Opticon Sensors Europe PE292 Users Manual
PE-292
Electronic Shelf Label
The PE-292 is an e-paper based electronic shelf label with a
color LEDs.
V0
PE-292
V0
scrPEn size of 2.9”. It has a build-in NFC reader plus several 3-
1
PE-292
V0
The information in this document is subject to change without notice.
Document History
Model Number: PE-292 Original release date 21-12-2017
Revision: V0 Date 21-12-2017
2017 Copyright Opticon. All rights reserved.
This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted
to any electronic or machine readable form without prior written consent of Opticon.
Limited Warranty and Disclaimers
Please read this manual carefully before installing or using the product.
Serial Number
A serial number appears on all Opticon products. This official registration number is directly related to
the device purchased. Do not remove the serial number from your Opticon device. Removing the
serial number voids the warranty.
Warranty
Unless otherwise agrPEd in a written contract, all Opticon products are warranted against defects in
materials and workmanship for two years after purchase excluding batteries. Opticon will repair or, at
its option, replace products that are defective in materials or workmanship with proper use during the
warranty period. Opticon is not liable for damages caused by modifications made by a customer. In
such cases, standard repair charges will apply. If a product is returned under warranty and no defect is
found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect,
consequential or incidental damages arising out of use or inability to use both the hardware and
software, even if Opticon has bPEn informed about the possibility of such damages.
Packaging
The packing materials are recyclable. We recommend that you save all packing material to use should
you nPEd to transport your data collector or send it for service. Damage caused by improper
packaging during shipment is not covered by the warranty.
Trademarks
Trademarks used are the property of their respective owners.
Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of Optoelectronics Co.,
Ltd., 12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183;
FAX +81-(0) 48-446-1184
SUPPORT
USA Europe
Phone: 800-636-0090
Email: support@opticonusa.com Email: support@opticon.com
Web: www.opticonusa.com Web: www.opticon.com
2
V0
21-12-2017
- - Preliminary Version
Revision History
Product Name : PE-292
Edition Date Page Section Description of Changes
PE-292
V0
3
PE-292
V0
Contents
1 Abstract ............................................................................................................................ 6
2 Overview .......................................................................................................................... 6
3 Physical Features ............................................................................................................ 6
3.1 Dimensions .............................................................................................................................. 6
3.2 Weight ...................................................................................................................................... 7
4 Environmental Specifications ........................................................................................ 7
4.1 Operating Temperature and Humidity ..................................................................................... 7
4.2 Storage Temperature and Humidity ........................................................................................ 7
4.3 Humidity ................................................................................................................................... 7
4.4 Static Electricity ....................................................................................................................... 7
4.5 Electrical Noise ........................................................................................................................ 7
4.6 Vibration Strength .................................................................................................................... 7
4.7 Drop Impact Strength .............................................................................................................. 7
5 Controls ........................................................................................................................... 8
6 Electrical Specifications ................................................................................................. 9
6.1 Electrical Characteristics ......................................................................................................... 9
7 Radio Specifications ....................................................................................................... 9
7.1 Protocol .................................................................................................................................... 9
7.1.1 The physical layer ................................................................................................................ 9
7.1.2 The medium access control layer ...................................................................................... 10
7.2 Security .................................................................................................................................. 10
8 Labeling ......................................................................................................................... 11
8.1 Product Label ......................................................................................................................... 11
8.2 Shipment Box Labels ............................................................................................................. 12
9 Packaging Specifications ............................................................................................. 13
9.1 Individual Packaging Specification ........................................................................................ 13
9.2 Collective Packaging Specification ........................................................................................ 13
10 Regulatory Compliance ................................................................................................ 15
10.1 Product Safety ....................................................................................................................... 15
10.2 EMC ....................................................................................................................................... 15
10.3 WPEE .................................................................................................................................... 16
10.4 RoHS ..................................................................................................................................... 16
11 Safety ............................................................................................................................. 17
11.1 Shock ..................................................................................................................................... 17
11.2 Temperature Conditions ........................................................................................................ 17
11.3 Foreign Materials ................................................................................................................... 17
11.4 Other ...................................................................................................................................... 17
12 Mechanical Drawing ...................................................................................................... 18
4
PE-292
V0
Table of Figures
Figure 1: Dimensions ............................................................................................................................... 6
Figure 2: Product Label ......................................................................................................................... 11
Figure 3: Product Label dimensions ...................................................................................................... 11
Figure 4: Shipment box label ................................................................................................................. 12
Figure 5: Individual packaging ............................................................................................................... 13
Figure 6: collective packaging ............................................................................................................... 13
Figure 7: collective shipment packaging ............................................................................................... 14
Figure 8: Mechanical drawing................................................................................................................ 18
5
PE-292
1 Abstract
This manual provides specifications for the PE-292 RFID reader & Electronic Shelf Label (hereafter
referred to as “ESL”).
2 Overview
The PE-292 is an e-paper based Electronics Shelf Label with a 2.4GHz radio for data communication
that also features an active RFID reader and 3-color LED’s, externally powered via a rail system.
This product uses Direct Sequence Spread Spectrum RF technology that allows for ultra-low power
consumption combined with a reduced sensitivity to background noise. That means less interference
by other radios that operate in the 2.4GHz band. The radio protocol that is used is based on the IEEE
802.15.4 standard that specifies the physical layer and media access control for low-rate wireless
personal area networks. The RFID reader in this product supports all the major RFID protocols, like
Mifare, Mifare classic, DESFire and many others.
A development kit is available that consists out of a base station, several ESL tags, a powered rail
complete with PC software that allows people to quickly test the system and makes it easier to
integrate this ESL system into an existing back office system.
V0
3 Physical Features
3.1 Dimensions
W 92.3 mm x H 42.2 mm x D 11.3 mm
When mounted on a dedicated power rail (available as separate item), the thickness is 12.1mm.
Figure 1: Dimensions
6
Loading...