Opticron Scale Loupe User Manual

Guarantee:

Opticron Scale Loupes are of a very high quality both
in their performance and construction. We guarantee
some parts in these instruments for up to 5 years
under the following conditions:

(i) In the case of defects attributable to faulty

processing or materials, we will assume
responsibility for the labour and material costs
during the first 2 years after purchase. We reserve
the right to decide whether defective parts should
be repaired or replaced.

(ii) During the next 3 years we will assume

responsibility for material costs only, charging
corresponding labour costs.

(iii) We will accept no liability for damage caused by

incorrect use, water penetration, or for any
repairs or actions which have been carried out
outside our firm.

This guarantee is in addition and does not affect your
statutory rights.

For more information please contact:

PO Box 370, Unit 21, Titan Court, Laporte Way, Luton,

Telephone: [phone] Facsimile: 01582 723559

Bedfordshire, LU4 8YR UK

E-mail: [e-mail]

© OPTICRON 2005

51207 Scale Loupe 7x

User Guide and Guarantee

The 51207 scale loupe is designed for a
number of specialist applications where
quick and accurate measurements of small
distances are required. Assembled using
fully coated optical glass lenses, the loupe
provides a bright, sharp and high contrast
image important for accurate examination.
The long eyerelief design means the
instrument can be used effectively with or
without spectacles.

Specifications:

Magnification: 7x
Lens diameter: 25mm
Lens: 4 elements, 4 lenses (fully coated)
Eyerelief: 12mm
Height: 57mm
Weight: 90g
Scale size: 33mm ø
Supplied in soft case

Instructions

(1) Place the loupe over the object to be

viewed and rotate the focusing ring until
the image is sharp.

(2) Measurements are taken by reading the

scale when the object is in focus.

Scale Pattern

Lengths can be measured in either inches
or millimetres to a maximum of 0.6” or
16mm

3

2

1

1123456782345678

(MM)

1

2

(INCH)

3