Optex PIE-1 Specsheet
Quality detection system for video surveillance
Unrivalled performance
PoE IP Encoder
PIE-1
PIE-1 is an encoder that converts analog relay
outputs to original ASCII code (Redwall Event Code)
for Redwall and Fiber SenSys detectors. Detectors
can be connected to Video Management Software
platforms with PIE-1 and control IP cameras.
PIE-1 is generating Redwall Event Code using the
analog alarm inputs from the Redwall and Fiber
SenSys detectors. Video Management Software
receives the event code and sends a command to
reposition to a pre-set and/or start recording with a
camera.
PIE-1 is compatible with Power over Ethernet (PoE).
IEEE802.3 af/at making it possible to supply power
using a PoE hub or switch.
Only one LAN cable is needed to connect PIE-1 to a
PoE hub or switch reducing your installation time and
cost.
FEATURES
FEATURES
• Change Analog to IP
PIE-1 changes analog relay output signals (N.C.) to original ASCII code.
• Compatible with Power over Ethernet
PIE-1 can supply power to detector using a PoE hub or switch.
SPECIFICATIONS
SPECIFICATIONS
PIE-1
Power supply PoE (IEEE802.3af/at compliant)
Power output 24 VDC 800 mA max, 12 VDC 50 mA max
Signal input 5 input for dry contacts (N.C. only)
Place of use Outdoor (Inside of the waterproof case)
Alarm output Redwall Event Code (UDP / TCP)
Operating temperature -40 to +60˚C (-40 to +140˚F )
Operating humidity 95%RH. max
Operation LED (Normal) Green light is ON when the power is supplied by PoE
Operation LED (When communicating) Yellow light blinks during communication
Switch Ethernet converter / LAN through
Function setting Use web browser
Dimension 67.5 mm x 94.7 mm x 33 mm (3.66” x 3.73” x 1.30”)
Weight 270 g (8.8 oz: including all parts) Main unit: 90 g (3.2 oz)
Supported protocols IPv4, ARP, UDP, TCP, ICMP, HTTP
Accessories
Power output cable x2, Alarm input cable x3, Installation instruction, Mounting plate for a Double Gang Box,
Gasket sheet for Gang Box, Mounting Screws x6
∗ Specifications and design are subject to change without prior notice.
PoE IP Encoder
PIE-1
FEATURES
FEATURES
Control IP camera Via Video Management Software
IP camera
Detect! Preset1
Connector for dry contact
Connector for the power
Redwall Event Code
Redwall Event Code & PoE
Redscan series
(PoE only)
PIE-1
SIP Series
Redwall Event Code
PIE126MOA1_
“PIE126” AND “A1” = Preset1
Video Management Software
Camera
Go to Preset1
Video Management
Software
PoE hub or switch
Photo electric
detector
DIMENTIONS
DIMENTIONS
94.7(3.73)
OPTEX CO., LTD. (ISO 9001 Certified / ISO14001 Certified)
5-8-12 Ogoto, Otsu, Shiga, 520-0101 Japan
TEL +81(0)77 579 8670 FAX +81(0)77 579 8190 http://www.optex.co.jp/e/
OPTEX INCORPORATED (USA)
OPTEX (EUROPE) LTD. (UK)
(ISO9001 Certified)
OPTEX SECURITY SAS (FRANCE)
OPTEX SECURITY Sp. z o.o. (POLAND)
http://www.optexamerica.com/
http://www.optex-europe.com/
http://www.optex-security.com/
http://www.optex.com.pl/
SIP series
67.5(2.26)
Fiber sensys detector
(
1 or 2 channels model only
)
33(1.3)
Unit: mm(inch)
No.77033-00-17440-1207
Loading...