LED MWG 6-720
LED MWG 6-100
LED MWG 6-600
Instructions For Use
Version 1.0.2
LED Machine and workshop light
LED MWG 6-100
LED MWG 6-600 3351052
LED MWG 6-720 3351053
3351051
®
OPTIMUM
MASCHINEN - GERMANY
Preface
Safety instructions
Designated use
Technical specification
Operation
Maintenance
Appendix
®
OPTIMUM
MASCHINEN - GERMANY
1 Preface
Dear customer, Thank you very much for purchasing this product made by OPTIMUM. You
have purchased a product which has been designed according to state of the art.
It meets the requirements of the applicable European and national guidelines.
To maintain this condition and to ensure safe operation, you must observe as user these user
manual !
Damages caused by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems.
Every person involved with the installation, operation and maintenance of this machine light
have to:
be qualilfied,
follow the instructions of this manual.
2 Safety instructions
2.1 Classification of hazards
We classify the safety warnings into different categories. The table below gives an overview of
the classification of symbols (ideogram) and the warning signs for each specific danger and its
(possible) consequences.
Symbol Alarm expression Definition / consequence
DANGER!
WARNING!
CAUTION!
ATTENTION!
INFORMATION
Impending danger that will cause serious injury or death to people.
A danger that can cause serious injury or death.
A danger or unsafe procedure that can cause personal injury or damage
to property.
Situation that could cause damage to the product, as well as other types
of damage.
No risk of injury to persons.
Practical tips and other important or useful information and notes.
No dangerous or harmful consequences for people or objects.
In case of specific dangers, we replace the pictogram with
or
general danger with a warning of optical radiation hazardous
electrical voltage,
LED MWG 6-100│LED MWG 6-600│LED MWG 6-720GB
LED6-100_LED6-600_LED6-720_GB.fm
Preface
Version 1.0.2 dated 2018-10-15Page 2 Translation of the original instructions
OPTIMUM
MASCHINEN - GERMANY
2.2 For your own safety
The luminaire has been designed in accordance with state-of-the-art standards, manufactured
with utmost care using high-quality materials, and tested. Nevertheless, its use may constitute a
risk to persons or cause material damage.
Read all enclosed instructions and information.
Please observe the warnings included in the documentation and attached to the unit.
The device must only be used in technically perfect condition, and only by persons being
aware of the risks anddangers involved in operating the device.
Keep this document available near the device.
CAUTION!
Risk of blinding caused by bright light source. Looking directly into the light source may
cause temporarily impaired vision and afterimages. This may result in irritations,
inconveniences, impairments or even accidents.
Do not look into the light source.
Position luminaire in such a way that looking directly into the light source is avoided.
WARNING!
®
Explosion hazard. Operating the luminaire in rooms subject to explosion hazards can
trigger an explosion and result in serious injuries or death.
Do not operate the luminaire in rooms subject to explosion hazards.
DANGER!
Danger due to electric current. Improper use and faulty work on the luminaire may result
in injuries and material damage.
The connection must be made by a trained skilled electrician only.
Compare the mains voltage with the nominal voltage and the frequency specified on the rat-
ing plate and makesure that they are identical.
Have maintenance and repair work carried out by a skilled electrician only.
Before performing work on the luminaire, disconnect the luminaire from the power supply.
CAUTION!
Safe mounting. A luminaire falling down can result in personal injuries and material
damage.
Use only the delivered fastening elements.
Mount the fastening elements correctly.
WARNING!
Hazard caused by unsuitable spare parts. Unsuitable spare parts can result in injuries
and material damage.
Only spare parts released by the manufacturer may be used as spare parts.
ATTENTION!
Danger due to incident laser beam. Direct or indirect incidence of a laser beam may
result in the destruction of the LED.
Use the luminaire only outside the range of action of high-performance lasers such as a cut-
ting laser.
ATTENTION!
Danger due to high ambient temperature. Exceeding the allowed ambient temperature
will shorten the useful life of the electronic components.
LED6-100_LED6-600_LED6-720_GB.fm
Safety instructions
Version 1.0.2 dated 2018-10-15 Page 3Translation of the original instructions
LED MWG 6-100│LED MWG 6-600│LED MWG 6-720 GB
Loading...