Opticon Sensors Europe OPL9815 User Manual
Data Collector with GPS & Bluetooth
The OPL 9815 is a laser data collector featuring GPS
(Global Positioning System) feature, Bluetooth 2.1
communication and time stamp functionality.
Specifications Manual
OPL 9815
OPL 9815
Model Number:
OPL 9815
Specification Number:
Edition:
1
Original Spec Number:
Date:
2012-02-18
SUPPORT
USA
Europe
Phone: 800-636-0090
Email: support@opticonusa.com
Email: support@opticon.com
Web: www.opticonusa.com
Web: www.opticon.com
Specifications Manual
All information subject to change without notice.
Document History
Copyright 2012 Opticon. All rights reserved.
This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any
electronic or machine readable form without prior written consent of Opticon.
Limited Warranty and Disclaimers
PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE
PRODUCT.
Opticon
Serial Number
A serial number appears on all Opticon products. This official registration number is directly related to the device
purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the
warranty.
Warranty
Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and
workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in
materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by
modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under
warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect,
consequential or incidental damages arising out of use or inability to use both the hardware and software, even if
Opticon has been informed about the possibility of such damages.
Packaging
The packing materials are recyclable. We recommend that you save all packing material to use should you need to
transport your data collector or send it for service. Damage caused by improper packaging during shipment is not
covered by the warranty.
Trademarks
Trademarks used are the property of their respective owners.
Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 12-
17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184
2
Opticon
OPL 9815
Specifications Manual
Contents
1. Abstract ..................................................................................................................................... 5
2. Overview ................................................................................................................................... 5
3. Physical Features ..................................................................................................................... 5
3.1. Dimensions ....................................................................................................................... 5
3.2. Weight ............................................................................................................................... 5
3.3. Color ................................................................................................................................. 5
4. Environmental Specifications .................................................................................................. 6
4.1. Operating Temperature and Humidity ................................................................................ 6
4.2. Storage Temperature and Humidity ................................................................................... 6
4.3. IP (dust/water) rating ......................................................................................................... 6
4.4. Drop .................................................................................................................................. 6
4.5. Ambient Light Immunity ..................................................................................................... 6
4.6. Supported symbologies: .................................................................................................... 7
5. Controls ..................................................................................................................................... 8
6. Electrical Specifications ........................................................................................................... 8
6.1. Main Battery ...................................................................................................................... 8
6.2. Battery Operating Time and Charging Time (TBD) ............................................................ 8
7. Optical Specifications .............................................................................................................. 9
7.1. Laser Scan Specifications ................................................................................................. 9
8. Technical Specifications .......................................................................................................... 9
8.1. Print Contrast Signal (PCS) ............................................................................................... 9
8.2. Minimum Resolution .......................................................................................................... 9
8.3. Scan Area and Resolution ............................................................................................... 10
8.4. Pitch, Skew, and Tilt ........................................................................................................ 11
8.5. Curvature ........................................................................................................................ 14
9. Interface Specifications .......................................................................................................... 14
9.1. Bluetooth ......................................................................................................................... 14
9.2. Infrared Transmission (IrDA) ........................................................................................... 15
9.3. GPS ................................................................................................................................ 15
10. Serial Number ......................................................................................................................... 16
10.1.1. Detailed drawing ...................................................................................................................... 17
10.1.2. Serial number ........................................................................................................................... 17
10.1.3. Manufacturing date .................................................................................................................. 18
10.2. White box label ................................ ................................................................ ................ 18
11. Packaging Specifications ....................................................................................................... 19
3
Opticon
OPL 9815
Specifications Manual
11.1. Individual Packaging Specification (TBD) ........................................................................ 19
11.2. Accessory Specification (TBD) ........................................................................................ 20
11.3. Collective Packaging Specification .................................................................................. 20
12. Durability ................................................................................................................................. 21
12.1. Drop Test (without packaging) ................................ ......................................................... 21
12.2. Dust and Drip Proof ......................................................................................................... 21
13. Reliability ................................................................................................................................ 21
14. Regulatory Compliance .......................................................................................................... 21
14.1. Laser Safety .................................................................................................................... 21
14.2. Certifications.................................................................................................................... 22
14.3. RoHS .............................................................................................................................. 22
14.4. State of California: Perchlorate Best Management Practices ........................................... 22
15. Safety precautions .................................................................................................................. 23
15.1. Shock .............................................................................................................................. 23
15.2. Temperature Conditions .................................................................................................. 23
15.3. Foreign Materials ............................................................................................................. 23
15.4. Other ............................................................................................................................... 23
16. Mechanical Drawing ................................................................................................ ............... 24
17. Detailed view ........................................................................................................................... 25
Table of Figures
Figure 1: Ambient Light Immunity ................................................................................................ 6
Figure 2: Depth of field ............................................................................................................. 10
Figure 3: Pitch .......................................................................................................................... 11
Figure 4: Skew and dead zone ................................................................................................. 12
Figure 5: Tilt angle .................................................................................................................... 13
Figure 6: Curvature ................................................................................................................... 14
Figure 7: Name plate and serial number ...................................... Error! Bookmark not defined.
