Opticon Sensors Europe OPL9813 User Manual
Data Collector with GPS & Bluetooth
Preliminary
OPL9813
The OPL 9813 is a laser data collector featuring GPS
(Global Positioning System) feature, Bluetooth 2.1
communication and time stamp functionality.
Specifications Manual
All information subject to change without notice.
Document History
Opticon
OPL 9813
Preliminary Specifications Manual
Model Number:
Edition:
Date:
OPL 9813
2
2012-02-23
Specification Number:
Original Spec Number:
Copyright 2012 Opticon. All rights reserved.
This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any
electronic or machine readable form without prior written consent of Opticon.
Limited Warranty and Disclaimers
PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE
PRODUCT.
Serial Number
A serial number appears on all Opticon products. This official registration number is directly related to the device
purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the
warranty.
Warranty
Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and
workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in
materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by
modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under
warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect,
consequential or incidental damages arising out of use or inability to use both the hardware and software, even if
Opticon has been informed about the possibility of such damages.
Packaging
The packing materials are recyclable. We recommend that you save all packing material to use should you need to
transport your datacollector or send it for service. Damage caused by improper packaging during shipment is not
covered by the warranty.
Trademarks
Trademarks used are the property of their respective owners.
Opticon Inc. and Opticon Sensors Europe B.V. are wholly ownedsubsidiaries of OPTOELECTRONICS Co., Ltd., 12-
17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184
SUPPORT
USA Europe
Phone: 800-636-0090
Email: support@opticonusa.com Email: support@opticon.com
Web: www.opticonusa.com Web: www.opticon.com
2
Opticon
OPL 9813
Preliminary Specifications Manual
Contents
1. Abstract.....................................................................................................................................5
2. Overview ...................................................................................................................................5
3. Physical Features.....................................................................................................................6
3.1. Dimensions .......................................................................................................................6
3.2. Weight...............................................................................................................................6
3.3. Color .................................................................................................................................6
4. Environmental Specifications..................................................................................................6
4.1. Operating Temperature and Humidity................................................................................6
4.2. Storage Temperature and Humidity...................................................................................6
4.3. IP (dust/water) rating.........................................................................................................6
4.4. Drop..................................................................................................................................6
4.5. Ambient Light Immunity.....................................................................................................7
5. Controls.....................................................................................................................................8
6. Electrical Specifications...........................................................................................................8
6.1. Main Battery......................................................................................................................8
6.2. Battery Operating Time and Charging Time ......................................................................8
7. Optical Specifications..............................................................................................................9
7.1. Laser Scan Specifications .................................................................................................9
8. Technical Specifications..........................................................................................................9
8.1. Print Contrast Signal (PCS)...............................................................................................9
8.2. Minimum Resolution..........................................................................................................9
8.3. Scan Area and Resolution...............................................................................................10
8.3.1. Depth of Field...........................................................................................................................10
8.4. Pitch, Skew, and Tilt........................................................................................................11
8.4.1. Pitch Angle...............................................................................................................................11
8.4.2. Skew Angle and Dead Zone ....................................................................................................12
8.4.3. Tilt Angle..................................................................................................................................13
8.5. Curvature ........................................................................................................................14
9. Interface Specifications..........................................................................................................14
9.1. Bluetooth.........................................................................................................................14
9.2. Infrared Transmission(IrDA) ...........................................................................................14
9.3. GPS ................................................................................................................................15
10. Serial Number.........................................................................................................................16
10.1. Dimensions and location..................................................................................................16
10.2. Detailed drawing..............................................................................................................17
3
Opticon
OPL 9813
Preliminary Specifications Manual
10.3. Serial number..................................................................................................................17
10.4. Manufacturing date..........................................................................................................18
11. Packaging Specifications.......................................................................................................19
11.1. Individual Packaging Specification...................................................................................19
11.2. Accessory Specification...................................................................................................20
11.3. Collective Packaging Specification..................................................................................20
12. Durability.................................................................................................................................21
12.1. Drop Test (without packaging).........................................................................................21
12.2. Dust and Drip Proof.........................................................................................................21
13. Reliability ................................................................................................................................21
14. Regulatory Compliance..........................................................................................................21
14.1. Laser Safety....................................................................................................................21
14.2. Certifications....................................................................................................................22
14.3. RoHS ..............................................................................................................................22
14.4. State of California: Perchlorate Best Management Practices...........................................22
15. Safety.......................................................................................................................................23
15.1. Shock..............................................................................................................................23
15.2. Temperature Conditions..................................................................................................23
15.3. Foreign Materials.............................................................................................................23
15.4. Other...............................................................................................................................23
16. Mechanical Drawing...............................................................................................................24
Table of Figures
Figure 1:Ambient Light Immunity................................................................................................7
Figure 2: Depth of field .............................................................................................................10
Figure 3: Pitch .......................................................................................................................... 11
Figure 4: Skew and dead zone .................................................................................................12
Figure 5: Tilt angle....................................................................................................................13
Figure 6: Curvature...................................................................................................................14
Figure 7: Name plate and serial number...................................................................................16
Figure 8: Name plate and serial number details........................................................................17
Figure 9: Individual packaging..................................................................................................19
Figure 10: Collective packaging................................................................................................20
Figure 11: Drop test..................................................................................................................21
Figure 12: Mechanical drawing.................................................................................................24
4
Preliminary Specifications Manual
1. Abstract
This manual provides specifications for the OPL 9813 barcode data collector.
