Step 1 Step 2
Step 3 Step 4
PEDESTAL TRANSITIONAL BASE
ASSEMBLY INSTRUCTION
*
Don't attempt to repair or modify parts
that are broken or defective.Please
contact the store immediatedly.
*
Must tighten screws periodically.With
use screws will become loose.Check
tightness of all screws every 6-8 weeks.
Keep all hardware parts out of reach
of children.
*
Important Notes
Do not tighten all screw / bolt until all
completly assembled
*
MADE IN MALAYSIA
Hexagon Nut
5
16" x 7mm
Spanner 12.8mm
Flat Washer
5
16" x 22mm
List of hardware For 1 Set
List of Part For 1 Set
Spring Washer
5
16"
a
b
c
d
01
02
03
04
Table Top
1
1
1
4
1
12
12
Size : 45" x 45" x 63" x 30 "H
Thank you for purchasing this quality product. It has been engineered for easy assembly yet constructed for
durability. Be sure to check all packing material carefully for small parts, which may have come loose inside the
carton during shipment. Identify and count all parts and compare with the part lists below.
Please be sure to read the notes section at the bottom of the page, and follow the instruction while assembling.Thank you
Notes
*
Place all wooden parts on a clean and
smooth surface such as a rug or carpet
to avoid the parts from being scratched.
Check to be sure that you have all
parts and hardware.
*
Remove all wrapping materials
including staples & packing straps
before you start to assemble.
*
Care And Maintenance
The Touch of a soft cloth is all the
maintenance your wood pieces will
ever need.
Never use harsh chemicals or abrasive
cleaner as they could mark or destroy
finish.
*
*
Part
Code
Figure
Qty.
HardwareCode
Figure
Qty.
Assembly Completed !!
Unlock the Cam Lock under
the table before Side Leaf
assembled then lock it.
on
off
Pedestal
Base Leg
a
b
c
d
a
b
c
d
Remove the
plastic
cover from
the
Pedestal
and
Footings.
Remove the plastic
cover from the
Pedestal and
Footings.
12
Center Leaf
03
04
04
04
04
04
04
04
03
02
01
01
Loading...