Page 1
600 3
USER MANUAL
RD
GENERATION
COLD
PRESS JUICER
Page 2
CONTENTS
WELCOME TO YOUR NEW KITCHEN ASSISTANT 1
SAFETY FIRST 1
GETTING TO KNOW YOUR 600 3RD GEN. COLD PRESS JUICER 3
ASSEMBLY METHOD NO. 1 5
ASSEMBLY METHOD NO. 2 6
USING YOUR OPTIMUM 600 3RD GEN. COLD PRESS JUICER 8
CLEANING AND MAINTENANCE 9
TROUBLESHOOTING 11
PRODUCT SPECIFICATIONS 11
WARRANTY TERMS & CONDITIONS (INTERNATIONAL) 12
CONTACT US 13
Page 3
OPTIMUM 600 3RD GENERATION // 1
WELCOME TO YOUR NEW KITCHEN ASSISTANT
Congratulations on purchasing your professional quality Optimum 600 3rd Generation Cold Press Juicer.
The 600 3rd Gen. Cold Press Juicer can be used to create your favourite juices, smoothies, and purées
using fruits and vegetables.
TO ENSURE YOUR SAFETY AND TO GET THE BEST PERFORMANCE FROM YOUR OPTIMUM
600 3RD GEN. COLD PRESS JUICER, PLEASE READ THESE INSTRUCTIONS CAREFULLY.
SAFETY FIRST
WHEN USING ELECTRICAL APPLIANCES, YOU SHOULD ALWAYS BE AWARE OF
AND FOLLOW BASIC SAFETY PRECAUTIONS INCLUDING:
1. Read and follow all instructions and warnings in this manual carefully.
2. To protect against the risk of injury due to electric shock, do not immerse the 600 3rd Gen. Cold
Press Juicer in water or any other liquid.
3. Only connect the appliance to a grounded power outlet. Always make sure the power plug is
inserted into the power outlet properly.
4. The input voltage of this appliance is between 220-240V, at 50-60Hz. Ensure the power source is
compatible with the appliance before connecting it to avoid damage.
5. This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they are supervised or have
been given instruction concerning the use of the appliance by a person responsible for their safety.
6. Do not operate the juicer if the power cord or plug are damaged, or if it malfunctions or is damaged
in any way. Return the appliance to the nearest authorised service facility for inspection or repair. Do
not attempt to repair the appliance yourself to avoid the risk of injury.
7. Do not operate the appliance with wet hands.
8. If you have any issues operating the juicer, first refer to the Troubleshooting section. If the problems
persist, contact and return the appliance to distributor for inspection or repair. Do not disassemble
the juicer yourself.
9. Unplug the power cord from the power outlet before assembling, disassembling, cleaning or putting
your hands near any moving parts of the appliance to avoid injury.
10. Ensure the detachable parts of the appliance are installed properly before use. The pulp extractor
and feeding chute should be in the ‘lock’ position to prevent leakage, spillage, or parts from
becoming loose during juicing.
11. Place the appliance on a flat, stable and level surface, away from any water or heat sources. Do not
use the appliance on carpets, towels, plastic, paper, or flammable surfaces.
Page 4
2 // OPTIMUM 600 3RD GENERATION
SAFETY FIRST
12. The appliance is equipped with an intelligent protection chip, which automatically switches o the
appliance after 20 minutes of juicing. To increase the lifespan of the appliance, always allow 20—30
minutes for the motor to cool down between uses.
13. If the appliance is overloaded or blocked during juicing, it will stop automatically after a few seconds.
You can restart the appliance after hearing the ‘beep’ sound. If the blockage still remains, unplug the
juicer and remove any food debris or pulp and restart the appliance.
14. Do not squeeze lemon juice directly into the appliance.
15. Always ensure the appliance conforms to food safety and hygiene standards by following the
cleaning and maintenance instructions in this manual.
16. The juicing screw is made of ceramic and can be broken easily. Handle the juicing screw with care to
prevent it from slipping or falling.
17. Use water to clean the appliance and all detachable parts, which come into direct contact with the
ingredients, after every use. Do not use abrasive materials, harsh cleansers or corrosive liquids (e.g.
acids, acetone, etc.) to clean the appliance.
18. Exercise extra care when handling parts of the appliance with sharp edges, emptying the cups of
their contents, and during the cleaning of the appliance.
19. Switch o and unplug the appliance during long periods of inactivity.
20. Never use anything but the tamper to push ingredients into the juicer.
21. Never use any objects (e.g. chopsticks) to remove blockages in the outlets. Follow proper cleaning
procedures instead.
22. The appliance is intended to be used in household and similar applications such as:
⊲ sta kitchen areas in shops, oces and working environments;
⊲ farm houses;
⊲ by clients in hotels, motels and other residential type environments;
⊲ bed and breakfast type environments.
FAILURE TO FOLLOW SAFETY INSTRUCTIONS AND WARNINGS COULD
RESULT IN SERIOUS INJURY. MISUSE OF YOUR COLD PRESS
JUICER MAY DAMAGE YOUR APPLIANCE AND VOID YOUR
WARRANTY.
