OPLENIC Pro-MicroScan User Manual

User Manual

Pro-MicroScan

Microscope Digital Camera

BASIC USER MANUAL

Version 3.0

USB 2.0 CAMERA

User Manual

WARNI NG!

TO AVO ID TH E RISK OF FIRE OR ELE CT R ICAL SHOCK. N EVER EXPOSE THIS PRO DUC T TO WATER OR
OPER ATE IN A HIGH HU MIDIT Y EN VIRONME NT.

Keep camera away from the following:

High temperatures and excessive humidity
Direct sunlight or other heat sources
Dust
Extreme vibration

If the camera lens becomes dirty, first try blowing dust particles from it.
Next use a lint free cloth or proper lens cleaning cloth to wipe the lens gently.
Only use approved lens cleaning fluids. Never touch the lens with your
fingers! Do not allow the camera to come into contact with water or any
other liquid. If water or a foreign substance should get in the camera,
unplug the camera immediately and do not attempt to plug in until after a
long period of time to allow for drying. This does not necessarily mean it will
work again! Do not open the camera case or attempt your own repairs.
Internal components may create risk of electrical shock or fire. There are no
user serviceable components inside. Clean the outside of the camera by
wiping with a clean, dry cloth. Never use harsh or abrasive cleaners or
organic solvents on the camera or any of its parts. If you notice smoke or a
strange smell coming from the camera, immediately unplug the camera and
consult an authorized dealer.

User Manual

Trademark and Copyright information

© COPYRIGHT 2008, OPLENIC

All rights are reserved. No part of this document may be photocopied,

reproduced, or translated to another language without the prior written

consent of OPLENIC. The information contained in this document is subject

to change without notice. OPLENIC shall not be liable for errors contained

herein or for consequential damages in connection with the furnishing,

performance or use of this material.

Microsoft

®

and Windows® are U.S. registered trademarks of Microsoft

Corporation.

Welcome

Thank you for buying OPLENIC Pro-MicroScan high resolution USB2.0 camera. We

suggest you spend a few minutes carefully reading this user manual before

installing and using your camera.

Please keep this user manual in a safe place for future reference.

User Manual

Warnings and Precautions

Precautions when using your Pro-MicroScan

Keep camera away from the following:

· High temperatures and excessive humidity

· Direct sunlight or other heat sources

· Dust

· Extreme vibration

If the imaging sensor lens becomes dirty, first try blowing dust particles from it.

Next use a lint free cloth or proper lens cleaning cloth to wipe the lens gently.

Only use approved lens cleaning fluids. Never touch the lens with your fingers!

Do not allow the camera to come into contact with water or any other liquid. If

water or a foreign substance should get in the camera, unplug the camera

immediately and do not attempt to plug in until after a long period of time to

allow for drying. This does not necessarily mean it will work again! Do not open

the camera case or attempt your own repairs. Internal components may create risk

of electrical shock or fire. There are no user serviceable components inside.

Clean the outside of the camera by wiping with a clean, dry cloth. Never use harsh

or abrasive cleaners or organic solvents on the camera or any of its parts.

If you notice smoke or a strange smell coming from the camera, immediately

unplug the camera and consult an authorized dealer.