OPTEK OPR2100L Datasheet

Prod uct Bul le tin OPR2100L PRE LIMI NARY

August 1996

Six Element SMD LED Array

Type OPR2100L

Fea tures

• Surface mountable

• High temperature operation

• Closely matched emissions

• Matched to OPR2100 Photodiode

Array

Ab so lute Maxi mum Rat ings (Each chan nel, T

Re verse Volt age. . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V

Con ti nous For ward Cur rent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA

Peak For ward Cur rent (1 µA pulse width, 300 pps) . . . . . . . . . . . . . . . . . . . . . . . 1.0 A

Stor age and Op er at ing Tem pera ture . . . . . . . . . . . . . . . . . . . . . . . . -55o C to +125o C

Power Dis si pa tion (der ate @ 1.00 mW/o C above 25o C). . . . . . . . . . . . . . . . 100 mW

= 25o C un less oth er wise noted)

A

De scrip tion

Enclosed in a compact polyimide chip
carrier, this six element LED has been
specifically designed to be used as an
illuminating source for the OPR2100.
The light is spectrally matched to the
responsivity for maximum efficency. The
six chips are bonded with common
cathodes and individual anodes to allow
channel matching. The package can
withstand multiple exposures to the most
demanding solder conditions. The wrap
around solder pads are gold plated for
exceptional storage and wetting
characteristics.

PIN OUT:
PIN#1 ANODE A
2 ANODE F
3 ANODE E
4 COMMON CATHODE
5 ANODE D
6 ANODE C
7 ANODE B
8 COMMON CATHODE

Elec tri cal Char ac ter is tics (TA = 25o C un less oth er wise noted)

SYM BOL PA RAME TERS MIN TYP MAX UNITS TEST CON DI TIONS

P

O

V

F

I

R

λ

t

r

t

f

Total Optical Power
Forward Voltage Drop
Reverse Leakage Current
Peak Wavelength
Rise Time
Fall Time

350 µW

1.8 V

100 µA

870 910 nm

600 ns
350 ns

IF = 20 mA
IF = 20 mA
VR = 2 V
IF = 20 mA
IP = 100 mA
IP = 100 mA

Op tek Tech nol ogy, Inc. 1215 W. Crosby Road Car roll ton, Texas 75006 (972) 323- 2200 Fax [phone]

9-18