opticis HDFX-150-TR User Manual

Manual Contents
__________________________________________
Manual Contents 1-0 Welcome! Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Troubleshooting 1-5 Maintenance, Technical Support, and Service 1-6 Product Specifications 1-7 Warranty Information 1-8 Regulatory Statements 1-9
Pictorials
Figure 1 – Overall Connection of HDFX-150-TR 1-1 Figure 2 – Position of the LED 1-3 Figure 3 – Fiber numbering & Caution on both fiber ports 1-3 Figure 4 – Connection of optical fiber 1-4
1-0 Manual Contents
User’s Manual for the
HDFX-150-TR
Doc No. : OE-H130903-150 / Rev1.1
Four (4) fibers Detachable
HDMI Extender
Welcome!
Congratulations on your purchase of the Four (4) fibers HDMI extender, HDFX­150-TR. This manual contains information that will assist you in installing and operating the product.
Product Description
New optical HDMI extender, HDFX-150-TR is designed compact enough to be fitted into various installation environments, and enables to transmit WUXGA (1920x1200) or 1080p at 60Hz signal up to 300m (985feet) over four (4) LC multi-mode fibers, avoiding any tricks like scaling or data compression for lessening a burden of data transmission and supports 3D contents transmission.
The pure fiber connection by four (4) LC fibers connector between transmitter and receiver, gives clean, secure and easy installation with perfect electrical isolation, but without electrical hazard and interference. The HDFX-150-TR can be operated by either USB power by USB to DC plug cable or 5V DC power adapter included as a shipping group.
Figure 1 – Overall Connection of HDFX-150-TR
The Shipping Group of HDFX-150-TR;
One (1) Transmitter (Tx) and One (1) Receiver (Rx) Two (2) HDMI copper cables (0.5m) Two (2) USB to DC plug Cables One (1) DC +5V,1A power adapter Users Manual Option Product: LC Multi-mode fiber
1-1 Welcome, Product Description
System Requirements for Setup
Hardware requirements
DVD, Blu-Ray or media receiver with standard HDMI ports. PC with HDMI port regardless of OS version. Only HDMI TVs or monitors are applicable. Proper initial trial of the entire platform with its application using
a short length copper cable is recommended prior to install with the optical link.
Software requirements
No special needs, but make sure that media contents protected
by HDCP should be played with HDCP certified players and TVs.
Power Technical Advisory
Enclosed 5V DC Power Adaptor and USB to DC plug cables
supply power to both Transmitter and Receiver.
Connection Advisory
It is highly recommend that HDMI media source is directly
connected into HDMI display output via HDFX-150-TR without connection to incompatible distributor, switcher and selector.
1-2 System Requirements for Setup
Loading...
+ 4 hidden pages