Optex AX-350TF, AX-650TF Installation

PHOTOELECTRIC DETECTOR

AX-250PLUS, AX-500PLUS

No. 59-1365-4 0902-05

INSTALLATION MANUAL

< STANDARD >

AX-350TF, AX-650TF

< 4 SELECTABLE BEAM FREQUENCIES >

Please read intsructions completely before beginning installation.

Photoelectric detectors detect intruders when both the upper and lower invisible infrared beams are simultaneously broken.

Maximum detection range between Transmitter and Receiver for the AX-250PLUS is 250ft. (75m), the AX-500PLUS is 500ft. (150m) and for the

AX-350TF is 350ft. (100m), the AX-650TF is 650ft. (200m)

• Beam interruption time adjustment

• Anti-Frost Structure

• Alignment level monitor jack

• Form C relay

• Tamper

• Option

• UL Listed

AX-350TF, AX-650TF ONLY

• LED indicator for fi ne beam alignment level

• Selectable beam frequencies

• Re-Transmit Circuit

• D.Q.Circuit (Environmental Disqualifi cation)

• Alarm Memory

FEATURES

: This function allows you to select the suitable beam interruption time for any environment.
: Prevents fog and condensation from blocking the beams.
: Can easily obtain maximum optical alignment by checking the voltage from this jack.
: Form C relay for more applications.
: N.C., Opens when cover is removed.
: Heating unit (HU-1), Back cover (BC-1) AX-Beam Tower (AX-BT)
:

For UL Listed applications, the heating unit (HU-1) shall not be installed with the models AX-350TF and AX-650TF.

: The optical alignment level can be checked at the Reciver.
: Crosstalk is eliminated with 4, channel selectable, beam frequencies. Used when stacking beams

or for long range applications.

: The advantage of this method is the elimination of wiring, from a detector or switch, back to the

control panel.

: The environmental compensation circuit is designed to eliminate false alarms caused by snow,

fog, heavy rain, ice and misalignment.

For Safe Use of the Product

• Read this instruction manual carefully prior to installation.

• After reading, store this manual carefully in an easily accessible place for reference.

• This manual uses the following warning indications for correct use of the product and harm to you or other people and damage to your assets, which
are described below. Be sure to understand the description before reading the rest of this manual.

WARNING

CAUTION

This symbol indicates prohibition. The specifi c prohibited action is provided in and/or around the fi guer.

This symbol requires an action or gives an instruction.

WARNING

CAUTION

Failure to follow the instructions provided with this indication and improper handling may cause death or serious injury.

Failure to follow the instructions provided with this indication and improper handling may cause injury
and / or property damage.

Do not use the product for purposes other than the detection of moving objects such as people and vehicles.
Do not use the product to activate a shutter, etc., which may cause an accident.

Do not touch the unit base or power terminals of the product with a wet hand (do not touch when the
product is wet with rain, etc.). It may cause electric shock.

Never attempt to disassemble or repair the product. It may cause fi re or damage to the devices.

Do not exceed the voltage or current rating specifi ed for any of the terminals during installation, doing so
may cause fi re or damage to the devices.

Do not pour water over the product with a bucket, hose, etc. The water may enter, which may cause damage
to the devices.

Clean and check the product periodically for safe use. If any problem is found, do not attempt to use the
product as it is and have the product repaired by a professional engineer or electrician.

CONTENTS

1.PARTS IDENTIFICATION ····································· P2

2.PRECAUTIONS ····················································· P2

3.INSTALLATION METHOD ···································· P3

4.AX-250/500PLUS
4-1.TERMINAL ······················································ P4
4-2.WIRING ··························································· P4
4-3.OPTICAL ALIGNMENT ·································· P5

5.AX-350/650TF
5-1.TERMINAL ······················································ P6
5-2.WIRING ··························································· P6
5-3.OPTICAL ALIGNMENT ·································· P7

6.BEAM INTERRUPTION

TIME ADJUSTMENT ············································ P8

7.AX-350/650TF
7-1.SELECTABLE BEAM FREQUENCIES ·········· P8
7-2.ALARM MEMORY ·········································· P8
7-3.DQ CIRCUIT ··················································· P9
7-4.RE-TRANSMITTING CIRCUIT ······················· P9