Page 5
OPTIMUM 600 3RD GENERATION // 3
GETTING TO KNOW YOUR 600 3RD GEN. COLD PRESS JUICER
JUICING
HOPPER
JUICING
BOWL
PULP
OUTLET
JUICE
OUTLET
AUGER
COARSE
STRAINER
SPINNING BRUSH
FINE
STRAINER
TAMPER
CLEANING
BRUSH
Page 6
4 // OPTIMUM 600 3RD GENERATION
MOTOR
POWER CORD
AND PLUG
JUICE JUGS
CAUTION: The appliance will
work only when the power
plug is connected and the lid
assembly is properly put together,
as shown.
Page 7
ASSEMBLY METHOD NO. 1
OPTIMUM 600 3RD GENERATION // 5
1.
JUICING
BOWL
LOCKING
POINTS
Install the chamber onto the main body, by
aligning it to match the two locking points.
3.
AUGER
2.
STRAINER
Install the strainer inside the chamber.
4.
Install the auger into the middle of the strainer.
To install lid assembly:
A. Align the the reference mark on the lid with
the matching mark on the main housing, as
shown in the illustration, .
B. Turn the lid assembly clockwise.
CLOSEOPEN
oz
16
450 ml
350
A
12
250
8
150
4
B
CLOSEOPEN
oz
16
450 ml
350
12
250
8
150
4
Page 8
6 // OPTIMUM 600 3RD GENERATION
ALLIGNMENT
ASSEMBLY METHOD NO. 2
1.
STRAINER
SPINNING
BRUSH
Install the strainer into the spinning brush.
3.
AUGER
2.
JUICING
BOWL
To assemble the strainer into the juicing bowl,
align any of the four (4) ribs of the strainer with
the juicing bowl lock .
4.
STRAINER
LID
ASSEMBLY
JUICING
BOWL
Align the auger with the middle of the chamber,
then push it down in the proper position.
JUICING
BOWL
To install the lid assembly, place the lid onto the
chamber and then turn the assembly counterclockwise until it locks in place.
Page 9
OPTIMUM 600 3RD GENERATION // 7
PULP JUG JUICE JUG
BOTTOM VIEW
INSERTION
INSERT
5.
Install the juicing bowl onto the main body by
aligning it to match the two locking points
7.
OF JUICING BOWL
6.
PREPARING FOR USE
1. Plug the appliance to a power outlet.
2. Place the identical juice and pulp jars as
indicated in the illustration.
DIRECTION
FIRMLY
ASSEMBLING THE JUICING RUBBER MAT
When cleaning, pull out the juicing rubber mat, and put back as shown in the figure.
Page 10
8 // OPTIMUM 600 3RD GENERATION
3
USING YOUR OPTIMUM 600 3RD GEN. COLD PRESS JUICER
1.
2.
BUTTON
O
PRESS
1. Press Power button ( )
: Press the left-hand arrow to feed ingredients
into the juicer:
: Press the right -hand arrow to bring the
ingredients back up.
WARNING:
Do not operate the machine with wet hands.
2. Place clean ingredients into the chute,
and push them down using the tamper. Juice
extracting (with strainer assembly)
1. Use fresh ingredients.
2. Cut carrots into small cubes before juicing.
3. Remove the pit from persimmons, plums,
peaches and other stone fruits, before juicing.
4. To avoid damaging the strainer, do not
overload it.
3. Making smoothies with the smoothie strainer.
3.
Peel and core fruits, then pre-cut them to a size
BUTTON
O
that will fit into the chute. Place the cut
ingredients into the freezer; when they are
frozen, they can be used to make smoothies.
NOTE: Smoothies come out of the pulp outlet, not
the juice outlet.
Page 11
OPTIMUM 600 3RD GENERATION // 9
CLOSED
USING YOUR OPTIMUM 600 3RD GEN. COLD PRESS JUICER
4.
OPEN
4. Using the juice outlet
Collecting juice:
When juicing, you can open the outlet to
collect juice directly into the jar.
Mixing:
If you are juicing several ingredients at once,
leaving the outlet closed ensures better mixing
results.
NOTE: When juicing, do not exceed the max level
mark.
CLEANING AND MAINTENANCE
ALWAYS TURN OFF AND UNPLUG THE JUICER BEFORE DISASSEMBLING
AND CLEANING IT.
METHOD 1:
Press the reverse button once then, grasp the lid assembly and pull up as shown in the illustration.
METHOD 2:
Turn the lid anti-clockwise until the open mark aligns with the ●. Pull o the lid then, pull the chamber
from the main body.
Page 12
10 // OPTIMUM 600 3RD GENERATION
CLEANING AND MAINTENANCE
1.
2.
Disassemble the parts in the order shown in the
illustration.
Rinse the detachable parts with water. If the
strainer is blocked, use the cleaning brush to
remove food debris.
When cleaning, do not use steel brushes, sharp
tools, or cleaning products.
3.
