Optek OVLJBGD8, OVLJGGD8, OVLJRGD8 Schematics

Oval LED Lamp
(4 mm)

OVLJxGD8 Series

• High luminous intensity

• Defined spatial radiation

• Multiple viewing angles

• UV-resistant epoxy

• Precision optical performance

The OVLJxGD8 series is designed for superior performance in outdoor environments. Identical packages and

radiation patterns in red, green and blue create pixels for full-color video screens.

Applications

• Variable message signs

• Indoor/outdoor advertising signage

• Traffic and highway signs

• Full-color video signs

Product Photo Here

Part Number Material Emitted Color Intensity Typ. mcd

OVLJBGD8

InGaN Blue 300

Lens Color

Blue Diffused

OVLJGGD8 InGaN Green 1200 Green Diffused

OVLJRGD8

1 ANODE 2 CATHODE

AlInGaP Red 400 Red Diffused

[MILLIMETERS]

DIMENSIONS ARE IN:

INCHES

Moisture

RoHS

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

DO NOT LOOK DIRECTLY

AT LED WITH UNSHIELDED

EYES OR DAMAGE TO

RETINA MAY OCCUR.

Issue A.1 08/06

Page 1 of 7

Oval LED Lamp

OVLJxGD8

Absolute Maximum Ratings

TA = 25o C unless otherwise noted

Storage Temperature Range All -40 ~ +100° C

Operating Temperature Range All -40 ~ +95° C

Reverse Voltage All 5 V

Continuous Forward Current

Peak Forward Current (10% Duty Cycle, 1 kHz)

Power Dissipation

Lead Soldering Temperature (3 mm from the base of the epoxy bulb)

Note:

1. Solder time less than 3 seconds at temperature extreme.

1

All 260° C

Blue, Green 25 mA

Red 50 mA

Blue, Green 100 mA

Red 200 mA

Blue, Green 105 mW

Red 125 mW

Electrical Characteristics

TA = 25o C unless otherwise noted

SYMBOL

Iv Luminous Intensity

VF Forward Voltage

IR Reverse Current All ---- ---- 100 µA VR = 5 V

λD Dominant Wavelength

2Θ½H-H

2Θ½V-V ---- 50 ----

PARAMETER COLOR MIN TYP MAX UNITS CONDITIONS

Blue 145 300 ----

Green 770 1200 ----

Red 280 400 ----

Blue ---- 3.6 4.2

Red ---- 2.2 2.5

Blue 465 470 475

Red 620 624 628

---- 100 ----

50% Power Angle All

mcd IF = 20 mA

V IF = 20 mA Green ---- 3.6 4.2

nm IF = 20 mA Green 520 525 535

deg

IF = 20 mA

Issue A.1 08/06
Page 2 of 7

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

Oval LED Lamp

OVLJxGD8

Standard Bins (I

Lamps are sorted to luminous intensity (I

= 20 mA)

F

) and dominant wavelength (λD) bins shown.

V

Orders for OVLJxGD8 may be filled with any or all bins contained as below.

OVLJBGD8 (BLUE)

550

390

280

200

145

M

Luminous Intensity (mcd)

465 470 475

Dominant Wavelength (nm)

OVLJG

X7 X8 X9

2130

GD8 (GREEN)

Q

P

N

Luminous intensity is
at M bin or above.

Luminous Intensity (mcd)

1520

1100

770

S

525 530 535 520

U

T

Dominant Wavelength (nm)

OVLJR

550

390

Luminous

280 P

GD8 (RED)

Intensity (mcd)

620 628

Dominant Wavelength (nm)

Important Notes:

1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.

2. To designate luminous intensity ranks, please contact OPTEK.

3. Pb content <1000 PPM.

Luminous intensity is
at S bin or above.

Q

Luminous intensity is
at P bin or above.

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

Issue A.1 08/06

Page 3 of 7