OPTEK OPB690 Datasheet
Prod uct Bul le tin OPB690
July 1996
Slotted Optical Flag Switch
Type OPB690
Fea tures
• Phototransistor output
• Mechanical switch replacement
• 3-pin connector (Ho Tien L2561-03),
Molex compatible connector 5102
series housing and 5103 series
terminal
• Enhanced signal to noise ratio
De scrip tion
The OPB690 consists of an NPN
phototransistor and an infrared emitting
diode in a molded plastic housing. The
phototransistor has an enhanced low
current roll-off which improves contrast
ratio and immunity to background
irradiance. A lever arm actuated flag
interrupts the light beam, switching the
transistor output between states that can
readily drive logic gates.
This switch is designed to easily snap
mount into a 0.037" ± 0.001" (0.94 mm)
thick material with a rectangular opening
of 0.320" ± 0.003" x 0.472" (8.13 mm x
11.99 mm) minimum. Insertion into the
punched side of metal is recommended.
Customized lever arms and spring
torques can be designed for specific
applications.
Ab so lute Maxi mum Rat ings (TA = 25o C un less oth er wise noted)
Stor age and Op er at ing Tem pera ture . . . . . . . . . . . . . . . . . . . . . . . . -40o C to +100o C
In put Di ode
For ward DC Cur rent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Peak For ward Cur rent (1 µs pulse width, 300 pps) . . . . . . . . . . . . . . . . . . . . . . . 3.0 A
Re verse DC Volt age. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 V
Power Dis si pa tion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW
(1)
Out put Pho to tran sis tor
Collector- Emitter Volt age. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Emit ter Re verse Cur rent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA
Col lec tor DC Cur rent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Power Dis si pa tion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mW
Notes:
(1) Der ate line arly 1.33 mW/o C above 25o C.
(2) Der ate line arly 2.0 mW/o C above 25o C.
(3) “Off” con di tion ex ists when the lever arm is in the rest po si tion (20o from ver ti cal) as shown in
the fig ure.
(4) “On” con di tion ex ists when the lever arm is de flected clock wise 18o +/- 3o form the rest po si -
tion (20o from ver ti cal) as shown in the fig ure.
(5) From the rest po si tion to the switch point, lever torque meas ured at the end of the arm is 1.5
grams max.
(2)
Op tek Tech nol ogy, Inc. 1215 W. Crosby Road Car roll ton, Texas 75006 (972)323- 2200 Fax (972)323- 2396
12-60
Type OPB690
Elec tri cal Char ac ter is tics (TA = 25o C un less oth er wise noted)
SYM BOL PA RAME TER MIN MAX UNITS TEST CON DI TIONS
In put Di ode
V
I
R
Out put Pho to tran sis tor
V
(BR)CEO
I
ECO
I
CEO
Cou pled
V
SAT
I
C(ON)
Forward Voltage 1.6 V IF = 10 mA
F
Reverse Current 100
µA
Collector-Emitter Breakdown Voltage 30 V
Emitter Reverse Current 100
µA
Collector-Emitter Dark Current 100 nA VCE = 5 V
Saturation Voltage 0.4 V
On-State Collector Current 600
µA
VR = 3.0 V
IC = 100 µA
VEC = 0.4 V
IF = 10 mA, IC = 100 µA, Gap unblocked
IF = 10 mA, VCE = 5 V
Forward Current vs Forward
Voltage Input Diode
IF @ 500 ms pulse width
IF - Forward Current - mA
Rise and Fall Time vs Load
Resistance
Collector Dark Current vs Ambient
Temperature
VCE = 5 V
IF = 0 mA
TA - Ambient Temperature - oC
Normalized Output Current vs
Forward Current
Normalized Output Current vs
Ambient Temperature
VCE = 5 V
IF = 10 mA
Normalized to
TA = 25o C
TA - Ambient Temperature - oC
Normalized Forward Voltage vs
Ambient Temperature
VCE = 5 V
t
t
r
f
IF = 10 mA (50% Duty Cycle)
VCC = 5 V
RL - Load Resistance - Ω
IF - Forward Current - mA
Normalized to
IF = 10 mA
VCE = 5 V
IF = 10 mA
Normalized to
TA = 25o C
TA - Ambient Temperature - oC
Op tek re serves the right to make changes at any time in or der to im prove de sign and to sup ply the best prod uct pos si ble.
Op tek Tech nol ogy, Inc. 1215 W. Crosby Road Car roll ton, Texas 75006 (972)323- 2200 Fax (972)323- 2396
12-61
Loading...