2. Overview
The OPL 9813 is a barcode data collector that contains a compact laser module.
This data collector offers efficient scanning performance that is suitable for various business
environments and is able to store scanned data and data configured via keyboard input.
Infra-red radiation communication is one of communication functions of the OPL 9813.
Stored data can be sent to the host computer by IrDA Ver.1.2-compliant infra-red radiation
communication (using a dedicated cradle).
The OPL 9813 is a laser data collector with a GPS (Global Positioning System) feature and
clock function. Those extra features of the OPL 9813 make it possible to add location data
and a time stamp to scanned barcode data.
Opticon
OPL 9813
Supported symbologies:
Linear (1D) Postal 2D
JAN/UPC/EAN, incl. add-on Chinese Post Composite Codes
Codabar/NW-7 Korean Postal Authority Code MicroPDF417*
Code 11 PDF417*
Code 39
Code 93
Code 128
GS1-128 (EAN-128)
GS1 Databar (RSS)
IATA
Industrial 2of5
Interleaved 2of5
ISBN-ISSN
Matrix 2of5
MSI/Plessey
S-Code
Telepen
Tri-Optic
UK/Plessey
* Requires use of an external library.
5
Preliminary Specifications Manual
The OPL 9813 can use a variety of cradles:
CRD 9723 single bay cradle (1 x charging, 1 x communication)
CRD 9723 multi bay cradle (5 x charging, 1 x communication)
CRD 9723 multi bay cradle (5 x charging, 5 x communication)
CRD 9722 single bay cradle (1 x charging, no communication)
CRD 9726 single bay cradle with build-in telephone modem.
CRD 9727 single bay cradle with build-in GSM modem.
C-language-based development tools are available for application development.
3. Physical Features
3.1. Dimensions
W 44.0 mm x D 22.0 mm x H 140.0 mm
Opticon
OPL 9813
3.2. Weight
115 g (max.), excluding the lithium-ion battery
3.3. Color
Black
4. Environmental Specifications
4.1. Operating Temperature and Humidity
Temperature: 0 to 40° C
Humidity: 20 to 85%
4.2. Storage Temperature and Humidity
Temperature: -20 to 60° C
Humidity: 20 to 90%
4.3. IP (dust/water) rating
IP 54
4.4. Drop
1.5m on concrete
6
Preliminary Specifications Manual
4.5. Ambient Light Immunity
Decoding performance is guaranteed when the range of illumination on a barcode
surface is between zero and the following values:
Incandescent light 3,000 lx
Fluorescent light 3,000 lx
Sunlight 50,000 lx
Opticon
OPL 9813
Figure 1: Ambient Light Immunity
Conditions
Barcode Sample: OPTOELECTRONICS Test Sample
PCS: 0.9
Resolution: 0.25 mm
Symbology: 8-digit Code 39
Quiet Zone: 10 mm
N/W Ratio: 1:2.5
Direct light or specular reflection light from a source should be prevented from
entering the acceptance area.
Note: α, β and γ respectively represent pitch, skew and tilt. Please see section 8 for
how these values are defined.
7
5. Controls
Item Specifications Remarks
Controls
External
memory
Display
Scanning
Clock Real time clock
Keyboard
Buzzer Loudness 75 dB(A) or higher
MPU 32-bit microprocessor
Built-in ROM 512 KB
Built-in RAM 64 KB
Flash ROM 512 KB (Option: Max. 4 MB)
SRAM 512 KB (Option: Max. 2 MB)
LCD None
Dots
Backlight
Scanning
indicators
Laser wavelength/
output
Scanning
frequency
Up
Trigger
Down
Tricolor LED and buzzer
650 nm / 1mW or less
100 times/s
Supports year, month, date, hour, minute and
seconds (leap year supported)
Since the OPL9813 is fully programmable, the
actual function of these keys is determined by
the installed application.
Opticon
OPL 9813
Preliminary Specifications Manual
6. Electrical Specifications
6.1. Main Battery
The main battery is a lithium-ion secondary battery.
Nominal capacity: 1000 mAh
Battery charging time: Approximately 3 hours
6.2. Battery Operating Time and Charging Time
Parameter Specifications Notes
Backup battery 3 mAh manganese dioxide battery
Current
consumption
Usable time 50 hours or more (not using GPS)
Data hold time 72 hours or more After main battery discharged
Note: Battery life may be shorter than specified above when the quality of the battery
pack is degraded.
1 mA or less (on standby)
150 mA or less (when operating) GPS & Bluetooth on.
10 hours or more (using GPS)
1 scan/5s
8
Loading...