OPTEK OPF341A, OPF341B, OPF341D, OPF341C Datasheet
Fea tures
• Component pre-mounted and ready
to use
• Pre-tested with fiber to assure
performance
• Popular SMA style receptacle
• High Speed
• Electrically isolated from case
De scrip tion
The OPF341 series LED consists of a
hermetic LED, pre-mounted and aligned
in an SMA receptacle. This configuration
is designed for PC board or panel
mounting. Includes lock washer and jam
nut, two 2-56 screws, and a dust cap.
The LED’s are designed to interface with
multimode optical fibers from 50/125 to
200/300 microns.
Ab so lute Maxi mum Rat ings (TA = 25o C un less oth er wise noted)
Re verse Volt age. . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0 V
Con tinu ous For ward Cur rent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA
(4)
Stor age Tem pera ture Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55o C to +150o C
Op er at ing Tem pera ture Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40o C to +125o C
Lead Sol der ing Tem pera ture [1/16 inch (1.6 mm) from case for 5 sec. with sol der ing
iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240o C
(1)
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 sec. max when flow soldering.
(2) Graded index fiber, 50 µm core, N.A. = 0.20.
(3) To convert radiant power output to dBm, use the following expression dBm = 10 log
(µW/1000).
(4) Derate linearly @ 1.0 mA/o C above 25o C.
(5) Prebias @ 5 mA current.
LED Burn-in
All LED's are subject to 100% burn-in testing. Test conditions are 96 hours at 100 mA
continuous current in 25o C ambient.
Prod uct Bul le tin OPF341
August 1996
Fi ber Op tic GaA lAs High Speed LED in SMA Re cep ta cle
Types OPF341A, OPF341B, OPF341C, OPF341D
TYPI CAL COU PLED POWER into OP TI CAL FI BER
Typi cal Cou pled Power
IF = 100 mA @ 25o C
Fi ber Re frac tive
In dex
N.A. OPF341D OPF341C OPF341B OPF341A
50/125 µm
Graded 0.20
7.5 µW 12.5 µW 18 µW 25 µW
62.5/125 µm
Graded 0.28
14 µW 22 µW 34 µW 45 µW
100/140 µm
Graded 0.29
38 µW 62 µW 95 µW 125 µW
200/300 µm*
Step 0.41
140 µW 235 µW 340 µW 475 µW
*PCS - Plas tic Clad Sil ica
Op tek Tech nol ogy, Inc. 1215 W. Crosby Road Car roll ton, Texas 75006 (972) 323- 2200 Fax (972) 323- 2396
8-40
Types OPF341A, OPF341B, OPF341C, OPF341D
Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Op tek Tech nol ogy, Inc. 1215 W. Crosby Road Car roll ton, Texas 75006 (214)323- 2200 Fax (214)323- 2396
Elec tri cal Char ac ter is tics (TA = 25o C un less oth er wise noted)
SYM BOL PA RAME TER MIN TYP MAX UNITS TEST CON DI TIONS
P
O
Radiant Power Output OPF341D
OPF341C
OPF341B
OPF341A
5.0
10.0
15.0
20.0
7.5
12.5
18.0
25.0
µW
IF = 100 mA
(2)
V
F
Forward Voltage 1.8 2.0 V IF = 100 mA
λp
Peak Output Wavelength
830 850 870 nm
IF = 50 mA
B Spectral Bandwidth Between Half Power Points 35 nm IF = 50 mA
t
r
Output Rise Time 4.5 6.0 ns IF = 100 mA, 10%-90%
(5)
t
f
Output Fall Time 4.5 6.0 ns IF = 100 mA, 90%-10%
(5)
Typi cal Per form ance Curves
Temperatures are
stepped in 25o C
increments.
-50o C
100o C
8-41
Relative Coupled Power vs.
Forward Current
Forward Current - mA
-50o C
100o C
Temperatures are
stepped in 25o C
increments.
Forward Voltage vs.
Forward Current
Forward Current - mA
Loading...