OPTEK OVLEW5CB6 Technical data

White High-Intensity LED Lamp

(5 mm, 50° Viewing Angle)

OVLEW5CB6

x Wide beam angle
x High luminous intensity
x Blue LED + yellow phosphor
x ESD protected (±1kV, 1 time, [200pF 0 ])

The OVLEW5CB6 is a round 5 mm white high-intensity lamp with a 50° viewing angle and stand-offs. It is
designed for applications that require high luminous intensity, such as indoor and outdoor displays, marker lights
and optical indicators.

Applications

x Indoor/outdoor displays and applications
x Message boards
x Store front signage
x Indicators

Product Photo Here

Part Number Material Emitted Color Intensity Typ. mcd

OVLEW5CB6

InGaN White 1600

Lens Color

Water Clear

Moisture

RoHS

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

DO NOT LOOK DIRECTLY

AT LED WITH UNSHIELDED

EYES OR DAMAGE TO

RETINA MAY OCCUR.

Issue A .1 04/06

Page 1 of 5

White High-Intensity LED Lamp

OVLEW5CB6

Absolute Maximum Ratings

TA = 25o C (on metal core PCB) unless otherwise noted

Storage Temperature Range -40 ~ +100 °C

Operating Temperature Range -30 ~ +85 °C
Reverse Current
Continuous Forward Current 30 mA
Forward Current Reduction -0.50 mA/°C
Power Dissipation 120 mW

Note:

1.  = Zener Diode Rating.

100 mA

Electrical Characteristics

TA = 25o C (on metal core PCB) unless otherwise noted

SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS

IV Luminous Intensity 900 1600 2600 mcd I
VF Forward Voltage 2.8 3.4 3.9 V I
VR Reverse Voltage ---- ---- 2.5 V I

2 ½ 50% Power Angle ---- 50 ---- deg I

x
y ---- 0.320 ---- ---- I

Chromaticity Coordinates

---- 0.310 ---- ---- I

= 20 mA

F

= 20 mA

F

= 10 mA

R

= 20 mA

F

= 20 mA

F

= 20 mA

F

Standard Bins (I

= 20 mA)

F

Lamps are sorted to luminous flux (V) and chromaticity coordinates (x, y) bins shown.
Orders for OVLEW5CB6 may be filled with any or all bins contained as below.

1800-2600 6

1300-1800 5

Luminous

900-1300

Intensity (mcd)

Rank A0 B3

Chromaticity

Coordinates

Rank B5 B6

Chromaticity

Coordinates

Notes:

1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.

2. Pb content <1000 PPM.

3. To designate luminous intensity ranks, please contact OPTEK.

x 0.280 0.296 0.283 0.264 0.287 0.307 0.304 0.283 0.307 0.330 0.330 0.304
y 0.248 0.276 0.305 0.267 0.295 0.315 0.330 0.305 0.315 0.339 0.360 0.330

x 0.296 0.311 0.307 0.287 0.311 0.330 0.330 0.307 0.330 0.356 0.361 0.330
y 0.276 0.294 0.315 0.295 0.294 0.318 0.339 0.315 0.318 0.351 0.385 0.360

A0 B3 B4 B5 B6 C0

Chromaticity Coordinates (x, y)

4

Luminous Intensity is
at 4 bin or above.

B4

C0

Issue A .1 04/06
Page 2 of 5

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com