Optex BX-100PLUS Specsheet

BX-100PLUS

Alarm before burglar breaks-in!

Optex presents a new concept, , which offers more reliable protection and
security options. Especially, this is designed to protect the immediate perimeter of the building.
Windows and roll-up doors have been secured only by magnetic contacts or glass break detectors
so far. Now, protects a building’s exterior by detecting intruders before entry
is attempted and can also provide a deterrent with a sounder before the break-in occurs.

BX-100PLUS

Unit Base
Wiring Hole

Terminals
Tamper Switch

Status Selector/
Mode Selector (Receiver Only)

Audio Level Selector
(Receiver Only)

Power Indicator (Transmitter)
Alarm LED Indicator/
Alignment LED Indicator (Receiver)

Optical Unit
Audible Alignment/

Alarm Indicator

APPLICATIONS

OFFICESHOP RESIDENCE WAREHOUSE

“

FEATURES

 FULL TIME (NO/NC) RELAYS

Separate Form A and Form B relays can be used for Security and other functions.
Local alarm, annunciation and automation can work simultaneously.

Cover

 ATTRACTIVE, SLENDER DESIGN

A smaller design and optional white, paintable cover will allow the unit to harmonize
with any type of architecture.

 EASY ALIGNMENT WITH VISUAL AND AUDIBLE INDICATOR

No vertical adjustment is necessary in this detector.
A sounder activates and LED comes on when the sensor is miss-aligned and shuts off
when aligned. This will assist you in the alignment process. Also, the Audible
Alignment/Alarm Indicator can be used as a deterrent to intruders. This option can be
turned on or off with a switch inside the detector.

 LIGHT REDUCTION FILTER

Increases the units resistance to external light sources making it more reliable and also
less likely to be defeated by alternative light sources.

 MAX 99 PERCENT BEAM BLOCKAGE

It will increase the units resistance to false alarms caused by environmental
disturbance such as fog in the condition the beam alignment status achieves the
highest level.

SPECIFICATIONS DIMENSIONS OPTIONS

Model

Range

Maximum Arrival Distance
Detection Method
Beam Characteristics
Interruption Period
Power Input
Current Draw
Alarm Period

Relay Output

Beeping Period
Volume of Audible Alarm
Indicator
Tamper
Operating Temperature
Environmental Humidity
Alignment Angle
Mounting
Weight
IP rating

Accessories

* Specifications and design are subject to change without prior notice.
NOTE: This unit is designed to detect an intruder and activate an alarm control panel. Being only a part of a
complete system, we cannot assume responsibility for theft or damages, should it occur.

Simultaneous interruption of 2 infrared beams

BX-100PLUS

Outdoor : 30 m (100 ft.)

Indoor : 60 m (200 ft.)

300 m (1,000 ft.)

Pulsed Infrared

50 msec

10.5 - 28V DC

55mA (Stand by) / 75mA (Max)

2 ± 1 sec (Delay)

2 relay outputs N.O. and N.C.

28VDC 0.2A (Max) each

15 ± 1 sec (Delay)

Approx. 70 dB (at 1 meter distance)

N.C. opens when cover is removed

-35˚C ~ 55˚C (-30˚F ~ 131˚F)
95% (Max)

±92˚ Horizontal

Wall (indoor/outdoor)

400 g (14.1 oz)

IP 54

Self Tapping Screws x 4

Wiring Sponges x 2

51.5 (2.03)

61 (2.40)

230.5 (9.08)

mm (inch)

 SPACER : SP-1

For use when height adjustment of the unit is
required.

 METAL GUARD : MG-1

Helps to protect the unit from tampering or
vandalism.

 WHITE DECORATIVE COVER : WC-1

Allows the unit to harmonize with various

22.5 (0.89)

types of architecture. Hood is included

pitch 88.5 (3.48)

which can be fixed to this cover for rain
and frost proof.

“Take Care of the Environment”
This catalogue uses recycled paper

OPTEX CO., LTD. (ISO 9001 Certified by LRQA)

4-7-5 Nionohama Otsu, 520-0801 Japan
TEL [phone] FAX [phone]
http://www.optex.co.jp/e/sec/index.html

OPTEX INCORPORATED (USA)
OPTEX (EUROPE) LTD. (UK)
OPTEX SECURITY SAS (FRANCE)
OPTEX KOREA CO., LTD. (KOREA)

No.75033-04-909-0312