Optika B-500iERGO, B-500TSp, B-500ERGO, B-500Tph, B-500Bph Instruction Manual
...
Version: 7
Issued: 16, 03, 2017
Model
B-500BSp
B-500TSp
B-500Bpl
B-500Tpl
B-500Bi
B-500Ti
B-500ERGO
B-500iERGO
B-500Bph
B-500Tph
B-500Biph
B-500Tiph
B-500Ti-2
B-500Ti-3
B-500Ti-5
B-500ASB
B-500Ti2F
500 Series
INSTRUCTION MANUAL
Page 2
Table of Contents
Warning
Symbols and conventions
Safety Information
Intended use
List of accessories and spare parts
Overview
Unpacking
Assembling
Using the microscope
Maintenance
Troubleshooting
Equipment disposal
Page 3
Warning
This microscope is a scientic precision instrument designed to last for many years with a minimum of maintenance. It is built to high optical and mechanical standards and to withstand daily use. We remind you that this
manual contains important information on safety and maintenance, and that it must therefore be made accessible to the instrument users. We decline any responsibility deriving from incorrect instrument use uses that does
not comply with this manual.
Symbols and conventions
The following chart is an illustrated glossary of the symbols that are used in this manual.
CAUTION
This symbol indicates a potential risk and alerts you to proceed with caution.
ELECTRICAL SHOCK
This symbol indicates a risk of electrical shock.
Safety Information
Avoiding Electrical Shock
Before plugging in the power supply, make sure that the supplying voltage of your region matches with the
operation voltage of the equipment and that the lamp switch is in off position. Users should observe all safety
regulations of the region. The equipment has acquired the CE safety label. However, users have full responsibility to use this equipment safely. Please follow the guidelines below, and read this manual in its entirety to ensure
safe operation of the unit.
Intended use
For research and teaching use only. Not intended for any animal or human therapeutic or diagnostic use.
Page 4
List of accessories and spare parts
CAT. NO. DESCRIPTION
M-680 Ergo binocular head 30°-60°
M-625 Eyepiece EWF10x/22mm
M-601 Eyepiece WF15x/16mm
M-602 Eyepiece micrometer EWF10x/22mm
M-005 26x76 mm micrometric slide. Range 1 mm, div. 0,01 mm
M-613 Polarising set ( lters only)
M-614 Rotating table for polarising set
M-618 Dark eld condenser for dry objectives
M-616 Complete phase contrast set with plan obj. 10x, 20x, 40x, 100x
M-617 Complete phase contrast set with plan IOS obj. 10x, 20x, 40x, 100x
M-616.1 Single phase contrast set 40x, plan objective
M-617.1 Single phase contrast set 40x, plan IOS objective
M-619 Photo adapter for REFLEX camera with FULL FRAME sensor
M-699 Universal adapter for OPTIKAM & DIGI cameras (only models with eyepiece adapter, 23mm)
M-620 C-Mount adapter for 1/3” sensor.
M-620.1 C-Mount adapter for 1/2” sensor.
M-515 Halogen bulb 12V/20W, with dichroic mirror
M-034 Dust cover type 5
M-975 Blue filter, 45 mm diameter
M-977 Green filter, 45 mm diameter
M-979 Yellow filter, 45 mm diameter
M-989 Frosted glass fifi lter, 45 mm diameter
ST-036 Eyecups (pair) type 2
M-173 Photo adapter for APS-C and Full Frame Reflfl ex cameras
M-114 C-Mount adapter for 1/2” sensor.
M-116 C-Mount adapter for 2/3” sensor.
M-113.1 Ring adapter, 30mm (for monocular and binocular microscopes)
M-778 C-mount adapter for 1/3”,1/2” and 2/3” sensor
M-666.500 Heating stage, with digital temperature controller B-500 series
M-666.500ph Heating stage, with digital temperature controller B-500Ph
15008 OPTIKA immersion oil 10ml
Page 5
Overview
NOSEPIECE
DIOPTRIC
ADJUSTMENT
RING
EYEPIECE
CONDENSER
CENTERING
KNOBS
APERTURE
DIAPHRAGM
FIELD DIAPHRAGM
TRANSLATION KNOB
FINE FOCUSING
KNOB
COARSE
FOCUSING
KNOB
TENSION
ADJUSTEMENT
KNOB
OBJECTIVE
STAGE
Loading...