opticis ODSG-01-HS User Manual

Revision History

1. CONTENTS

ODSG-01-HS

HD/SDI Product Information

User’s Manual

© 2008 Opticis Co., Ltd. All Rights Reserved
Revision 1

Opticis Locations

Opticis Co., Ltd. Opticis North America Ltd.
#501 Byucksan Technopia, 434-6, 330 Richmond Street,
Sangdaewon-Dong, Chungwon-Ku,

Suite 100, Chatham, Ontario,

Sungnam City, Kyungki-Do, Canada N7M 1P7
462-120, South Korea
Tel: [phone] Tel.: [phone]
Fax: [phone] Fax: [phone]

For order support, please contact your Distributor or Reseller.

For technical support, check with the with the Opticis web site www.opticis.com

or

contact [e-mail]

Unpacking

Each OPTICIS HD/SDI converter package includes the following items;
OPTICIS HD/SDI(ODSG-01-HS) Unit

One (1) 5V, 3A Power Supply Adapter
Download cable
User manual

Troubleshooting

Problem Remedy Actions

Converter not

Operate

Make sure the 5V power is plugged in the
back of the unit.
Check to see if the power LED light is on.

No picture (or signal)

Or Poor picture

1. If you are using copper based HDMI cable,
overall length of the cables (length of the
cable from video source to switch and
length of the cable from switch to display)
should not exceed 20ft. Exceeding 20ft.
with copper based cables will result in no
or poor picture quality. To extend beyond
20ft, please use fiber optical HDMI/DVI
extension cables

2. Use high quality HDMI cables.

3. If you are using computers, try other
refresh rate settings. Most HDTVs have
refresh rate of 48Hz and computer’s video
cards are usually set at higher refresh rate.
Try lower refresh rates.

4. Make sure all HDMI connectors are tightly
secured to all HDMI ports. Loose plugging
on the HDMI connectors will result in no or
poor picture.

5. Turn off all equipments (video source,
switch and HDTV) and restart all
equipments.

Incorrectly sized picture /

resolution or No picture

Reset the product by power off.

1-9 Troubleshooting