If the main body becomes dirty, wipe it with a
damp cloth but do not immerse in water.
Wipe the cleaned juicer with a soft, dry cloth
before storing.
Page 13
OPTIMUM 600 3RD GENERATION // 11
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
It’s not working!
The juicer has
discoloured
parts.
The juicer
has stopped
working.
The appliance is not plugged
in.
You have not pressed the
power button.
It is normal for the juicing
screw, juice strainer, feeding
chute, juice cup and other
parts of the appliance
to be stained by certain
ingredients.
The appliance is equipped
with an intelligent protection
chip, which automatically
switches o the appliance
after 20 minutes of juicing.
The appliance is overloaded
or blocked.
Ensure the 600 3rd Gen. Cold Press Juicer is
plugged into a grounded power outlet.
Press the power button and the appropriate
arrow.
This discolouration does not compromise the
safety of using the appliance and does not
pose any harm to your health.
Wait 20-30 minutes for the motor to cool down
and start again.
Restart the appliance after hearing the ‘beep’
sound. If the blockage still remains, unplug the
juicer and remove any food debris or pulp and
restart the appliance.
PRODUCT SPECIFICATIONS
1 Product Optimum 600 3rd Generation Cold Press Juicer
2 Rated Voltage 220-240V
3 Rated Power 200W
4 Rated Frequency 50/60Hz
Only for EU countries. Do not dispose of electric appliances together with household
waste material! In observance of European Directive 2002/96/EC on waste electrical
and electronic equipment and its implantation in accordance with national law, electric
appliances that have reached the end of their life must be collected separately and
returned to an environmentally compatible recycling facility.
Page 14
12 // OPTIMUM 600 3RD GENERATION
WARRANTY TERMS & CONDITIONS (INTERNATIONAL)
This warranty as outlined below solely covers distributors of the Optimum range of products. Please
contact your distributor for full product warranty.
Eective as of 1st January 2014
1. Optimum® warranties this product against defects in materials and workmanship for a period of 2
years from the original date of purchase when used in accordance with the accompanying instruction
manual.
2. Any warranties exceeding this standard period are oered as extended terms by the selling
distributor and claimable only though that provider.
3. Defects that occur within this manufacturer’s warranty period, under normal use and care will be
repaired or replaced at our discretion only if the selling distributor is unable to do so. This is done
solely at our option with no charge for parts. This warranty does not extend to accessories included
or purchased separately. Replacements can be oered for major faults as determined by your
distributor and at their own discretion.
4. In the event that the goods requiring repair are under warranty, and this distributor is unable to
provide the repairs; the customer is responsible for any freight charges to or from Optimum® (or their
approved service provider).
5. Whilst in transit the goods are at the owner’s risk and any further damage during this transportation is
not covered under warranty.
6. Customers should ensure that the product being returned is properly packaged so as to ensure that
no damage occurs to the product during transit. To be able to process the warranty claim ensure
you have included an explanation of any problem, Optimum® will not fault-find and will only repair
described faults as covered under warranty.
7. This full warranty is void if this product has been subject to abuse, negligence, accident, alteration,
failure to follow operating instructions, or the product has been exposed to abnor-mal or extreme
conditions.
8. Cosmetic changes that do not aect performance, such as discolouration of parts of the product
in the hands of the user or the eects of the use of abrasive cleaners will not be warranted or
considered defects. The cleaning or removal of food products along with any damage caused by
allowing them to build up is not covered by this full warranty.
9. This warranty does not cover normal wear and tear of the product or parts.
10. This warranty does not cover any defect caused by an accident, misuse, abuse, improper installation
or operation, lack of reasonable care, unauthorized medication, loss of parts, tampering or attempted
repair by a person not authorized by Optimum®.
11. The warranty will not apply if damage, malfunction or failure resulting from alterations, accident,
misuse, abuse, fire, liquid spillage, maladjustment of customer controls, use on an incorrect voltage,
power surges and dips, thunderstorm activity, acts of God, voltage supply problems, tampering or
unauthorized repairs by any persons, use of defective or incompati-ble accessories, exposure to
abnormally corrosive conditions or entry by any insect, vermin or foreign object in the product.
12. This warranty does not cover damage resulting from the use of an alternate power source (e.g. solar,
inverter, generator) and the use of these devices to power your appliance is not recommended.
Page 15
OPTIMUM 600 3RD GENERATION // 13
13. You must keep your purchase receipt as proof of purchase and as proof of the date on which the
purchase was made. The purchase receipt must be presented when making a claim under this
warranty.
14. In the event the receipt of purchase is not presented, then this warranty is invalid. Consumer Law
allows us to request reasonable proof of purchase to service a warranty claim.
15. This warranty does not imply, intend to or detract from any consumer rights listed in and able to
be enforced from Regulated Consumer Law, any condition which is found to be in breach of the
consumer law, the single condition shall be void only and all other conditions remain in place.
CONTACT US
Please contact the distributor located in the country where you made your original purchase for all
Support, Servicing and Warranty.
Page 16
Optimum 600 3rd gen IM_v3
Loading...