Optex RBM-100QN-IP, RBM-60QN-IP Specsheet

REDBEAM

series

Network Photoelectric Detector

RBM-60QN-IP RBM-100QN-IP RBM-200QN-IP

The REDBEAM series is a photobeam that is
compatible with a network connection. It can connect
to Video Management Software platforms and control
IP cameras.

REDBEAM is a Quad High Power Beam that combine
precise detection capability with
increased reliability providing superior outdoor
detection in a smart design.

REDBEAM generates an orginal ASCII code (Redwall
Event Code). Video Management Software receives
the event code and sends a command to a camera
pre-set and/or start recording.

FEATURES

FEATURES

• Sniper viewfinderTM with 2X magnification

The new telescopic lens has a high level of visibility for
optical alignment.

• Vivid interior color

Easy-to-see vivid interior color for optical alignment.

• Alignment dial

The alignment dials make adjustments an easy task without the
need of a screwdriver.

SPECIFICATIONS

SPECIFICATIONS

RB

M

Model

Maximum detection range

Maximum arrival distance

Detection method

Interruption time

Power source

Current draw

Alarm output

Output

Alarm period

Tamper output

Operating temperature

Operating humidity

Alignment angle

Dimension

Weight

International protection

RBM-60QN

60m / 200ft.

600m / 2000ft.

Quad infrared beam interruption detection

Variable between 50/100/250/500 ms (4 steps)

38mA

Transmitter:8mA

( ) ( )

Receiver:30mA

Form C relay : 30VDC, 0.2 A

N.C. (contact output) : 30VDC, 0.1A Opens when cover removed.

without the back box : H x W x D mm (inch): 448 (17.6) x 79 (3.1) x 96 (3.8)
with the back box: H x W x D mm (inch): 452 (17.8) x 83 (3.3) x 138 (5.4)

2800g(98 oz) (Total weight of Transmitter + Receiver, excluding accessories)

-25°C - +60°C (-13°F - 140°F)

±90° Horizontal, ±10° Vertical

-100QN

100m / 350ft.

1000m / 3500ft

10.5 - 30VDC

39mA

Transm

itter:9mA

Receiver:30mA

2sec (±1) (Nominal)

95% (max.)

IP65

RB

200m / 650ft.

.

2000m / 6500ft.

Transmitter:10mA

( )

Receiver:30mA

M

-200QN

40mA

REDBEAM is compatible with Power over Ethernet
(PoE). IEEE802.3 af/at makes it possible to supply
power using a PoE hub or switch. Only one LAN cable
is needed to connect PIE-1 (Redwall PoE IP Encoder)
to a hub or switch reducing your installation time and
cost.

• IP65 water proof structure

Rubber packing is used for all conceivable points where water or
dust may penetrate, such as wiring holes,
wire ports and the outer openings on chassis.

• Quad beam with aspherical lenses

The high-grade aspherical lens creates a more sharply defined and
precise active infrared beam.

• Compatible with Power over Ethernet (PoE)

REDBEAM can supply power to detector using a PoE hub or switch.

Power supply

Power output

Signal input

Place of use

Alarm output

Operating temperature

Operating humidity

Operation LED (Normal)

Operation LED (When communicating)

Function setting

Dimension

Weight

Supported protocols

* Required power less than 12.95W, can use the PoE Hub.
Required power less than 25.5W, can use the PoE Plus Hub.
* Specifications may be modified without prior notice.

PIE-1

PoE* (IEEE802.3af/at compliant)

24VDC 800mA max, 12VDC 50mA max

5 input for dry contacts (N.C. only)

Outdoor (Inside of the waterproof case)

Redwall event code (UDP/TCP)

-40 to +60°C (-40 to + 140°F)

95% RH. max

Green light is ON when the power is supplied by PoE

Yellow light blinks during communication

Use web browser

67.5mm x 94.7mm x 33.0mm (2.66” x 3.73” x 1.30”)

270g ( 9.5oz : including all parts, Main unit : 90g / 3.2oz)

IPv4, ARP, UDP, TCP, ICMP, HTTP

SYSTEM EXAMPLE

SYSTEM EXAMPLE

OPTIONS

OPTIONS

Anti Bird Cap ABC-4

Keep birds and small animals
off the detector to reduce
false alarms.
Stop rain and snow
streaming in front of the
detector to keep
the sensitivity.

Back Cover BC-4

Conceal the back side of pole
mounted detector.

Camera

Pole Side Cover PSC-4

Conceal the gap between two
pole mounted detectors in
back to back.

Patent

pending

REDBEAM

Video Management Software

PoE hub or switch

Conduit Bracket CBR-4

Bracket for connecting the
conduit pipe.

series

Heating unit HU-3

Conceal the gap between two
pole mounted detectors in
back to back.

DIMENSIONS

DIMENSIONS

RBM series without the back box

79(3.1)

448(17.6)

96(3.8)

83.5

(3.28)

(WALL)

222(8.7)(POLE1)

265(10.4)(POLE2)

RBM series with the back box PIE-1

83(3.3)

83.5

(3.28)

452(17.8)

138(5.4)

(WALL)

222(8.7)(POLE1)

265(10.4)(POLE2)

390(15.4)(WALL)

• Power input

24VAC/DC

• Current draw

210mA(max.) (Per 1 unit)

• Thermo switch

60°C (140°F)

94.7(3.73)

67.5(2.26)

33(1.3)

Unit:mm(inch)

OPTEX CO., LTD. (ISO 9001 Certified / ISO14001 Certified)

5-8-12 Ogoto, Otsu, Shiga, 520-0101 Japan
TEL [phone] FAX [phone] http://www.optex.co.jp/e/

OPTEX INCORPORATED (USA)
OPTEX (EUROPE) LTD. (UK)

(ISO9001 Certified)

OPTEX SECURITY SAS (FRANCE)
OPTEX SECURITY Sp. z o.o. (POLAND)

http://www.optexamerica.com/

http://www.optex-europe.com/

http://www.optex-security.com/

http://www.optex.com.pl/

No. 77036-15747-1210