Opticon Sensors Europe EE150 Users Manual

EE-150 V-0.1

EE-150

Electronic Shelf Label

The EE-150 is an e-paper based electronic shelf label with a screen

size of 1.54” and with 802.15.4 based wireless communication.

V-0.1

1

EE-150 V-0.1

The information in this document is subject to change without notice.

Document History

Model Number: EE-150 Original release date 19-05-2016
Revision: V-0.1 Date 12-9-2016

2016 Copyright Opticon. All rights reserved.

This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted
to any electronic or machine readable form without prior written consent of Opticon.

Limited Warranty and Disclaimers

Please read this manual carefully before installing or using the product.

Serial Number

A serial number appears on all Opticon products. This official registration number is directly related to
the device purchased. Do not remove the serial number from your Opticon device. Removing the
serial number voids the warranty.

Warranty

Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in
materials and workmanship for two years after purchase excluding batteries. Opticon will repair or, at
its option, replace products that are defective in materials or workmanship with proper use during the
warranty period. Opticon is not liable for damages caused by modifications made by a customer. In
such cases, standard repair charges will apply. If a product is returned under warranty and no defect is
found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect,
consequential or incidental damages arising out of use or inability to use both the hardware and
software, even if Opticon has been informed about the possibility of such damages.

Packaging

The packing materials are recyclable. We recommend that you save all packing material to use should
you need to transport your data collector or send it for service. Damage caused by improper
packaging during shipment is not covered by the warranty.

Trademarks

Trademarks used are the property of their respective owners.

Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of
OPTOELECTRONICS Co., Ltd., 12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002.
TEL [phone]; FAX [phone]

SUPPORT

USA Europe

Phone: [phone]
Email: [e-mail] Email: [e-mail]
Web: www.opticonusa.com Web: www.opticon.com

2

EE-150 V-0.1

Revision History

Product Name : EE-150

Edition Date Page Section Description of Changes

V0.0 2016/05/19 - - Preliminary Version

V0.1 2016/09/12

Added weight, Removed IP rating, changed FFCID
and changed temperature and humidity ranges

3

EE-150 V-0.1

Contents

1 Abstract ........................................................................................................................ 6

2 Overview ....................................................................................................................... 6

3 Physical Features ......................................................................................................... 6

3.1

Dimensions .............................................................................................................................. 6

3.2

Weight ...................................................................................................................................... 6

4 Environmental Specifications ..................................................................................... 7

4.1

Operating Temperature and Humidity ..................................................................................... 7

4.2

Storage Temperature and Humidity ........................................................................................ 7

4.3

Static Electricity ....................................................................................................................... 7

5 Controls ........................................................................................................................ 8

6 Electrical Specifications .............................................................................................. 9

6.1

Electrical Characteristics ......................................................................................................... 9

6.2

Battery ..................................................................................................................................... 9

7 Radio Specifications .................................................................................................. 10

7.1

Protocol .................................................................................................................................. 10

7.1.1 The physical layer .............................................................................................................. 10

7.1.2 The medium access control layer ...................................................................................... 10

7.2

Security .................................................................................................................................. 10

8 Labeling ...................................................................................................................... 11

8.1

Product Label ......................................................................................................................... 11

8.2

Shipment Box Labels ............................................................................................................. 12

9 Packaging Specifications .......................................................................................... 13

9.1

Individual Packaging Specification ........................................................................................ 13

9.2

Collective Packaging Specification ........................................................................................ 14

9.3

Collective Shipment Packaging Specification. ...................................................................... 15

10 Regulatory Compliance ............................................................................................. 16

10.1 Product Safety ....................................................................................................................... 16

10.2 EMC ....................................................................................................................................... 16

10.3 WEEE .................................................................................................................................... 17

10.4 RoHS ..................................................................................................................................... 17

11 Safety .......................................................................................................................... 18

11.1 Shock ..................................................................................................................................... 18

11.2 Temperature Conditions ........................................................................................................ 18

11.3 Foreign Materials ................................................................................................................... 18

11.4 Disposal / Battery................................................................................................................... 18

11.5 Other ...................................................................................................................................... 18

12 Mechanical Drawing ................................................................................................... 19

4

EE-150 V-0.1

Table of Figures

Figure 1: Dimensions ............................................................................................................................... 6

Figure 2: Product Label ......................................................................................................................... 11

Figure 3: Product Label dimensions ...................................................................................................... 11

Figure 4: Shipment box label ................................................................................................................. 12

Figure 5: Individual packaging ............................................................................................................... 13

Figure 6: collective packaging ............................................................................................................... 14

Figure 7: collective shipment packaging ............................................................................................... 15

Figure 8: Mechanical drawing................................................................................................................ 19

5

EE-150 V-0.1

1 Abstract

This manual provides specifications for the EE-150 Electronic Shelf Label (hereafter referred to as
“ESL”).

2 Overview

The EE-150 is an E-ink based ESL with a 2.4GHz radio for data communication. This product uses
Direct Sequence Spread Spectrum RF technology that allows for ultra-low power consumption
combined with a reduced sensitivity to background noise. That means less interference by other
radios that operate in the 2.4GHz band. The radio protocol that is used is based on the IEEE 802.15.4
standard that specifies the physical layer and media access control for low-rate wireless personal area
networks.

A development kit is available that consists out of a base station, several ESL tags and PC software
that allows people to quickly test the system and makes it easier to integrate this ESL system into an
existing back office system.

3 Physical Features

3.1 Dimensions

W x H x D = 45.5 x 39.9 x 14.8 mm

Figure 1: Dimensions

3.2 Weight

22.3 g (including battery)

6