Page 1
Wide Angle Outdoor Detector
Wide Angle Outdoor Detector
QX Infinity series
QX Infinity series
BATTERY OPERATED MODEL
Introduction
1
PDF download
information
available in;
https://navi.optex.net/manual/50337
Manufacturer s statement
2
and
additional
with
multilanguage
59-2781-1 2003-31
INSTALLATION INSTRUCTIONS
EN
QXI-R: Standard Battery Operated Model
QXI-RDT-X5: +Microwave detection (10.525 GHz)
QXI-RDT-X8: +Microwave detection (10.587 GHz)
QXI-RDT-X9: +Microwave detection ( 9.425 GHz)
FR
Le téléchargement PDF et des informations supplémentaires multilingues sont disponibles dans l'URL indiquée.
PDF-Download und zusätzliche Informationen in mehreren Sprachen finden Sie unter der angezeigten URL.
DE
Scarica il PDF e ulteriori informazioni multilingua all'URL indicato.
,
IT
La descarga de PDF y la información adicional en varios idiomas están disponibles en la URL que se muestra.
ES
Arquivo em PDF e informações adicionais com vários idiomas, disponíveis no URL mostrado.
PT
Meertalige PDF-downloads en aanvullende informatie zijn beschikbaar in de getoonde URL.
NL
Wersja pdf i dodatkowe informację w innych językach dostępna na stronie.
PL
Installation
3
Cover
Lens
Warning
!
< QXI-RDT only >
!
Main unit
Do not touch the
parts with this sign.
Base
LED
[1] Warm-up
[2] Alarm
[3] Walk test end
Prohibited Recommended
MaximumTransmitter
(mm)
Size
30
50
90
Mounting height
Multi Level
Pet Alley
Microwave module
2.2 m (7 3 ) to 2.7 m (8 11 )
0.8 m (2 7 ) to 1.2 m (4 )
!
(QXI-RDT only)
!
Tamper switch
Seconds
60
2
5
!
Caution
MW Sensitivity
L H
Default
Mirror
Except levers
!
on side
DIP switch
PIR sensor
!
Tilt
Connectors
<Accessories>
Remove unused battery in case of battery sharing.
(See Web manual for details)
Red
Power
Black
White
Alarm
Yellow
Green
Trouble
Dummy battery
and Connector for
ALARM
Blue
Connector for sharing
of the transmitter’s battery
(See Web manual for details)
Mounting screw
(4 × 20 mm) x 3
Transmitter sideMain un it sid e
Red
Black
White
Yellow
Green
Blue
Connector for
TROUBLE
Fixing screw
for the Main unit
(3 × 12 mm) x 1
How to open the cover
Lock screw
(optional)
* Remove before,
if used.
[1] Unlock the cover using a
screwdriver (-).
[2] Lift the cover up.
Battery Life (DIP SW No.5)
CR123A
(3 V DC, 1,300 mAh)
Wall tamper option
Battery saving timer
QXI-R
QXI-RDT
Unit: estimated years
120 5
6 5
4 3
Battery sharing
[2] CR123A
(See Web manual for details)
[1] Install dummy battery
in transmitter
- 1 -
Cover lock screw
(optional)
<Options>
Area masking strips
b
c
d
e
ｆ
CA-1W(W)
Bracket for wall mount
a
b
c
d
e
ｆ
e
ｆ
d
c
b
a
b
c
d
ｆ
e
CA-2C(W)
Bracket for ceiling mount
Page 2
Settings
4
4-1. Detection area
Multi Level
Pet Alley
[1], [4]
Top view
Side view
Side view
[1] Loosen the fixing screw, if used.
[2] Slide the Main unit down.
[3] Rise the mirror up to the fixing position.
[4] Tighten the fixing screw as before.
0
5
7.5 m
6
4
2
0
2
4
6 20
7.5 m
0
5
0
2.2 m
2.7 m
0
5
0
0.8 m
1.2 m
0
20
10
15
3
1510
3
15
10
3
303525
9
6
25920
30
6
25
20
30
9
6
[2]
[3]
40 ft.
25 ft.
20
15
10
MW
5
0
PIR
5
10
15
25 ft.
12 m
40 ft
35
MW
PIR
12 m
35
40 ft
PIR
MW
12 m
4-2. DIP switch settings
PIR sensitivity
DIP switch ON OFF
Super High
3 4 3 4
Middle
Default
3 4 3 4
High
Low
4 5 6 7 8
3
2
1
[8]
[7]
Future use
[6]
Battery
[5]
saving timer 5 s 120 s
[4]
See right for the PIR sensitivity
[3]
[2]
Alarm output N.O. N.C.
[1]
LED ON OFF
Default
4-3. Walk test
[1] Close cover [2] Walk test (3 minutes) [3] Walk test ends
3
3
LED flashes 5 times
3
NOTE
With the cover open, the tamper activates.
This enables the LED function, regardless of DIP switch [1] setting.
When the cover is closed, the Walk test timer starts and automatically returns
to the normal mode after 3 minutes.
If the unit is powered up with the cover closed, it will not enter walk test mode.