Figure 8: Individual packaging .................................................................................................. 19
Figure 9: Collective packaging .................................................................................................. 20
Figure 10: Drop test .................................................................................................................. 21
Figure 11: Mechanical drawing ................................................................................................. 24
4
Specifications Manual
1. Abstract
This manual provides specifications for the OPL 9815 barcode data collector.
2. Overview
The OPL 9815 is a barcode data collector that contains a compact laser module.
This data collector offers efficient scanning performance that is suitable for various business
environments and is able to store scanned data and data configured via keyboard input.
Bluetooth ver 2.1 is one of the communication options for this device allowing it to wirelessly
connect to many peripherals like printers, smart phones and tablets. The supported profiles
are SPP (Serial port profiles) and HID (keyboard emulation).
Infra-red is another communication option of the OPL 9815. Stored data can be sent out via
an IrDA Ver.1.2-compliant infra-red transceiver. For easy connection to a computer, Opticon
sells several cradles that can be used to receive the infra-red transmission and convert that
to a standard RS232 or USB signal that can be connected to any computer. On top of the
communication features that the cradles can offer, they can also be used to charge the
battery inside the data collector.
Opticon
OPL 9815
The OPL 9815 also has a GPS (Global Positioning System) feature and clock function.
Those extra features of the OPL 9815 make it possible to add location data and a time
stamp to scanned barcode data. Additional to the OPL 9813, this model features a backlit
display and a keyboard with 18 keys.
The OPL 9815 can use a variety of cradles:
CRD 9723 single-bay cradle (1 x charging, 1 x communication)
CRD 9723 multi-bay cradle (5 x charging, 1 x communication)
CRD 9723 multi-bay cradle (5 x charging, 5 x communication)
CRD 9722 single-bay cradle (1 x charging, no communication)
CRD 9726 Single-bay cradle with land-line modem
CRD 9727 Single-bay cradle with GSM modem
Use a dedicated C-language-based development tool to develop applications for the OPL
9815.
3. Physical Features
3.1. Dimensions
W 44.0 mm x D 22.0 mm x H 140.0 mm
3.2. Weight
115 g (max.), excluding the lithium-ion battery
3.3. Color
Black
5
4. Environmental Specifications
Incandescent light
3,000 lx
Fluorescent light
3,000 lx
Sunlight
50,000 lx
Figure 1: Ambient Light Immunity
4.1. Operating Temperature and Humidity
Temperature: 0 to 40° C
Humidity: 20 to 85%
4.2. Storage Temperature and Humidity
Temperature: -20 to 60° C
Humidity: 20 to 90%
4.3. IP (dust/water) rating
IP 54
4.4. Drop
1.5m on concrete
Opticon
OPL 9815
Specifications Manual
4.5. Ambient Light Immunity
Decoding performance is guaranteed when the range of illumination on a barcode
surface is between zero and the following values:
6
Specifications Manual
PCS:
0.9
Resolution:
0.25 mm
Symbology:
8-digit Code 39
Quiet Zone:
10 mm
N/W Ratio:
1:2.5
Linear (1D)
Postal
2D
JAN/UPC/EAN, incl. add-on
Chinese Post
Composite Codes
Codabar/NW-7
Korean Postal Authority Code
MicroPDF417*
Code 11
PDF417*
Code 39
Code 93
Code 128
GS1-128 (EAN-128)
GS1 Databar (RSS)
IATA
Industrial 2of5
Interleaved 2of5
ISBN-ISSN
Matrix 2of5
MSI/Plessey
S-Code
Telepen
Tri-Optic
UK/Plessey
Conditions
Barcode Sample: OPTOELECTRONICS Test Sample
Direct light or specular reflection light from a source should be prevented from
entering the acceptance area.
Note: α, β and γ respectively represent pitch, skew and tilt. Please see section 8 for
how these values are defined.
4.6. Supported symbologies:
Opticon
OPL 9815
* Requires use of an external library.
7
5. Controls
Item
Specifications
Remarks
Controls
MPU
32-bit microprocessor
Built-in ROM
512 KB
Built-in RAM
64 KB
External
memory
Flash ROM
1 MB
SRAM
512 KB
Display
LCD
Monochrome
Dots
112 x 64
Backlight
Yes
Scanning
indicators
Tricolor LED and buzzer
Keyboard
Keys
Shift, backspace, Clear, dot, Enter, up, down
and trigger.
0~9 numeric keys
Scanning
Laser wavelength/
output
650 nm / 1mW or less
Scanning
frequency
100 times/s
Clock
Real time clock
Supports year, month, date, hour, minute and
seconds (leap year supported)
Buzzer
Loudness
75 dBA or higher
Parameter
Specifications
Notes
Backup battery
3 mAh manganese dioxide battery
Current
consumption
1 mA or less (on standby)
160 mA or less (when operating)
GPS, Bluetooth and backlight on.
Usable time
50 hours or more (not using GPS)
10 hours or more (using GPS)
1 scan/5s
Data hold time
72 hours or more
After main battery discharged
Opticon
OPL 9815
Specifications Manual
6. Electrical Specifications
6.1. Main Battery
The main battery is a lithium-ion secondary battery.
Nominal capacity: 1000 mAh
Battery charging time: Approximately 3 hours
6.2. Battery Operating Time and Charging Time (TBD)
Note: Battery life may be shorter than specified above when the quality of the battery
pack is degraded.
8
Loading...