OPTEK OVSASBC2R8 Technical data
Red PLCC4 Surface Mount LED
OVSASBC2R8
x High intensity with low power consumption
x White PLCC4 packaged in 8 mm tape on 7” diameter reel
x Compatible with automatic placement equipment
x Dimensions: 3.5 x 2.8 x 1.95 mm
x 120° viewing angle
The OVSASBC2R8 is designed for wide angle, uniform light output. Its internal reflector and colorless clear lens
optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides.
Applications
x Traffic lights
x Signal and symbol luminaire
x Mono-color indicators
x Backlighting (LCD, switches, displays and illuminated advertising)
x Interior automotive lighting (instrumentation clusters)
x Safety marker lights (steps, exit ways)
Product Photo Here
Part Number Material Emitted Color Intensity Typ. mcd
OVSASBC2R8
Moisture
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
AlInGaP Red 900
Lens Color
Water Clear
DO NOT LOOK DIRECTLY
AT LED WITH UNSHIELDED
EYES OR DAMAGE TO
RETINA MAY OCCUR.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue A 04/06
Page 1 of 4
Red PLCC4 Surface Mount LED
OVSASBC2R8
Absolute Maximum Ratings
TA = 25o C unless otherwise noted
Storage Temperature Range -40 ~ +100° C
Operating Temperature Range -40 ~ +100° C
Junction Temperature 110° C
Reverse Voltage 5 V
Continuous Forward Current 70 mA
Peak Forward Current (10% Duty Cycle, PW VHF 200 mA
Power Dissipation 225 mW
Electrical Characteristics
TA = 25o C unless otherwise noted
SYMBOL
I
Luminous Intensity 560 900 ---- mcd I
V
V
Forward Voltage ---- 2.5 3.2 V I
F
I
Reverse Current ---- ---- 10 µA V
R
PARAMETER MIN TYP MAX UNITS CONDITIONS
= 50 mA
F
= 50 mA
F
= 5 V
R
Dominant Wavelength 620 628 635 nm I
D
2 ½ 50% Power Angle ---- 120 ---- deg I
Standard Bins (I
= 50 mA)
F
Lamps are sorted to luminous intensity (IV) and dominant wavelength (D) bins shown.
Orders for OVSASBC2R8 may be filled with any or all bins contained as below.
1400
1120
(mcd)
Luminous Intensity
Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
900
710
560
620 635 628
Dominant Wavelength (nm)
W1
V2
V1
U2
= 50 mA
F
= 50 mA
F
Luminous intensity is at
U2 bin or above.
Issue A 04/06
Page 2 of 4
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Loading...