Open and close the cover once to activate the walk test timer.
Specifications
5
5-1. Specifications
Model
Detection method
PIR coverage
PIR zones
Detectable speed
Sensitivity
Pet alley
Power source
Current draw
Alarm period
Warm-up period
Alarm output
Trouble output
(with tamper)
LED indicator
Operation temperature
Environment humidity
Internation protection
Mounting
Mounting height
Weight
Accessories
• Specifications and designs are subject to change without prior notice.
• These un its are de signed t o detect a n intruder and ac tivate an alarm c ontro l panel.
Being on ly a part of a c omplete system, we cannot accept responsibilit y for any dam ages or
other cons equenc es result ing fro m an intrusion.
-40℃ to +60℃(-40°F to +140°F) -40℃ to +45℃(-40°F to +113°F)
[1] Dummy battery and connector for ALARM
[2] Connector for sharing of the transmitter’s battery
[3] Connector for TROUBLE [4] Mounting screw (4 x 20 mm) x 3
[5] Fixing screw (3 x 12 mm) x 1 [6] Area masking strips
QXI-R
Passive infrared
Pet alley： 18 zones
Remove lower area detection to avoid small animals.
9 µA stand-by 16µA stand-by
11 mA max. at 3 V DC 11 mA max. at 3 V DC
N.C/N.O. switchable solidstate switch, 3 V DC 0.01 A max.
N.C/N.O. switchable solidstate switch, 3 V DC 0.01 A max.
[1] Warm-up [2] Alarm [3] Walk test end
12.0 m (40') 120°wide
Multi level： 40 zones
0.3 to 2.0 m/s (1' to 6'7"/s)
2.0℃ ( 3.6°F) at 0.6 m/s
CR123A (3 V DC)
2.0 ± 0.5 s
Approx. 60 s (LED blinks)
95% max.
IP 54
Wall (Outdoor, Indoor)
Multi level： 2.2 to 2.7 m (7' 3" to 8'11")
Pet alley： 0.8 to 1.2 m (2' 7" to 4' )
215 g (7.58 oz) 230 g (8.11 oz)
QXI-RDT
Passive infrared & Microwave
*Not included.
5-2. Dimensions
78(3.07)
83.5 (3.28)
144.5 (5.69)
Unit: mm (inch)
Unit: mm (inch)
5-3. Compliance
OPTEX declares that QXI-RDT-X5, QXI-RDT-X8 and QXI-RDT-X9 comply with RE
■
Directive 2014/53/EU. Doc documents can be found on our website; www.optex.net
■
Microwave emission Frequency and Power
QXI-RDT-X5: 10.525 GHz 12.51 mW e.i.r.p
QXI-RDT-X8: 10.587 GHz 12.00 mW e.i.r.p
QXI-RDT-X9: 9.425 GHz 18.16 mW e.i.r.p
The following list indicates the areas of intended use of the equipment and any known
■
restrictions. For countries not included in this list, please consult the responsible
Spectrum Management Agency.
10.525 GHz: Belgium, Denmark, Finland, Germany, Greece, Italy, Luxembourg,
The Netherlands, Spain, Sweden, Iceland, Norway, Switzerland
10.587 GH z: Belgium, France, Germany, Ireland, Luxembo urg,
The Neth erlands, United K ingdom
9.425 GHz: Austria, Czechia, Esthonia, Germany, Slovakia, Turkey, Russia
QXI-RDT-X5, QXI-RDT-X8 and QXI-RDT-X9 also comply with EU radiation exposure
■
limits set forth for an uncontrolled
and operated with minimum distance
environment. This equipment should be installed
20 cm between the radiator & your body.
EU contact information
Manufacturer:
OPTE X CO., LTD.
5- 8-12 Ogoto O tsu Shi ga, 520 -0101 JA PAN
Authorized representati ve in Europe:
OPTE X (EUROP E) LTD./EMEA HE ADQUARTERS
Unit 13, Cordwa llis Par k, Clivemon t Road,
Maiden head, Berkshire, S L6 7BU U.K .
OPTEX IN C./AMERICAS HQ (U.S.)
www.optexamerica.com
OPTEX (EURO PE) LTD./EMEA HQ (U.K.)
www.optex-europe.com
OPTEX TECH NOLOGIES B.V.
(The Neth erlands)
www.optex-europe.com/nl
- 2 -
OPTEX CO., LTD. (JAPAN)
www.optex.net
OPTEX SECUR ITY SAS (France)
www.optex-europe.com/fr
OPTEX SECUR ITY Sp. z o.o. (Poland)
www.optex-europe.com/pl
OPTEX PIN NACLE INDIA ,
PVT., LTD. (India)
www.optexpinnacle.com
OPTEX KOREA CO., LTD. (Korea)
www.optexkorea.com
OPTEX (DO NGGUAN) CO.,LTD.
SHANGHA I OFFICE (China)
www.optexchina.com
OPTEX (T hailand) CO., LTD. (Thailand)
www.optex.co.th
Copyrig ht (C) 2019-2020 OPTEX CO.,LTD.
Loading...