8.SPECIFICATIONS ··············································· P10

9.DIMENSIONS ······················································ P10

10.TROUBLE SHOOTING
CHECK SHEET ············································ P11,P12

1

1. PARTS IDENTIFICATION

(AX-350/650TF Receiver only)

STANDARD ACCESSORIES

○

Screws (4×20 Self tapping)×8

○

Screws (M4×30)×8

○

U-Shaped brackets

○

Beam Blocking Tool

2. PRECAUTIONS

1. Mount unit only on a solid surface.

(AX-350/650TF only)

(AX-350/650TF only)

×4

×2

2. Do not install the unit where objects
moved by the wind such as plants and
laundry, which may block the beam.

3. Prevent direct sunlight
from entering into internal
receiver.

4. A different type of beam
should not reach the receiver.

receiver

transmitter

transmitter

(other model)

5. Avoid aerial wiring.

6. Do not install the unit
on unsteady surfaces.

7. Mount the units more
than 1m away from the
wall or fence.

3.3 ft. (1m)

2

3. INSTALLATION METHOD

a. General

Detection range and installation height.

1

Maximum distances between Receiver and Transmitter are listed below.

AX-250PLUS = 250ft (75m) Max
AX-500PLUS = 500ft (150m) Max
AX-350TF = 350ft (100m) Max
AX-650TF = 650ft (200m) Max

and the installation height should be at 27"~40". (0.7~1m)

Alignment angle

2

b. Installation Method

1

Lossen the cover lock screw and remove the front cover. And loosen the
unit base mounting screw and remove mounting plate by sliding it down
against the unit base.

well mounting

2

Pole mounting

Two unit installation
(back to back)

Pole mounting

3

* Pole size should be as follews: 1 3/8"~1 7/8" O.D (Ф34~Ф48mm)

(Standard U.S. 1 1/4" or 1 1/2" pipe.)

* The length of the wiring cable out of the pole should be within 20

inches (60cm).

* Face transmitter and receiver towards each other when pole mounting.

NOTE

Pole Mount Back Cover Electric Box Mounting

Pull out the wire through the
wiring hole on the mounting
plate and attach the plate to
the well with the screw.

3

* Connect wire to the terminals

(See Sec. 4-1, 5-1 "Terminal").

Conduit Installtion

Place U-Shape brackets
at the top of the pole. And
pull out the wire through the
wiring hole og the Mounting
plate, attach the mouting
plate to the U-Shape bracket
with screw.

* After checking optical alignment

and operation check (See Sec. 4

-3, 5-3 OPTICAL ALIGNMENT),
replace the cover, and fasten
the lock screw tightly.

Fix two U-shape brackets in
layers on a pole, two units
can be installed back to back
on a pole at the same height.

For connections to single gang
electric boxes, follow intructions for
wall mounting.

1. Maximum torque requires to tighten the conduit shall not exceed 150 lb-in.

2. The conduit shall be bended before installing into the detector unit.

3. Excessive pulling of the conduit downward may cause slight cracking to the plastic conduit fitting.

Conduit can be installed directly into the bottom of the unit by removihg the
knockout on the bottom of the cover.

3

4. AX-250/500PLUS

4-1. TERMINAL

Receiver Transmitter

Wiring Distance

When using two or more units on one wire, the maximum length is obtained by dividing the wire length listed below by the
number of units used.
Power wires should not exceed the following length.

MODEL AX-250/500PLUS

WIRE SIZE 12V DC 24V DC

AWG22 (0.33mm2) 1300' (400m) 7500' (2300m)

AWG20 (0.52mm2) 2000' (600m) 12000' (3600m)

AWG18 (0.83mm2) 3300' (1000m) 19000' (5800m)

AWG16 (1.31mm2) 5000' (1500m) 30000' (9200m)

UL requires AX-250PLUS/500PLUS to be connected to a UL listed power supply capable of providing a
norminal input of 12VDC, (10.5~30VDC) 50mA and battery standby time of 4 hours.

4-2. WIRING

1 Set 2 Set in the line

WARNING

Do not exceed the voltage
or current rating specifi ed
for any of the terminals
during installation,
doing so might cause fi re
or damage to the devices.

4