opticis HDFX-250-TR User Manual

ㅕ

Manual Contents

__________________________________________

Manual Contents 1-0
Welcome! Product Description 1-1
System Requirements for Setup 1-2
Installation 1-3
Troubleshooting 1-5
Maintenance, Technical Support, and Service 1-6
Product Specifications 1-7
Warranty Information 1-8
Regulatory Statements 1-9

Pictorials

Figure 1 – Overall Connection of HDFX-250-TR 1-1
Figure 2 – Position of the LED 1-3
Figure 3 – Fiber numbering & Caution on both fiber ports 1-3
Figure 4 – Connection of optical fiber 1-4

1-0 Manual Contents

User’s Manual for the

HDFX-250-TR

Doc No. : OE-H130903-250 / Rev1.1

Two (2) fibers Detachable

HDMI Extender

Welcome!

Congratulations on your purchase of the two (2) fibers HDMI extender, HDFX­250-TR. This manual contains information that will assist you in installing and
operating the product.

Product Description

New optical HDMI extender, HDFX-250-TR is designed compact enough to be
fitted into various installation environments, and enables to transmit WUXGA
(1920x1200) or 1080p at 60Hz signal up to 300m (985feet) over two (2) LC
multi-mode fibers, avoiding any tricks like scaling or data compression for
lessening a burden of data transmission. It also supports 3D contents
transmission.

The pure fiber connection by two (2) LC fibers connector between transmitter
and receiver, gives clean, secure and easy installation with perfect electrical
isolation, but without electrical hazard and interference. The HDFX-250-TR can
be operated by DC power and only Receiver (Rx) can be operated by USB
power by plugging the USB cable included as a shipping group.

Figure 1 – Overall Connection of HDFX-250-TR

The Shipping Group of HDFX-250-TR;

 One (1) Transmitter (Tx) and One (1) Receiver (Rx)
 Two (2) HDMI copper cables (0.3m)
 One (1) USB to DC plug Cable
 Two (2) DC +5V,1A power adapters
 User’s Manual
 Option Product: LC Multi-mode fiber

1-1 Welcome, Product Description

System Requirements for Setup

□ Hardware requirements

▪ DVD, Blu-Ray or media receiver with standard HDMI ports.
▪ In case of using PC as a graphic source, regardless of OS

version embedded HDMI ports.

▪ Only HDMI TVs or monitors are applicable.
▪ Proper initial trial of the entire platform with its application using

a short length copper cable is recommended prior to install with
the optical link.

□ Software requirements

▪ No special needs, but make sure that media contents protected

by HDCP should be played with HDCP certified players and
TVs.

□ Power Technical Advisory

▪ Enclosed Power Adaptors and USB cables supply power to both

Transmitter and Receiver.

□ Connection Advisory

▪ It is highly recommend that HDMI media source is directly

connected into HDMI display output via HDFX-250-TR without
connection to incompatible distributor, switcher and selector.

1-2 System Requirements for Setup