Optex CX-702, CX-702RS Specsheet
Detection Patterns
WIDE ANGLE LONG RANGE
010
30
20
10
0
10
20
ft. 30
0 5 10 15
0 102030405060
5
8
ft. 12
0
Specfications
CX-702
Detection method
Coverage
Detection zones
Mounting height
Sensitivity
Detectable speed
Power input
Current draw
Alarm period
Alarm output
Tamper switch
Pulse count
Warm-up period
LED indicator
RF interference
Operating temperature
Environmental humidity
Weight
Passive infrared
Wide angle 85°wide
21m x 21m (70ft. x 70ft.)
68 zones
1.5m - 3.6m (5 - 12ft.)
1.6°C at 0.6m/sec. (2.4m mounting height)
3°F at 2ft./sec. (8ft. mounting height)
0.3 - 1.5m/sec. (1 - 5ft./sec.)
9.5 - 16V DC
8mA (normal) /11mA (max.) at 12V DC
Approx. 2.5 sec.
N.C. 28V DC 0.2A max.
N.C. Opens when cover is removed.
28V DC 0.1A max.
Approx. 20 sec. 2 or 4
Approx. 60 sec.
Alarm condition
No alarm 30V/m
20°C - 50°C ( 4°F - 122°F)
95% max.
200g (7.0 oz.)
20 30 40 50 60 70ft.
20 21 m
70ft.
1.5
2.4
5 10 15 20 21 m
3.6 m
Long range
45m x 2.4m (150ft. x 8ft.)
22 zones
10
5
0
5
10 m
PASSIVE INFRARED DETECTOR
0
TOP VIEWTOP VIEW
SIDE VIEWSIDE VIEW
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 ft.
5
0
ft. 5
0
5 1015202530354045m
0 10203040506070
5
8
ft. 12
0
5 101520
80 90 100 110 120 130 140
25 30 35 40 45 m
CX-702V (Alarm Memory Version)
Polarity
Alarm memory
Current draw
Positive
armed: open or 5 - 16V DC
8mA (normal) /16mA (max.) at 12V DC
Negative (cut jumper)
armed: 0 - 1V DC (grounded)
CX-702RS (Battery Operated Version)
Power input
Current draw
Alarm output
Alarm interval
3 - 9V DC alkaline battery or lithium battery
5 A (In standby) 10mA (In walktest, LED on)
Form C 10V DC 0.01A max.
Succeeding signals are not output even though
detection occurs within 2min. after the first alarm.
Tamper switch
Warm-up period
RF interference
Operating temperature
Form C 28V DC 0.1A max.
Approx. 90 sec.
No alarm 20V/m
10°C - 50°C ( 14°F - 122°F)
Dimensions
100 (3.94)
150 ft.
2
1
0
1
2m
1.5
2.4
3.6 m
CX-702
Other CX Detector
CX-502 / 502AM (Anti-Masking Model)
15 x 15m (50 x 50ft.) 85˚ Wide,
24 x 2.3m (80 x 7.7ft.) Long
*Specifications and design are subject to change without prior notice.
NOTE:
This unit is designed to detect movement of an intruder and activate an alarm
control panel. Being only a part of a complete system, we cannot accept
responsibility for any damages or other consequences resulting from an
intrusion. This product conforms to the EMC Directive 89/336 EEC.
Dimension : mm (inches)
“Take Care of the Environment”
This catalogue uses recycled paper
140 (5.51)
69 (2.72)
OPTEX CO., LTD. (ISO 9001 Certified by LRQA)
4-7-5 Nionohama Otsu, 520-0801 Japan
TEL (077)524-6047 FAX (077)522-9022
http://www.optex.co.jp/e/sec/index.html
OPTEX INCORPORATED (USA)
OPTEX (EUROPE) LTD. (UK)
OPTEX SECURITY SAS (FRANCE)
OPTEX KOREA CO., LTD. (KOREA)
No. 75077-01-909-0310
Double the Basic Performance and Easy Installation!
Optex Ensures Reliability Even for
Protecting Large Indoor Venues.
