Opticon Sensors Europe EE201 User Manual

Electronic shelf label

Specifications Manual

EE202

The EE202 is an e-paper based electronic shelf label
with a screen size of 2” and with 802.15.4 based
wireless communication.

All information subject to change without noti ce.

Document History

EE202

Specifications Manual

Model Number:
Edition:
Date:

EE202

1.4
July 17, 2015

Specification Number:
Original Spec Number:

Copyright 2015 Opticon Sensors Europe BV. All rights reserved.

This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any
electronic or machine readable form without prior written consent of Opticon.

Limited Warranty and Disclaimers
PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE

PRODUCT.
Serial Number

A serial number appears on all Opticon products. This official registration number is directly related to the device
purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the
warranty.

Warranty

Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and
workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in
materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by
modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under
warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect,
consequential or incidental damages arising out of use or inability to use both the hardware and software, even if
Opticon has been informed about the possibility of such damages.

Packaging

The packing materials are recyclable. We recommend that you save all packing material to use should you need to
transport your product or send it for service. Damage caused by improper packaging during shipment is not covered by
the warranty.

Trademarks

Trademarks used are the property of their respective owners.
Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 12-

17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. T EL [phone]; FAX [phone]

SUPPORT

USA Europe

Phone: [phone] Phone: [phone]
Email: [e-mail] Email: [e-mail]
Web: www.opticonusa.com Web: www.opticon.com

2

EE202 Specifications manual

Contents

1. Abstract ..................................................................................................................................... 5

2. Overview ................................................................................................................................... 5

3. Physical Features ..................................................................................................................... 6

3.1. Dimensions ....................................................................................................................... 6

3.2. Weight ............................................................................................................................... 6

4. Environmental Specifications .................................................................................................. 6

4.1. Operating Temperature and Humidity ................................................................................ 6

4.2. Storage Temperature and Humidity ................................................................................... 6

4.3. Static Electricit y ................................................................................................................. 6

4.4. Drop resistance. ................................................................................................................ 6

5. Controls ..................................................................................................................................... 7

6. Electrical Specifications ........................................................................................................... 7

6.1. Electrical Characte ristics ................................................................................................... 7

6.2. Battery ............................................................................................................................... 7

7. Radio Specifications ................................................................................................................ 8

7.1. Protocol ............................................................................................................................. 8

7.1.1. The physical layer ...................................................................................................................... 8

7.1.2. The medium access control layer .............................................................................................. 9

7.2. Security ............................................................................................................................. 9

8. Labeling ..................................................................................................................................... 9

8.1. Product label ..................................................................................................................... 9

8.2. Shipment box labels ........................................................................................................ 11

9. Accessories ............................................................................................................................ 12

10. Packaging Specifications ....................................................................................................... 12

10.1. Individual Packaging Specification ................................................................................... 12

10.2. Collective Packaging Specification .................................................................................. 13

11. Regulatory Compliance .......................................................................................................... 14

11.1. Product Safety ................................................................................................................. 14

11.2. EMC ................................................................................................................................ 14

11.3. WEEE.............................................................................................................................. 15

11.4. RoHS .............................................................................................................................. 15

12. Safety ....................................................................................................................................... 16

12.1. Shock .............................................................................................................................. 16

12.2. Temperature Conditions .................................................................................................. 16

12.3. Foreign Materials ............................................................................................................. 16

3

EE202 Specifications manual

12.4. Battery ............................................................................................................................. 16

12.5. Other ............................................................................................................................... 16

13. Mechanical Drawing ............................................................................................................... 17

Table of Figures

Figure 1: Dimensions .................................................................................................................. 6

Figure 2: product label ................................................................................................................ 9

Figure 3: product label dimensions .............................................. Error! Bookmark not defined.

Figure 4: shipment box labels ................................................................................................... 11

Figure 5: HL hinged shelftaker for data strips. ........................................................................... 12

Figure 6: Individual packaging .................................................................................................. 12

Figure 7: Collective packaging 1 ............................................................................................... 13

Figure 8: Collective packaging 2 ............................................................................................... 13

Figure 9: Mechanical drawing ................................................................................................... 17

4

EE202 Specifications manual

1. Abstract

This manual provides specifications for the EE202 electronic shelf label (hereafter referred to as
“ESL”).

2. Overview

The EE202 is an E-ink based ESL with a 2.4GHz radio for data communication. This product
uses Direct Sequence Spread Spectrum RF technology that allows for ultra-low power
consumption combined with a reduced sensitivity to background noise. That means less
interference by other radios that operate in the 2.4GHz band. The radio protocol that is used is
based on the IEEE 802.15.4 standard that specifies the physical layer and media access control
for low-rate wireless personal area networks.

A development kit is available that consists out of a base station, several EE202 tags and PC
software that allows people to quickly test the system and makes it easier to integrate this ESL
system into an existing back office system.

5

EE202 Specifications manual

3. Physical Features

3.1. Dimensions

W 65.7 x H 34.9 x D 13.7 mm

Figure 1: Dimensions

3.2. Weight

40 g (including battery)

4. Environmental Speci fi c ations

4.1. Operating Temperature and Humidity

Temperature: -20 to 50° C
Humidity: 20% to 85% RH

4.2. Storage Temperature and Humidity

Temperature: -25 to 60° C
Humidity: 20% to 85% RH

4.3. Static Electricity

Air discharge: ± 8 kV MAX (No malfunction)

± 15 kV MAX (No destruction)

Contact discharge: ± 4 kV MAX (No malfunction)

± 8 kV MAX (No destruction)

4.4. Drop resistance.

There will be no sig n of decreased performance after the following drop test:
Drop the ESL from 1.8 M above the concrete floor (6 sides, 3 times each).
Scratches or discoloration of the casing do not decrease product performance.

6