Opticon Sensors Europe PX36 Manual of Cradle

CRD9823-RU

Data Collector Cradle

Specifications Manual

All information subject to change without noti ce.

Document History

Opticon

CRD9823-RU

Specifications Manual

Model Number:
Edition:
Date:

CRD9823 RU
1
2014-01-03

Specification Number:
Original Spec Number:

Copyright 2014 Opticon. All rights reserved.

This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or
machine readable form without prior written consent of Opticon.

Limited Warranty and Disclaimers

PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT.

Serial Number

A serial number appears on all Opticon products. This official registration number is directly related to the device
purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the warranty.

Warranty

Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and
workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in
materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by
modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under
warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect,
consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon
has been informed about the possibility of such damages.

Packaging

The packing materials are recyclable. We recommend that you save all packing material to use should you need to
transport your scanner or send it for service. Damage caused by improper packaging during shipment is not covered by
the warranty.

Trademarks

Trademarks used are the property of their respective owners.
Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 5-3,

Tsukagoshi 5-chome, Warabi-shi, Saitama, Japan 335-0002. TEL [phone]; FAX [phone]

SUPPORT

USA Europe

Phone: [phone]
Email: [e-mail] Email: [e-mail]
Web: www.opticonusa.com Web: www.opticon.com

2

Opticon

CRD9823-RU

Specifications Manual

Contents

1. Abstract ................................................................................................................................. 5

2. Overview ............................................................................................................................... 5

3. Physical Features ................................................................................................................. 5

3.1. Dimensions ................................................................................................................... 5

3.2. Weight ........................................................................................................................... 5

4. Environmental Specifications .............................................................................................. 5

4.1. Operating Temperature and Humidity ............................................................................ 5

4.2. Storage Temperature and Humidity ............................................................................... 5

5. Electrical Specifications ....................................................................................................... 6

5.1. Absolute Maximum Ratings ........................................................................................... 6

5.2. Recommended Operating Conditions ............................................................................ 6

6. Interface Specifications ........................................................................................................ 7

6.1. External Interface Connector and Pin Assignment ......................................................... 7

6.1.1. DC Power Supply Connector (EIAJ Type 3) ............................................................................ 7

6.1.2. Connector for USB on PC Side (USB Type B) ......................................................................... 7

6.1.3. Connector for RS-23 2C on PC Side (Ten-electrode modular jack) ......................................... 7

6.2. Communications Interface ............................................................................................. 8

6.2.1. Baudrate Configuration using DIP switches ............................................................................. 8

6.2.2. Baud Rate Configured Using Software .................................................................................... 9

7. Cables and Connectors ...................................................................................................... 10

7.1. RS232-C Cable ........................................................................................................... 10

7.2. USB A-B Cable ............................................................................................................ 10

8. Labels .................................................................................................................................. 11

8.1. Product label ............................................................................................................... 11

8.2. Interface Label ............................................................................................................. 11

9. Packaging Specifications ................................................................................................... 12

9.1. Individual Packaging .................................................................................................... 12

9.2. Collective Packaging ................................................................................................... 13

10. Regulatory Compliance ...................................................................................................... 14

10.1. EMC ............................................................................................................................ 14

10.2. RoHS .......................................................................................................................... 14

11. Safety recommendations ................................................................................................... 15

12. Mechanical Drawings ......................................................................................................... 16

3

CRD9823-RU

Specifications Manual

Ta bl e of Figures

Figure 1: DIP switch settings ..................................................................................................... 8

Figure 2: Signal timing when software is configured .................................................................. 9

Figure 3: RS-232C cable ......................................................................................................... 10

Figure 4: USB cable ................................................................................................................ 10

Figure 5: Product label on the bottom of the cradle ................................................................. 11

Figure 6: Label on the back side of the cradle .......................................................................... 11

Figure 7: Individual packaging specification ............................................................................ 12

Figure 8: Collective packaging specification ............................................................................ 13

Figure 9: Mechanical drawing ................................................................................................. 16

Opticon

4

CRD9823-RU

Specifications Manual

1. Abstract

This manual provides specifications for the CRD9823-RU cradle designed for the Opticon OPL
(OPL97XX and OPL98XX) series data collectors. The CRD9823-RU cradle supports USB and
RS232 interfaces and can also used to charge the OPL.

2. Overview

The CRD9823-RU cradle can be used to charge the OPL series data collectors. Additionally, it
provides a way for data communication between the OPL data collector and a host computer.
The Opticon OPL data collectors all have an IrDA communication interface and this cradle acts
as a bridge between the USB/RS232 interface available on every computer and the IrDA
interface in the OPL data collector.

The CRD9823-RU communicates with the OPL data collectors via inf rared da ta
communication (IrDA1.2, low-power) and can communicate with a host computer via either
USB (USB 2.0, CDC class virtual c omm. port) or RS232C.

Opticon

The CRD9823-RU has three status LED’s, a red LED that indicates that the power is switched
on, a green LED that blinks when the cradle receives data via IrDA and a yellow LED that
blinks when data is received via USB or RS232.

The baud rate for RS232 & IrDA can be configured via special software on the host computer
but it can also be configured via a block of switches that are accessible via the bottom of the
cradle. Supported baud rates are 1200, 2400, 4800, and 9600 bps, 19.2kbps, 38.4kbps,

57.6kbps and 115.2 kbps.

3. Physical Features

3.1. Dimensions

W 98.5 x D 71.5 x H 67.0 mm

3.2. Weight

80 g

4. Environmental Specifications

4.1. Operating Temperature and Humidity

Temperature: 0 to 40° C (32 to 104° F)
Humidity: 30 to 80%

4.2. Storage Temperature and Humidity

Temperature: -20 to 60° C (-4 to 140° F)
Humidity: 30 to 90%

5