21m (70ft.) Wide-Angle, 45m (150ft.) Long-Range Detection Ideal for Commercial and Industrial
Applications
Completely Sealed Optics with Dual Structure
Double Conductive Shielding of Pyro Electric Element
Dual Purpose Lens
Double Easy Knockout
Easy-to-View LED
Sufficient Space for Wiring
The Optex CX-702 Delivers Reliable
Detection in Large Commercial Buildings
CX-702
High Reliability Performance
Multi-Focus Optics (Patent Listed)
The highly accurate and reliable detection pattern will
maintain its sensitivity throughout the entire detection area,
even in high temperature or low contrast environments.
Multi-Focus Optics create an extremely high vertical zone
density, two or three times the size of conventional PIRs.
These taller zones capture the entire body mass and enable
detection of even the smallest temperature contrast against
the temperature of the background. In addition, the vertical
detection density has been improved to take into account
dead zones created by furniture or partitions.
Sealed Optics__Complete Shielding
with Dual Structure
The pyro electric element
is completely sealed with
the dual-structured
internal molding of the
housing cover, thus
preventing false alarms
caused by drafts and
small insects from getting
inside.
Conventional
Structure
CX-702
CX-702's
Dual Structure
Lens Lens Holder
LED Indicator
Wiring Knockout
Mounting Knockout
Terminals
Sensor
Tamper Switch
Mounting Knockout
Cover
Double Conductive
Shield
Ordinary Optics OPTEX Multi-Focus Optics
Multi Focus
Infrared Ray
Conventional
Models
CX-702
Series
Ordinary
Optics
Pyro Elec.
Element
3.6(12)
Height [m(ft.) ]
3.6(12)
Height [m(ft.) ]
Low Alarm Signal
0
0
Poor
Detection
5(16) 10(33) 15(50) 21(70)
5(16) 10(33) 15(50) 21(70)
Infrared Ray
Distance [ m(ft.) ]
Distance [ m(ft.) ]
Optics
High Alarm Signal
Pyro Elec.
Element
Patented Double Conductive Shielding
The Double Shielding lets infrared energy pass through, but
blocks out light sources since it features a special
conductive filter that covers the element window.
Double Conductive Shielding
Amp
Reliable
Detection
Spherical Lens Design
Conventional flat lenses inevitably create sensitivity
distortion problems when they are bent to fit a curved
housing. OPTEX's spherically designed lens will obtain
sharp detection because no bending is required.
The Optex lens is designed to
collect IR energy from the
detection area, and focus it
directly onto the pyro.
Optex Lens
Since a flat lens is "bent,"
sensitivity distortion occurs at
both sides of the lens (the lens
surface is not directing IR
energy correctly), resulting in
poor sensitivity for long distance
detection applications.
Conventional Lens
Dual Purpose Lens
By simply rotating the spherical lens,
you can select between Wide Angle
and Long Range patterns. The CX702 will instantly provide reliable and
precisely accurate detection for each
pattern.
PYRO
PYRO
Temperature Compensation Circuit
The Temperature Compensation Circuit will bring stable
detection capability under high temperature conditions,
where the background temperature is similar to that of the
human body. It maintains a high level of false alarm
protection while providing accurate detection by
automatically adjusting its sensitivity according to the
environmental temperature.
False Alarm Protection
RFI Protection
Built-in noise reduction chip blocks out RFI noise with field
strength of 30V/m.
Temperature Protection (CX-702 and 702V only)
No alarm in high, low and changing temperatures from
20˚C to 50˚C ( 4˚F to 122˚F)
.
Disturbance-Free Tamper Switch
Completely sealed housing structure greatly eliminates
disturbances to Tamper Switch.
Installation Reliability
Double Easy-Knockout
Compatible with two types of cables: a thick, 8mm (0.3inch)
diameter cable and a thin, 5mm (0.2inch) diameter cable.
5mm (0.2inch) cable 8mm (0.3inch) cable
Sufficient Space for Wiring
3-Step Angle Adjustment
Easy-To-View LED
Selectable Pulse Count: 2 or 4
Lens
Infrared Rays
Pyro Electric Element
Double Shielding
Wide Angle Long Range
CX-702 Standard
CX-702V Alarm Memory
CX-702RS Battery Operated, Form C
CA-1W
CA-2C
BA-70
Wall Mount Multi-Angle Bracket
Ceiling Mount Multi-Angle Bracket
Backbox for wireless transmitter
Loading...