OPTEK OVLEW1CB9 Technical data

White High-Intensity LED Lamp
(5 mm, 15° Viewing Angle)

OVLEW1CB9

• Narrow beam angle

• High luminous intensity

• Water clear plastic package

• InGaN White

• Pb-free

The OVLEW1CB9 is a round 5 mm white high-intensity lamp with a 15° viewing angle. It is designed for
applications that require high luminous intensity, such as indoor and outdoor displays, marker lights and optical
indicators. The phosphor used in the reflector converts the blue emission of the InGaN chip to ideal white light so
that the best mode of white light intensity and CIE chromaticity are achieved.

Applications

• Indoor/outdoor displays and applications

• Message boards

• Store front signage

• Indicators

Part Number Material Emitted Color Intensity Typ. mcd

OVLEW1CB9

Moisture

RoHS

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

InGaN White 18000

1 ANODE 2 CATHODE

[MILLIMETERS]

DIMENSIONS ARE IN:

INCHES

Lens Color

Water Clear

DO NOT LOOK DIRECTLY

AT LED WITH UNSHIELDED

EYES OR DAMAGE TO

RETINA MAY OCCUR.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

Issue B 10/06

Page 1 of 5

White High-Intensity LED Lamp

OVLEW1CB9

Absolute Maximum Ratings

TA = 25o C

Storage Temperature Range -40 ~ +100 ° C

Operating Temperature Range -40 ~ +95 ° C

Reverse Voltage 5 V

Continuous Forward Current 25 mA

Peak Forward Current (10% Duty Cycle, 1 KHz) 100 mA

Power Dissipation 100 mW

Lead Soldering Temperature (3 mm from the base of the epoxy bulb)1 260° C

Electrostatic Discharge 150 V

Note:

1. Solder time less than 3 seconds at temperature extreme.

Electrical Characteristics

TA = 25o C

SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS

IV Luminous Intensity 8200 18000 23500 mcd IF = 20 mA

VF Forward Voltage ---- 3.4 4.0 V IF = 20 mA

IR Reverse Current ---- ---- 100 µA VR = 5 V

2 Θ½ 50% Power Angle ---- 15 ---- deg IF = 20 mA

x

y ---- 0.32 ---- ---- IF = 20 mA

Chromaticity Coordinates

---- 0.31 ---- ---- IF = 20 mA

Standard Bins (I

= 20 mA)

F

Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x, y) bins shown.
Orders for OVLEW1CB9 may be filled with any or all bins contained as below.

23500

16800

12000

8200

Luminous Intensity (mcd)

A1

A2

Chromaticity Coordinates (x, y)

Rank

Chromaticity
Coordinates

Rank

Chromaticity
Coordinates

Notes:

1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.

2. Pb content <1000 PPM.

3. To designate luminous intensity ranks, please contact OPTEK.

x 0.245 0.264 0.280 0.264 0.264 0.283 0.296 0.280 0.283 0.307 0.313 0.296

y 0.229 0.267 0.248 0.220 0.267 0.305 0.276 0.248 0.305 0.337 0.297 0.276

x 0.307 0.330 0.330 0.313 0.330 0.361 0.356 0.330

y 0.337 0.360 0.318 0.297 0.360 0.385 0.351 0.318

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

A1 A2

B2 c

B1 A2 c

Z2

Z1

Z

Luminous Intensity is

at Z bin or above.

B1

Issue B 10/06
Page 2 of 5

Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006