Opticon Sensors Europe EE290 User Manual
EE-290
Electronic Shelf Label
The EE-290 is an e-paper based electronic shelf label with a screen
size of 2.9” and with 802.15.4 based wireless communication.
V-0.4
EE-290
V-0.4
1
EE-290
V-0.4
The information in this document is subject to change without notice.
Document Histor y
Model Number: EE-290 Original release date 08-01-2016
Revision: V-0.4 Date 29-02-2016
2016 Copyright Opticon. All right s reserved.
This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted
to any electronic or machine readable form without prior written consent of Opticon.
Limited Warranty and Disclaimers
PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING
OR USING THE PRODUCT.
Serial Number
A serial number appears on all Opticon products. This official registration number is directly related to
the device purchased. Do not remove the serial number from your Opticon device. Removing the
serial number voids the warranty.
Warranty
Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in
materials and workmanship for two years after purchase excluding batteries. Opticon will repair or, at
its option, replace products that are defective in materials or workmanship with proper use during the
warranty period. Opticon is not liable for damages caused by modifications made by a customer. In
such cases, standard repair charges will apply. If a product is returned under warranty and no defect is
found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect,
consequential or incidental damages arising out of use or inability to use both the hardware and
software, even if Opticon has been informed about the possibility of such damages.
Packaging
The packing materials are recyclable. We recommend that you save all packing material to use should
you need to transport your data collector or send it for service. Damage caused by improper
packaging during shipment is not covered by the warranty.
Trademarks
Trademarks used are the property of their respective owners.
Opticon Inc. and Opticon Sensors Europe B. V. are wh oll y owned subs i diar ies of
OPTOELECTRONICS Co., Ltd., 12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002.
TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184
SUPPORT
USA Europe
Phone: 800-636-0090
Email: support@opticonusa.com Email: support@opticon.com
Web: www.opticonusa.com Web: www.opticon.com
2
V0.1
2015/10/02
- - Preliminary Version
p6
p17
Section 3,
Section 12
Added dimensions drawing
Added mechanical drawing
V0.3
2016/01/08
P6
Section 3.2
Updated weight
P6
P7
Section 3.2
Section 4.4
Updated weight
Removed spec for drop resistance
Revision Histor y
Product Name : EE-290
Edition Date Page Section Description of Changes
EE-290
V-0.4
p10
V0.2 2015/10/13
V0.4 2016/02/29
p15
p15
p16
Section 7,
Section10.1,
Section10.2,
Section 11.4,
Changed Radio Frequency range
Changed product safety standards
Changed FCC statement
Added FCC required battery caution statement
3
EE-290
V-0.4
Contents
1 Abstract ........................................................................................................................ 6
2 Overview ....................................................................................................................... 6
3 Physical Features ......................................................................................................... 6
3.1 Dimensions ............................................................................................................................... 6
3.2 Weight ....................................................................................................................................... 6
4 Environmental Specifications ..................................................................................... 7
4.1 Operating Temperature and Humidity ....................................................................................... 7
4.2 Storage Temperature and Humidity .......................................................................................... 7
4.3 Static Electricity ......................................................................................................................... 7
5 8
6 Controls ........................................................................................................................ 8
7 Electrical Specifications .............................................................................................. 9
7.1 Electrical Characteristics ........................................................................................................... 9
7.2 Battery ....................................................................................................................................... 9
8 Radio Specifications .................................................................................................. 10
8.1 Protocol ................................................................................................................................... 10
8.1.1 The physical layer ............................................................................................................ 10
8.1.2 The medium access control layer .................................................................................... 10
8.2 Security ................................................................................................................................... 10
9 Labeling ...................................................................................................................... 11
9.1 Product Label .......................................................................................................................... 11
9.2 Shipment Box Labels .............................................................................................................. 12
10 Packaging Specifications .......................................................................................... 13
10.1 Individual Packaging Specification ...................................................................................... 13
10.2 Collective Packaging Specification ...................................................................................... 13
11 Regulatory Compliance ............................................................................................. 15
11.1 Product Safety ..................................................................................................................... 15
11.2 EMC ..................................................................................................................................... 15
11.3 WEEE .................................................................................................................................. 16
11.4 RoHS ................................................................................................................................... 16
12 Safety .......................................................................................................................... 17
12.1 Shock ................................................................................................................................... 17
12.2 Temperature Conditions ...................................................................................................... 17
12.3 Foreign Materials ................................................................................................................. 17
12.4 Disposal / Battery ................................................................................................................ 17
12.5 Other .................................................................................................................................... 17
13 Mechanical Drawing ................................................................................................... 18
4
EE-290
V-0.4
Table of Figures
Figure 1: Dimensions ............................................................................................................................... 6
Figure 2: Product Label ......................................................................................................................... 11
Figure 3: Product Label dimens ions ...................................................................................................... 11
Figure 4: Shipment box label ................................................................................................................. 12
Figure 5: Individual packagi ng ............................................................................................................... 13
Figure 6: collective packaging ............................................................................................................... 13
Figure 7: collective shipment packaging ............................................................................................... 14
Figure 8: Mechanical drawing................................................................................................................ 18
5
EE-290
V-0.4
1 Abstract
This manual provides specifications for the EE-290 Electronic Shelf Label (hereafter referred to as
“ESL”).
2 Overview
The EE-290 is an E-ink based ESL with a 2.4GHz radio for data communication. This product uses
Direct Sequence Spread Spectrum RF technology that allows for ultra-low power consumption
combined with a reduced sensitivity to background noise. That means less interference by other
radios that operate in the 2.4GHz band. The radio protocol that is used is based on the IEEE 802.15.4
standard that specifies the physical layer and media access control for low-rate wireless personal area
networks.
A development kit is available that consists out of a base station, several ESL tags and PC software
that allows people to quickly test the system and makes it easier to integrate this ESL system into an
existing back office system.
3 Physical Features
3.1 Dimensions
W 87.7 mm x H 42.8 mm x D 15 mm
Figure 1: Dimensions
3.2 Weight
47.8 g (including batteries)
6
Loading...