Opticon Sensors Europe 2366 Specification leaflet

O0210000480 (eng) / O0210000490 (blanco)

dual reader

RF-IDtag / barcode

PHL 2700

RF-ID

handheld terminal

Opticon Sensors Europe B.V. / Opaallaan 35 / 2132 XV Hoofddorp / The Netherlands

phone: [phone] / fax: [phone] / e-mail: [e-mail]

internet: www.opticon.nl (www.opticon-sensors.com)

The PHL2700 terminal is a programmable handheld terminal, well suited
for a variety of indoor portable applications. Different identification
methods can be chosen for data collection: the built-in scanner is able
to read all popular barcodes in combination with RF-ID tags.
The PHL2700 terminal can be programmed in C-language. The clear
and easily readable graphic display enables the user to use the
terminal in combination with advanced application programs.
Operating power is supplied by the main battery. A rechargeable battery
pack, that can be charged in the cradle, or non-rechargeable penlite
batteries can be used.
For communication the PHL2700 is provided with an IrDA interface.
Through this interface the terminal is able to communicate with the
cradle, or apart from the cradle to all computer devices that use IrDA.
Also belt printers can easily be approached by the PHL2700 thanks
to the smart location of the IrDA window.

Features Benefits

Rechargeable Nickel Metal Hydride Long life batteries

battery pack

8 MB Memory available Enables continuous working

even with large data storage

Easily readable graphic display Enables advanced applications

RS232 data transmission Easy data storage into the

by cradle computer system

Built-in IrDA interface Ideal to use together with portable

computers, like note books.

Integrated laser technology Possibility to read both

and RF-ID technology bar codes and RF-ID tags

IRU2700

cradle for data transmission and

charging rechargeable battery pack

Dual data collection

programmability and portability

barcode reading and RF tag reading

in one terminal

Preliminary specifications

Environmental specifications

Temperature 0 - 40

o

C in operation

-20 - 60 oC in storage

Humidity 30 - 85 % in operation
(non condensing) 30 - 90 % in storage

Shock: vibration: 10 - 50 Hz with 1G for 30 min, cycle for X,Y,Z.

Emission According to EN50081, part 1

Immunity According to EN50082, part 1

Electrical specifications

Battery charging time when battery in terminal:

8 hours charge

Physical specifications

Dimensions (l x w x d) 150 x 90 x 81 mm

Case material ABS

Weight 250 g

Standard connector RS232 - D Sub 9P Female

RS485 - 6 pins modular plug

Functionality

Interfaces supported RS232

RS485

Serial communication RS232 Baudrate: 1200 - 115200

RS485 Baudrate: 1200 - 115200

Transmission modes Half duplex RS232

Half duplex RS485

Parity Odd, Even, None

IRU-2700 cradle

The Netherlands Hoofddorp - France Issy Les Moulineaux Cedex - Germany Mainhausen

Italy Bologna - Sweden Järfälla - U.K. Banbury, Oxon

Australia Lane Cove - Japan Ashibetsu - Warabi - Osaka - Taiwan Taipei - U.S.A. Orangeburg

Preliminary specifications are subject to change without notice. Printed 01-2003

Electrical specifications

Main battery rechargeable pack: Ni-MH

dry cell: Alkaline penlite
optional: other 2 x AA-size penlite

Main battery Ni-MH: When having every 10 seconds on:
operating time 1 sec laser, 0.4 sec. green LED, 0.4 sec. buzzer,

1 sec.

RFIDtag reading, 0,2 sec.

RFIDtag writing,

operating time is: approx. 22 hours

Alkaline: When having every 10 seconds on:
1 sec laser, 0.4 sec. green LED, 0.4 sec. buzzer,
1 sec.

RFIDtag reading, 0,2 sec. RFIDtag writing,

operating time is: approx. 43 hours

Different operation conditions affect the

operating time

Use of other penlite batteries affect the

operating time

Backup battery Lithium (CR2032)

Backup battery If fully charged: 30 days backup time
operating time

Battery management Low voltage indicated on the terminal display.

When battery is low the terminal switches
off automatically.

Charging method Rechargeable Ni-MH pack in terminal via

cradle

Specifications laser module (barcode reading)

Light source 650 nm visible laser diode

Scan rate 100 scans/sec

Decode rate 100 decodes/sec

Reading width 62 mm at 30 mm

111 mm at 100 mm

Resolution at PCS 0,9 0.15 mm (6mil)

Depth of field 0 - 140 mm (at PCS 0.9, res. 0.25)

Specifications RF-ID module (RF-ID tag reading)

Reading range up to 15 mm, dependent on type of RF-ID tag

Physical specifications

Dimensions (l x w x d) 177 x 62 x 41 mm

Case material ABS

Weight body (excl. battery): 195 g

Direct cable optional for maintenance: RS232 - DB9 female

PHL2700 RF-ID handheld terminal

Functionality

Memory ROM: 32 kB

FlashROM (for O/S and program): 512 kB
fast RAM: 2kB
battery backed up D-RAM (for data): 8 MB

Microprocessor 16-bit

Real time clock Quartz RTC, time and date programmable,

leap year handling, (accuracy +

60 sec./month)

Display 128x64 Pixels graphic LCD with backlight

Character fonts:

4/8 lines x 16 characters
5/10 lines x 21 characters

Keyboard 27 keys total (26 keys user definable)

8 Function keys

Alpha/Numeric mode

Trigger mode Manual

Programming Functionality is provided by user application. The

application may be downloaded from PC via cable,
com port or IrDA.

Interfaces supported RS232 by direct cable

RS232 by cradle
IrDA on terminal

Transmission speed RS232 direct cable: 2400 - 115200 baud

RS232 cradle: 2400 - 115200 baud
IrDA terminal: 2400 - 115200 baud

Environmental specifications

Temperature -10 - 40

o

C in operation

-20 - 60 oC in storage

Humidity 20 - 80 % in operation
(non condensing) 20 - 90 % in storage

Shock: drop: 1.5 m drop onto concrete surface

Shock: vibration: 10 - 50 Hz with 1G for 30 min, cycle for X,Y,Z.

Ambient light rejection fluorescent 3.000 lux max.

direct sun 50.000 lux max.

Emission According to EN50081, part 1

Immunity According to EN50082, part 1

R&TTE According to EN300-330

Protection against
dust and moisture According to IEC529, IP 42

Safety, Laser class According to IEC825, Class I laserproduct

Supported Chinese Post 2of5 - Codabar incl. ABC and CX - Code 39 - Code 93 - Code 128 - EAN-8 incl. +2,+5 - EAN-13 incl. +2,+5
symbologies IATA - Industrial 2of5 - Interleaved 2of5 - Italian Pharmaceutical - Laetus - Matrix 2of5

MSI/Plessey - UK/Plessey - S-Code - Telepen - UPC-A incl. +2,+5 - UPC-E incl. +2,+5

Supported RF Tags at 13.56 MHz Philips I-Code Texas Instruments Tag-It ISO 15693
Supported RF Tags at 134.2 kHz Texas Instruments TIRIS For other requests contact Opticon.