Optics HDFX-300-TR. User Manual

Manual Contents

__________________________________________

Manual Contents

1-0

Welcome! Product Description

1-1

System Requirements for Setup

1-2

Installation

1-3

Troubleshooting, Maintenance, Technical Support, and Service

1-5

Product Specifications

1-6

Warranty Information

1-7

Certifications

1-8

Pictorials

Figure 1 – Overall Connection of HDFX-300-TR

1-1

Figure 2 – Position of the LED

1-2

Figure 3 – HDFX-300 product label

1-3

Figure 4 – Connection of optical

1-4

1-0 Manual Contents

Two (2) fibers Detachable

HDMI 2.0 Extender

User’s Manual for the

25-0150 HDFX-300-TR

Doc No. : OE-HD170529 / Ver 1.0

Welcome!

Congratulations on your purchase of the two (2) fibers HDMI 2.0 extender,
HDFX-300-TR. This manual contains information that will assist you in
installing and operating the product.

Product Description

New compact optical HDMI 2.0 extender, HDFX-300-TR enables to transmit
4K UHD (4096x2160) at 60Hz signal up to 100m (328feet), avoiding any tricks
like scaling or data compression for lessening a burden of data transmission.
It provides total data throughput 18Gbps (6Gbps per lane).

The OM3 fiber connection by two (2) LC fibers connector between transmitter
and receiver, gives clean, secure and easy installation with perfect electrical
isolation, but without electrical hazard and interference. HDFX-300-TR can be
operated by USB power by plugging the USB cable while HDFX-300-TX can
be operated by DDC 5V from pin #18 of HDMI interface(Tx side ONLY).

Figure 1 – Overall Connection of HDFX-300-TR

1-1 Welcome, Product Description

System Requirements for Setup

□ Hardware requirements

▪ You have to have a HDMI source and display. It should support

the maximum graphic resolution feature of displays to be
connected.

▪ No special requirements of memory size, CPU speed and

chipsets, if you’ve already properly installed your HDMI systems
or graphic cards.

▪ Proper initial trial of the entire platform with its application using

a short length copper cable is recommended prior to installation
with the optical link.

□ Software requirements

▪ No special restrictions, if you’ve already properly installed your

HDMI systems.

□ Power Technical Advisory

▪ Enclosed Power Adaptors and USB cables supply power to both

Transmitter and Receiver.

□ Connection Advisory

▪ It is highly recommend that HDMI source is directly

connected into HDMI display output via HDFX-300-TR
without connection to incompatible distributor, switcher
and selector.

The Shipping Group of HDFX-300-TR;

 One (1) Transmitter (Tx) and One (1) Receiver (Rx)
 Two (2) Micro USB to USB cables
 User’s Manual
 One (1) customized HDMI Cable (0.5m) - Optional

1-2 System Requirements for Setup