.
7. Timer has setting range of 0.5 hour to 8 hour. Each push will increase 0.5 hour up to 8 hour and then turn timer off.
8. Push the OSC button to turn the unit oscillation. Push one more time to turn the oscillation off. It only works when the heating element is on.
Remote Control Instructions:
1. Two AAA batteries are required (provided) before the remote can function.
2. Remote Control Hand Unit key has the same function as manual control pad except the HEAT/ OFF button which has been separated by HEAT and ON/OFF buttons.
3. Push ON/OFF button first before operating. Then adjust the desired heat level and Oscillating and Timer options you desire.
Overheat Protector
This unit equipped with TWO overheat protectors. When it senses that the output temperature is overheated, it will cut the unit off, the red Caution light will be on and the Power light will be off. Please wait for about 10 minutes until the Caution light is off and Power light turns on, then you need to unplug the power cord and plug it back on again. Push the ON/OFF and +/-button to operate the heater. This unit also equipped with a tip-over safety switch. When the unit tipped over, the heater will cut off itself.
Service Instructions
● Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void the warranty.
● If you have any questions regarding this unit’s operation or believe any repair is necessary, please call 1-888-672-5832 to speak with a Customer Service Representative.
● If you need to exchange the unit, please return it, in its original carton with a sales receipt enclosed, to the store you purchased it. If you are returning the unit more than 30 days after the date of purchase, please see the enclosed warranty.
● If you have any other question or comments, feel free to write us: Optimus Enterprise, Inc. 2201 E. Winston Rd., Unit J Anaheim, CA 92806 E-mail: OptimusEnt@aol.com
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use