OPTEK OVSAABC2R8 Technical data

Amber PLCC4 Surface Mount LED

OVSAABC2R8

x High intensity with low power consumption
x White PLCC4 packaged in 8 mm tape on 7” diameter reel
x Compatible with automatic placement equipment
x Dimensions: 3.5 x 2.8 x 1.95 mm
x 120° viewing angle

The OVSAABC2R8 is designed for wide angle, uniform light output. Its internal reflector and colorless clear lens
optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides.

Applications

x Traffic lights
x Signal and symbol luminaire
x Mono-color indicators
x Backlighting (LCD, switches, displays, illuminated advertising)
x Interior automotive lighting (instrumentation clusters)
x Safety marker lights (steps, exit ways)

Product Photo Here

Part Number Material Emitted Color Intensity Typ. mcd

OVSAABC2R8

Moisture

RoHS

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

AlInGaP Amber 700

Lens Color

Water Clear

DO NOT LOOK DIRECTLY

AT LED WITH UNSHIELDED

EYES OR DAMAGE TO

RETINA MAY OCCUR.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

Issue A 04/06

Page 1 of 4

Amber PLCC4 Surface Mount LED

OVSAABC2R8

Absolute Maximum Ratings

TA = 25o C unless otherwise noted

Storage Temperature Range -40 ~ +100° C

Operating Temperature Range -40 ~ +100° C

Junction Temperature 110° C

Junction/Ambient1 300° C/W

Junction/Solder Point 150° C/W

Reverse Voltage 5 V
Continuous Forward Current 70 mA
Peak Forward Current (10% Duty Cycle, PW VHF 200 mA
Power Dissipation 225 mW

Note:

1. Rth test condition: Mounted on PC board FR 4 (pad size

Electrical Characteristics

TA = 25o C unless otherwise noted

SYMBOL

PARAMETER MIN TYP MAX UNITS CONDITIONS



2

)

I

Luminous Intensity 450 700 ---- mcd I

V

V

Forward Voltage ---- 2.6 3.2 V I

F

I

Reverse Current ---- ---- 10 µA V

R

Dominant Wavelength 584 591 596 nm I

D

2 ½ 50% Power Angle ---- 120 ---- deg I

Standard Bins (I

= 50 mA)

F

Lamps are sorted to luminous intensity (IV) and dominant wavelength (D) bins shown.
Orders for OVSAABC2R8 may be filled with any or all bins contained as below.

X2 X4 X3 X5

1120

900

710

V1

(mcd)

560

Luminous Intensity

450

584 596 590 587 593

Dominant Wavelength (nm)

V2

U2

U1

= 50 mA

F

= 50 mA

F

= 5 V

R

= 50 mA

F

= 50 mA

F

Luminous intensity is at
U1 bin or above.

Important Notes:

1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.

2. To designate luminous intensity ranks, please contact OPTEK.

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Issue A 04/06
Page 2 of 4

Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006