Opticron UTA 40940 User Manual
Specifications: (UTA fitted with 40947 connector)
Height: 76mm Diameter: 46mm Weight: 110g
(varies slightly for other connection rings)
Guarantee:
Opticron 2.5x Tele-Adapters are of a very high quality both
in their performance and construction. We guarantee some
parts in these instruments for up to 10 years under the
following conditions:
(i) In the case of defects attributable to faulty processing or
materials, we will assume responsibility for the labour
and material costs during the first 5 years after purchase.
We reserve the right to decide whether defective parts
should be repaired or replaced.
(ii) During the next 5 years we will assume responsibility for
material costs only, charging corresponding labour costs.
(iii) We will accept no liability for damage caused by
incorrect use, water penetration - unless the equipment
is specified to be waterproof, or for any repairs or
actions which have been carried out outside our firm.
(iv) Parts such as carrying straps, rubber eyecups, rubberised
coatings etc. are excluded from the guarantee.
This guarantee is in addition and does not affect your
statutory rights.
For more information please contact:
Optional Accessory
PO Box 370, Unit 21, Titan Court, Laporte Way, Luton,
Telephone: 01582 726522 Facsimile: 01582 723559
Bedfordshire, LU4 8YR UK
Email: sales@opticron.co.uk
40940 2.5x UTA
for Binocular, Monocular &
Telescope Eyepieces
40940 2.5x Tele-Adapter
The Opticron Universal Tele-Adapter enables you to
increase the magnification of your Opticron binocular or
telescope+eyepiece combination by a factor of 2.5x.
Easily fitted to a binocular, the UTA converts one half of
the instrument into a higher powered long eyerelief
monocular. The UTA also connects to Opticron SDL,
HDF and HR eyepieces.
Designed with a ‘B’ specification eyepiece for use with
or without spectacles and using a twist type retractable
eyecup assembly, the UTA can be used with a wide
range of binoculars with different eyepiece diameters as
it is supplied as two separate components:
(i) 2.5x adapter complete with lens assembly
(ii) connection ring to push fit over eyepiece
To connect simply screw parts (i) and (ii) together and
push over chosen eyepiece. Pull off to remove.
© Opticron October 2012. Specifications subject to change without prior notice
HDF T 40858
HDF T 40810
HR2 40933
coded as 30442)
DBA Mono
BGA Mono
eyepieces
Telescope
to Opticron
Binoculars,
Monoculars &
to fit 40940 UTA
Observation
Savanna WP
T3 Trailfinder
HDF T 40809
HR2 40930
HR2 40931
40947
(40940+40947
DBA Oasis
BGA Classic
Oregon LE WP
Imagic TGA WP
Mono 8x30
Mono 8x32LE
Verano BGA HD
ED-X
Explorer WA
Traveller BGA Mg
IS 40916S
IS 40918S
(Fixed mag)
40946
33.3
HDF 40860
HDF 40861
40949
52.5~51.26
SDL 40936
40940 2.5x Tele-Adapter - connectivity within the Opticron range
Code
Int dia. (mm)
Connection rings
40941
42.5~41.3
Aurora BGA
40942
42~41.3
C/Man BGA HD
40943
44.3
Imagic BGA SE
4094440HR WP
40945
34.6
SR.GA
40948
50~49.5
HDF T 40862
Loading...