![](/html/ed/edfa/edfa21e47af0ef04cacf1c3211da00713f757f89cae21f705f4c623da3fe1650/bg1.png)
OWNER’S MANUAL
Model 5100F
RF POWER AMPLIFIER
0.8 – 2.5 GHz, 25 Watts
Ophir RF
5300 Beethoven Street
Los Angeles, CA 90066
USA
Tel.: (310) 306-5556
FAX: (310) 577-9887
E-mail: sales@ophirrf.com
Website: www.ophirrf.com
OM_5100F 12/12/01
Advanced Test Equipment Rentals
www.atecorp.com 800-404-ATEC (2832)
®
E
s
t
a
b
l
i
s
h
e
d
1
9
8
1
![](/html/ed/edfa/edfa21e47af0ef04cacf1c3211da00713f757f89cae21f705f4c623da3fe1650/bg2.png)
___________________________________________________
Certification
Ophir RF certifies that this product met its published specifications at the time of
shipment from the factory.
_____________________________________________________________________
Warranty
This Ophir RF product is warranted against defects in material and workmanship for a
period of two (2) years from date of receipt. During the warranty period, Ophir RF, will,
at its option, either repair or replace products that prove to be defective. For warranty
service or repair, this product must be returned to a service facility designated by
Ophir RF.
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from improper or
inadequate maintenance by Buyer, Buyer-supplied software or interfacing,
unauthorized modification or misuse, operation outside of the environmental
specifications for the product, or improper site preparation or maintenance.
NO OTHER WARRANTY IS EXPRESSED OR IMPLIED. OPHIR RF
SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Exclusive Remedies
THE REMEDIES PROVIDED HEREIN ARE BUYER’S SOLE AND EXCLUSIVE
REMEDIES. OPHIR RF SHALL NOT BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
WHETHER BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL
THEORY.
_____________________________________________________________________
Assistance
For any assistance, contact your Ophir RF Sales and Service Office.
OM_5100F 12/12/01 Page 1 of 14
![](/html/ed/edfa/edfa21e47af0ef04cacf1c3211da00713f757f89cae21f705f4c623da3fe1650/bg3.png)
_____________________________________________________________________
Safety Information
The following safety notes and symbol are used in this manual and on the equipment.
Familiarize yourself with each and its meaning before operating this equipment.
Caution Caution denotes a hazard. It calls attention to a procedure that, if not
correctly performed or adhered to, would result in damage to, or
destruction of, the equipment. Do not proceed beyond a caution note
until the indicated conditions are fully understood and met.
_____________________________________________________________________
Warning Warning denotes a hazard. It calls attention to a procedure which, if
not correctly performed or adhered to, could result in injury or loss
of life. Do not proceed beyond a warning note until the indicated
conditions are fully understood and met.
_____________________________________________________________________
The instruction documentation symbol. The product is marked with this
symbol when it is necessary for the user to refer to the instructions in the
documentation.
_____________________________________________________________________
General Safety Considerations
Warning This is a safety Class I product provided with a protective earthing
ground incorporated in the AC power cord. The AC power cord
shall only be inserted in a socket outlet provided with a protective
earth contact. Any interruption of the protective conductor, inside
or outside of the equipment, is likely to make the equipment
dangerous. Intentional interruption is prohibited.
_____________________________________________________________________
Warning No operator serviceable parts inside. Refer servicing to qualified
personnel. To prevent electrical shock, do not remove covers.
_____________________________________________________________________
Warning If this equipment is used in a manner not specified by Ophir RF, the
protection provided by the equipment may be impaired.
_____________________________________________________________________
Caution Before switching on this equipment, make sure that the line voltage is
correct and that an External Load has been applied. (Refer to 2.2.3)
OM_5100F 12/12/01 Page 2 of 14
![](/html/ed/edfa/edfa21e47af0ef04cacf1c3211da00713f757f89cae21f705f4c623da3fe1650/bg4.png)
Contents
Section Page
I General Information 5
Declaration of Conformity 5
Scope 5
Description 5
Equipment Specifications 6
II Installation 7
Incoming Inspection 7
Preparation for Use 7
Power Requirements 7
Earthing 7
Load Requirements 7
Cable Connections 7
III Operation 8
Introduction 8
Statement Against Unspecified Use 8
Controls, Indicators, and Connectors 8
Basic Operating Procedures 8
Before Turn On 8
Turn On 9
Operation 9
Turn Off 9
IV Maintenance 10
Introduction 10
Performance Test 10
Adjustment Procedures 10
Troubleshooting Procedures 10
Improper Power Distribution 10
Low or No RF Output Power 10
Cleaning 10
V Customer Service 11
Servicing 11
Return Material Authorization (RMA) 11
Repackaging for Shipment 11
RMA Request Form 12
OM_5100F 12/12/01 Page 3 of 14