Opticron UTA 30442 User Manual

Specifications:

Height: 76mm Dia: 46mm Weight: 110g

Guarantee:

Opticron 2.5x Tele-Adapters are of a very high quality both
in their performance and construction. We guarantee some
parts in these instruments for up to 10 years under the
following conditions:
(i) In the case of defects attributable to faulty processing or

materials, we will assume responsibility for the labour
and material costs during the first 5 years after purchase.
We reserve the right to decide whether defective parts
should be repaired or replaced.

(ii) During the next 5 years we will assume responsibility for

material costs only, charging corresponding labour costs.

(iii) We will accept no liability for damage caused by

incorrect use, water penetration - unless the equipment
is specified to be waterproof, or for any repairs or
actions which have been carried out outside our firm.

(iv) Parts such as carrying straps, rubber eyecups, rubberised

coatings etc. are excluded from the guarantee.

This guarantee is in addition and does not affect your
statutory rights.

For more information

please contact:

Optional Accessory

PO Box 370, Unit 21, Titan Court, Laporte Way, Luton,

Telephone: [phone] Facsimile: 01582 723559

Bedfordshire, LU4 8YR UK

E-mail: [e-mail]

30442 2.5x UTA

for DBA & BGA Monoculars

PUSH FIT TYPE

30442 2.5x Tele-Adapter [dedicated conversion]

40947

2.5x

BGA 8X42

Field 6.4˚

NITROGEN

WATERPROOF

This optional accessory enables you to convert your DBA
or BGA Monocular into a high powered long eyerelief
pocket telescope for truly portable long range observation.

8x42 20x42
10x42 25x42

Naked eye

8x Monocular

8x Monocular with 2.5x UTA
giving 20x magnification

Product Details

Kit comprises:

1. (40940) 2.5x UTA complete with lens assembly

2. (40947

P) Push fit adapter - connects to monocular

main body

3. soft case

Product Features

• ‘B’ specification eyepiece for
use with or without spectacles

• Twist type eyecup assembly

• Fully multi coated optics

• 10 year guarantee

Connecting the UTA to
your Monocular

The UTA uses a simple push fit
connection onto the main body of
the monocular and can be fitted or
removed in a matter of seconds.

Focusing

Focusing is facilitated by rotating
the centre focus barrel on the main
body monocular.

Wearing Glasses

The twist-type eyecup should be in
the extended or ‘up’ position when
using the model without glasses ­in the retracted or ‘down’ position
when wearing glasses.